PROTEC™ 8" Diameter Side Port Fiberglass (FRP) Pressure Vessel Membrane Housings
PROTEC™ pressure vessels are constructed of corrosion resistant filament wound fiberglass reinforced epoxy tubing and are designed for continuous use as housing for membrane filtration elements to purify typical brackish waters (150 -600 PSI) and seawater (1000 & 1200 PSI).
This style of fiberglass membrane housing is designed for direct connection to FilmTec/DOW style elements and is supplied with the element interface hardware for this style.
Side ported vessels with feed and concentrate connections located in the side wall of the vessel shell. 8" Side-Ported Vessels are available to house from one to eight 40" elements as well as one to five 60" elements. Available operating pressures are 150, 300, 450, 600, 1000 and 1200 PSI. To view details of the products, please see the product listings below.
PROTEC Pressure Vessel membrane housings have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.
Materials
Shell: Filament Would, Epoxy FRP
End Plugs/Sealing Plates: PVC Thermoplastic
Retaining Rings: Stainless Steel
Hardware Components
Pressure vessels include shell, end enclosure hardware and seals. Mounting straps and components are sold separately.
Click the pressure rating you wish to view, or just scroll down. [150 PSI] [300 PSI] [450 PSI] [600 PSI] [1000 PSI] [1200 PSI]
| Protec Vessel Model # |
Old AMI Model No. |
# of 8"x40" membrane elements per housing |
Design Pressure |
Vessel Length |
Specification Sheets and Engineering Drawings |
| Inches |
MM |
| PRO-8-150-SP-1 |
PV8040PRO150SP |
1 |
150 psi |
58.4" |
1483 |
|
| PRO-8-150-SP-2 |
PV8080PRO150SP |
2 |
150 psi |
98.4" |
2499 |
| PRO-8-150-SP-3 |
PV80120PRO150SP |
3 |
150 psi |
138.4" |
3515 |
| PRO-8-150-SP-4 |
PV80160PRO150SP |
4 |
150 psi |
178.4" |
4531 |
| PRO-8-150-SP-5 |
PV80200PRO150SP |
5 |
150 psi |
218.4" |
5547 |
| PRO-8-150-SP-6 |
PV80240PRO150SP |
6 |
150 psi |
258.4" |
6563 |
Specifications
- Design Pressure: 150 PSI
- Minimum Operating Temperature: 20°F
- Maximum Operating Temperature: 120°F
- Factory Test Pressure: 225 PSI
- Burst Pressure: 900 PSI
- Feed TDS: 10,000 ppm Max
- Operating pH Range: 3-11
- Cleaning pH Range (Less than 30 minutes): 2-12
- Application: Typical Brackish Water
*Please advise while ordering if continuous operating temperature is less than 45ºF. |
|
|
Spare Parts
| Model Number |
Description |
Qty Per Vessel |
Material |
| 4080008 |
Bearing Plate, Each |
2 |
6061-T6 Aluminum, SB-221, Anodized |
| 4080177-2 |
Sealing Plate, Each |
2 |
Thermoplastic |
| 4080250 |
Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316L, SA-312 |
| 6121187 |
Retaining Ring for Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316 Series |
| 6184604-N |
O-Ring for Feed/Concentrate Port, Each |
2 |
Ethylene Propylene |
| 4080309 |
Permeate Port, Each |
2 |
Noryl GFN2 |
| 6100442MK |
Head Seal, Each |
2 |
Ethylene Propylene |
| 6110229-N |
Permeate Port Seal, Each |
2 |
Ethylene Propylene |
| 4080080 |
Retaining Ring with Finger Pull, Each |
2 |
Stainless Steel, 300 Series |
| 6121200 |
Retaining Ring for Permeate Port, Each |
2 |
Stainless Steel, 300 Series |
| 4080165-1 |
Thrust Cone, Each |
1 |
PVC Thermoplastic |
|
| Protec Vessel Model # |
Old AMI Model No. |
# of 8"x40" membrane elements per housing |
Design Pressure |
Vessel Length |
Specification Sheets and Engineering Drawings |
| Inches |
MM |
| PRO-8-300-SP-1 |
PV8040PRO300SP |
1 |
