2.5" Fiberglass Membrane Housing Pressure Vessels
Description
Corrosion resistant filament wound fiberglass reinforced epoxy tubing suitable for seawater conditions. This style of fiberglass membrane housing is designed for direct connection to AMI/Applied Membranes and FilmTec/DOW male style elements.
Configuration
Retaining Plate and Screws
|
|
Specifications
Maximum Operating Pressure: 1,000 PSI (68 BAR)
Operating Temperature Range: 20°F to 122°F (-7°C to 50°C)
Materials: FRP/Fiberglass Body, Filament wound fiberglass reinforced epoxy tubing, End Plugs PVC, End Rings Aluminum |
Membrane Housing Pressure Vessels
| Model No. |
For Membranes
(Dia." x Length") |
Vessel Outer Dia.
In. (cm.) |
Vessel Length (L)
In. (cm.) |
Connection Sizes |
| Feed |
Brine |
Prod. |
| PV2521PR1000 |
2.5" x 21" |
3.2 (8.2) |
24.5 (62) |
3/4"-16 SAE J514 Straight Female Thread |
3/4"-16 SAE J514 Straight Female Thread |
1/8" NPT Female Thread |
| PV2540PR1000 |
2.5" x 40" |
3.2 (8.2) |
43.5 (109) |
3/4"-16 SAE J514 Straight Female Thread |
3/4"-16 SAE J514 Straight Female Thread |
1/8" NPT Female Thread |
Note: Fiberglass Membrane Pressure Vessels sold complete with End Plugs and end closure hardware. Mounting hardware not included.
Spare Parts
| Model No. |
Description |
Qty Per Vessel |
| FT-PV-40W or FT-PV-20W |
2.5"x40" or 2.5"x21 Vessel |
1 |
| FT-PV-EP2 |
End plug |
2 |
| KIT-PVA-SEAL |
O-Ring Kit |
1 |
| FT-PV-ER |
End Ring |
2 |
| PL-HP-1/8 |
Product Port Plug, 1/8" Nylon |
3 |
| HDW-TL-CYLT |
Spanner Wrench |
1 |
| PL-NP-1/8N |
Close Nipple, 1/8" Nylon |
1 |
| PL-FTE-1/8X1/4P |
Elbow Tube Fitting 1/8"x1/4" |
1 |
| KIT-PV-25PVMK |
2.5" Vessel Mounting Kit |
1 |
Feed/Brine Port Fittings
| Model No. |
Description |
Qty Per Vessel |
| PL-MTS-3/4SX1/2 |
Tube Fitting 3/4-16 SAE x 1/2" |
2 |
| PL-MFF-3/4SX1/2 |
37Deg JIC Flare 3/4-16 SAE x 1/2" |
2 |
|
 |
Obsolete Membrane Housing Pressure Vessels
Please note that the below part s have been discontinued by the manufacturer and are available in limited quantities only.
Specifications will be retained here for reference and replacement information only.
| OBSOLETE Model No. |
Closest Replacement |
For Membranes
(Dia" x L") |
Pressure Rating |
Vessel
Dia.
In. (cm.) |
Vessel Length
In. (cm.) |
Connection, FNPT, In (MM) |
| Feed |
Brine |
Prod. |
| PV2514AM1000 |
None. |
2.5 x 14 |
1000 PSI |
2.8 (7) |
17 (43) |
¼ (6) |
¼ (6) |
¼ (6) |
| PV2521AM1000* Limited Quantities Available |
PV2521PR1000 |
2.5 x 21 |
1000 PSI |
2.8 (7) |
24 (61) |
¼ (6) |
¼ (6) |
¼ (6) |
| PV2540AM1000* Limited Quantities Available |
PV2540PR1000 |
2.5 x 40 |
1000 PSI |
2.8 (7) |
43 (109) |
¼ (6) |
¼ (6) |
¼ (6) |
| PV2580AM1000 |
None. |
2.5 x 40 (Qty 2) |
1000 PSI |
2.8 (7) |
83 (211) |
¼ (6) |
¼ (6) |
¼ (6) |
Spare Parts for Obsolete 2.5" FRP Membrane Housings
Please note that the below parts have been discontinued by the manufacturer are available in limited quantities only. Please contact our customer service department for price and availability.
| Model No. |
Description |
Qty. Per Vessel |
| PV-EP25AMS1000 |
End Plug, Single Feed Port |
1 |
| PV-EP25AMD1000 |
End Plug, Dual Port, Permeate/Concentrate End |
1 |
| PV-BP25AM1000 |
Bearing Plate |
2 |
| PV-RW26AM1000 |
Retaining Wedges |
4 |
| PV-WB026 |
Wedge Bolt |
4 |
| PV-OR25-228N |
O-Ring, External Nitrile Material |
2 |
| PV-OR40-210N |
O-Ring, Internal Nitrile Material |
2 |
|
