The
PROTEC™ Model PRO-8-600-EP & PRO-8-600-SP
pressure vessels are designed for continuous use
as housing for membrane filtration elements to purify typical brackish
waters at any positive pressure up to 600 PSI.
The PRO-8-600-EP & PRO-8-600-SP
membrane housings will accommodate any make of eight-inch nominal
diameter spiral-wound element as well as many hollow fiber elements. The
element interface hardware for the specified membrane
element is supplied with the pressure vessel.
The Model PRO-8-600-EP & PRO-8-600-SP
membrane housings have been designed to meet the standards of the
American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel
Code, Section X. At an additional cost, vessels can be inspected during
fabrication by an ASME Authorized Inspector and Code
stamped.
|
|
600 PSI |
|
3-11 |
|
|
20ºF |
- Cleaning pH Range (<30 min.)
|
2-12 |
|
|
120º |
|
Typ. Brackish
Waters |
|
|
900 PSI |
|
≤
10,000 ppm Max. |
|
|
3600 PSI |
|
|
|
*Please
advise while ordering membrane pressure vessel if continuous
operating temperature is less than 45ºF. |
|