300 PSI |
58.4" |
1483 |
|
| PRO-8-300-SP-2 |
PV8080PRO300SP |
2 |
300 PSI |
98.4" |
2499 |
| PRO-8-300-SP-3 |
PV80120PRO300SP |
3 |
300 PSI |
138.4" |
3515 |
| PRO-8-300-SP-4 |
PV80160PRO300SP |
4 |
300 PSI |
178.4" |
4531 |
| PRO-8-300-SP-5 |
PV80200PRO300SP |
5 |
300 PSI |
218.4" |
5547 |
| PRO-8-300-SP-6 |
PV80240PRO300SP |
6 |
300 PSI |
258.4" |
6563 |
Specifications
- Design Pressure: 300 PSI
- Minimum Operating Temperature: 20°F
- Maximum Operating Temperature: 120°F
- Factory Test Pressure: 450 PSI
- Burst Pressure: 1800 PSI
- Feed TDS: 10,000 ppm Max
- Operating pH Range: 3-11
- Cleaning pH Range (Less than 30 minutes): 2-12
- Application: Typical Brackish Water
*Please advise while ordering if continuous operating temperature is less than 45ºF. |
|
|
Spare Parts
| Model Number |
Description |
Qty Per Vessel |
Material |
| 4080028 |
Bearing Plate, Each |
2 |
6061-T6 Aluminum, SB-221, Anodized |
| 4080177-2 |
Sealing Plate, Each |
2 |
Thermoplastic |
| 4080250 |
Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316L, SA-312 |
| 6121187 |
Retaining Ring for Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316 Series |
| 6110225-N |
Seal for Feed/Concentrate Port, Each |
2 |
Ethylene Propylene |
| 4080309 |
Permeate Port, Each |
2 |
Noryl GFN2 |
| 6100442MK |
Head Seal, Each |
2 |
Ethylene Propylene |
| 6110229-N |
Permeate Port Seal, Each |
2 |
Ethylene Propylene |
| 4080320 |
Retaining Ring with Finger Pull, Each |
2 |
Stainless Steel, 300 Series |
| 6121200 |
Retaining Ring for Permeate Port, Each |
2 |
Stainless Steel, 300 Series |
| 4080165-1 |
Thrust Cone, Each |
1 |
PVC Thermoplastic |
|
| Protec Vessel Model # |
Old AMI Model No. |
# of 8"x40" membrane elements per housing |
Design Pressure |
Vessel Length |
Specification Sheets and Engineering Drawings |
|
| Inches |
MM |
| PRO-8-450-SP-1 |
PV8040PRO450SP |
1 |
450 PSI |
58.7" |
1491 |
|
|
| PRO-8-450-SP-2 |
PV8080PRO450SP |
2 |
450 PSI |
98.7" |
2507 |
| PRO-8-450-SP-3 |
PV80120PRO450SP |
3 |
450 PSI |
138.7" |
3523 |
| PRO-8-450-SP-4 |
PV80160PRO450SP |
4 |
450 PSI |
178.7" |
4539 |
| PRO-8-450-SP-5 |
PV80200PRO450SP |
5 |
450 PSI |
218.7" |
5555 |
| PRO-8-450-SP-6 |
PV80240PRO450SP |
6 |
450 PSI |
258.7" |
6571 |
Specifications
- Design Pressure: 450 PSI
- Minimum Operating Temperature: 20°F
- Maximum Operating Temperature: 120°F
- Factory Test Pressure: 675 PSI
- Burst Pressure: 2700 PSI
- Feed TDS: 10,000 ppm Max
- Operating pH Range: 3-11
- Cleaning pH Range (Less than 30 minutes): 2-12
- Application: Typical Brackish Water
*Please advise while ordering if continuous operating temperature is less than 45ºF. |
|
|
Spare Parts
| Model Number |
Description |
Qty Per Vessel |
Material |
| 4080030 |
Bearing Plate, Each |
2 |
6061-T6 Aluminum, SB-221, Anodized |
| 4080177-2 |
Sealing Plate, Each |
2 |
Thermoplastic |
| 4080250 |
Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316L, SA-312 |
| 6121187 |
Retaining Ring for Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316 Series |
| 6110225-N |
Seal for Feed/Concentrate Port, Each |
2 |
Ethylene Propylene |
| 4080309 |
Permeate Port, Each |
2 |
Noryl GFN2 |
| 6100442MK |
Head Seal, Each |
2 |
Ethylene Propylene |
| 6110229-N |
Permeate Port Seal, Each |
2 |
Ethylene Propylene |
| 4080320 |
Retaining Ring with Finger Pull, Each |
2 |
Stainless Steel, 300 Series |
| 6121200 |
Retaining Ring for Permeate Port, Each |
2 |
Stainless Steel, 300 Series |
| 4080165-1 |
Thrust Cone, Each |
