|
Protec 8"
1200
PSI
Fiberglass (FRP) Seawater Pressure
Vessel Membrane Housings
The
PROTEC™ Model PRO-8-1200-EP & PRO-8-1200-SP
pressure vessels are designed for continuous use as housing for
RO membrane filtration elements to purify typical
seawater at any positive pressure up to 1200 PSI.
The PPRO-8-1200-EP & PRO-8-1200-SP
membrane housings will accommodate any make of eight-inch nominal
diameter spiral-wound membrane element as well as many
hollow fiber membrane elements. The element interface
hardware for the specified element is supplied with the
pressure vessel.
The Model PRO-8-1200-EP & PRO-8-1200-SP
membrane housings have been designed to meet the standards of the
American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel
Code, Section X. At an additional cost, vessels can be inspected during
fabrication by an ASME Authorized Inspector and Code stamped.
|
|
1200 PSI |
|
3-11 |
|
|
20ºF |
- Cleaning pH Range (<30 min.)
|
2-12 |
|
|
120º |
|
Typ. Seawater |
|
|
1800 PSI |
|
≤ 45,000 ppm
Max. |
|
|
7200 PSI |
|
|
|
*Please
advise while ordering membrane pressure vessel if continuous operating temperature is less
than 45ºF. |
|
End Port Membrane Housing Pressure Vessels
Traditional vessel housings
with the feed and concentrate connections located in the end closure of the
pressure vessel head.
|
Protec Vessel Model
# |
Old AMI
Model No. |
# of 8"x40" membrane elements per
housing |
Design Pressure |
Vessel Length |
Specification Sheets
and Engineering Drawings |
Image |
|
Inches |
MM |
|
PRO-8-1200-EP-1 |
PV8040PRO1200 |
1 |
1200 PSI |
65" |
1651 |
 |
 |
|
PRO-8-1200-EP-2 |
PV8080PRO1200 |
2 |
1200 PSI |
105" |
2667 |
|
PRO-8-1200-EP-3 |
PV80120PRO1200 |
3 |
1200 PSI |
145" |
3683 |
|
PRO-8-1200-EP-4 |
PV80160PRO1200 |
4 |
1200 PSI |
185" |
4699 |
|
PRO-8-1200-EP-5 |
PV80200PRO1200 |
5 |
1200 PSI |
225" |
5715 |
|
PRO-8-1200-EP-6 |
PV80240PRO1200 |
6 |
1200 PSI |
265" |
6731 |
Side Port Membrane Housing Pressure Vessels
Side ported membrane housing vessels with feed and
concentrate connections located in the side wall of the
pressure vessel shell.
|
Protec Vessel Model
# |
Old AMI
Model No. |
# of 8"x40" membrane elements per
housing |
Design Pressure |
Vessel Length |
Specification Sheets
and Engineering Drawings |
Image |
|
Inches |
MM |
|
PRO-8-1200-SP-1 |
PV8040PRO1200SP |
1 |
1200 PSI |
61.6 |
1565 |
|
 |
|
PRO-8-1200-SP-2 |
PV8080PRO1200SP |
2 |
1200 PSI |
101.6 |
2581 |
|
PRO-8-1200-SP-3 |
PV80120PRO1200SP |
3 |
1200 PSI |
141.6 |
3597 |
|
PRO-8-1200-SP-4 |
PV80160PRO1200SP |
4 |
1200 PSI |
181.6 |
4613 |
|
PRO-8-1200-SP-5 |
PV80200PRO1200SP |
5 |
1200 PSI |
221.6 |
5629 |
|
PRO-8-1200-SP-6 |
PV80240PRO1200SP |
6 |
1200 PSI |
261.6 |
6645 |
| 
