|
2.5"
PVC Membrane Pressure Vessels
Description
Attractive 2.5" (diameter) PVC
pressure vessels available for 14", 21" and 40"
(length) membrane elements. This style is designed for direct
connection to
 /Applied
Membranes and FilmTec
male style elements.
Configuration
U-Pin Style
End Entry |
 |
Specifications
Maximum Operating Pressure: 200
PSI (14 BAR)
Materials: Rigid PVC; PVC end plugs; PVC
reinforcement cuff; Stainless steel cuff bands
|
Model
No. |
For
Membranes: |
Vessel
Diameter |
Vessel
Length |
Connection,
FNPT |
|
Diamter |
Length |
Feed |
Brine |
Product |
|
in. |
cm. |
in. |
cm. |
in. |
cm. |
in. |
cm. |
in. |
mm. |
in. |
mm. |
in. |
mm. |
| PV2514PVCAU |
2.5 |
6.5 |
14 |
35 |
2.5 |
6.5 |
19 |
48 |
0.25 |
6.4 |
0.25 |
6.4 |
0.25 |
6.4 |
| PV2521PVCAU |
2.5 |
6.5 |
21 |
53 |
2.5 |
6.5 |
25.75 |
65 |
0.25 |
6.4 |
0.25 |
6.4 |
0.25 |
6.4 |
| PV2540PVCAU |
2.5 |
6.5 |
40 |
102 |
2.5 |
6.5 |
45 |
114 |
0.25 |
6.4 |
0.25 |
6.4 |
0.25 |
6.4 |
Note: Pressure Vessels sold complete with End Plugs, U-Pins, Feed Plug and O-Rings.
Mounting Pads and Straps not Included.
Spare Parts
|
Part Number |
Description |
Qty. Per Vessel |
Image |
| PV-EP25PVC |
End Plug with O-Rings |
2 |
 |
| PV-RR25U1 |
U-Pin |
2 |
| PV-OR40-330 |
O-Ring for End Plug- External |
2 |
| PV-OR40-210 |
O-Ring for End Plug -
Internal |
2 |
| YF3850002 |
Plug for feed end, 1/4"
|
1 |
Warning:
PVC pressure vessels are limited to a maximum pressure of 200 psi (14 BAR) at
77°F (25°C). Higher pressure, higher temperature water or water hammer
will lead to a premature failure. It is highly recommended that when these
conditions exist, a pressure switch or relief valve be installed to protect the
vessel. Alternately, you may consider a stainless steel or FRP vessel. This page was
last updated 10/27/2006 | 