1 |
PVC Thermoplastic |
|
| Protec Vessel Model # |
Old AMI Model No. |
# of 8"x40" membrane elements per housing |
Design Pressure |
Vessel Length |
Specification Sheets and Engineering Drawings |
|
| Inches |
MM |
| PRO-8-600-SP-1 |
PV8040PRO600SP |
1 |
600 PSI |
59" |
1499 |
|
|
| PRO-8-600-SP-2 |
PV8080PRO600SP |
2 |
600 PSI |
99" |
2515 |
| PRO-8-600-SP-3 |
PV80120PRO600SP |
3 |
600 PSI |
139" |
3531 |
| PRO-8-600-SP-4 |
PV80160PRO600SP |
4 |
600 PSI |
179" |
4547 |
| PRO-8-600-SP-5 |
PV80200PRO600SP |
5 |
600 PSI |
219" |
5563 |
| PRO-8-600-SP-6 |
PV80240PRO600SP |
6 |
600 PSI |
259" |
6579 |
Specifications
- Design Pressure: 600 PSI
- Minimum Operating Temperature: 20°F
- Maximum Operating Temperature: 120°F
- Factory Test Pressure: 900 PSI
- Burst Pressure: 3600 PSI
- Feed TDS: 10,000 ppm Max
- Operating pH Range: 3-11
- Cleaning pH Range (Less than 30 minutes): 2-12
- Application: Typical Brackish Water
*Please advise while ordering if continuous operating temperature is less than 45ºF. |
|
|
Spare Parts
| Model Number |
Description |
Qty Per Vessel |
Material |
| 4080032 |
Bearing Plate, Each |
2 |
6061-T6 Aluminum, SB-221, Anodized |
| 4080177-2 |
Sealing Plate, Each |
2 |
Thermoplastic |
| 4080257-1 |
Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316L, SA-312 |
| 6121187 |
Retaining Ring for Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316 Series |
| 6110225-N |
Seal for Feed/Concentrate Port, Each |
2 |
Ethylene Propylene |
| 4080309 |
Permeate Port, Each |
2 |
Noryl GFN2 |
| 6100442MK |
Head Seal, Each |
2 |
Ethylene Propylene |
| 6110229-N |
Permeate Port Seal, Each |
2 |
Ethylene Propylene |
| 4080320 |
Retaining Ring with Finger Pull, Each |
2 |
Stainless Steel, 300 Series |
| 6121200 |
Retaining Ring for Permeate Port, Each |
2 |
Stainless Steel, 300 Series |
| 4080165-1 |
Thrust Cone, Each |
1 |
PVC Thermoplastic |
|
| Protec Vessel Model # |
Old AMI Model No. |
# of 8"x40" membrane elements per housing |
Design Pressure |
Vessel Length |
Specification Sheets and Engineering Drawings |
| Inches |
MM |
| PRO-8-1000-SP-1 |
PV8040PRO1000SP |
1 |
1000 PSI |
61.6 |
1565 |
|
| PRO-8-1000-SP-2 |
PV8080PRO1000SP |
2 |
1000 PSI |
101.6 |
2581 |
| PRO-8-1000-SP-3 |
PV80120PRO1000SP |
3 |
1000 PSI |
141.6 |
3597 |
| PRO-8-1000-SP-4 |
PV80160PRO1000SP |
4 |
1000 PSI |
181.6 |
4613 |
| PRO-8-1000-SP-5 |
PV80200PRO1000SP |
5 |
1000 PSI |
221.6 |
5629 |
| PRO-8-1000-SP-6 |
PV80240PRO1000SP |
6 |
1000 PSI |
261.6 |
6645 |
Specifications
- Design Pressure: 1000 PSI
- Minimum Operating Temperature: 20°F
- Maximum Operating Temperature: 120°F
- Factory Test Pressure: 1500 PSI
- Burst Pressure: 6000 PSI
- Feed TDS: 45,000 ppm Max
- Operating pH Range: 3-11
- Cleaning pH Range (Less than 30 minutes): 2-12
- Application: Typical Seawater
*Please advise while ordering if continuous operating temperature is less than 45ºF. |
|
|
Spare Parts
| Model Number |
Description |
Qty Per Vessel |
Material |
| 4080034 |
Bearing Plate, Each |
2 |
6061-T6 Aluminum, SB-221, Anodized |
| 4080177-2 |
Sealing Plate, Each |
2 |
Thermoplastic |
| 4080234 |
Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316L, SA-312 |
| 6121187 |
Retaining Ring for Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316 Series |
| 6110225-N |
Seal for Feed/Concentrate Port, Each |
2 |
Ethylene Propylene |
| 4080308 |
Permeate Port, Each |
2 |
Noryl GFN2 |
| 6100442MK |
Head Seal, Each |
2 |
Ethylene Propylene |
| 6110229-N |
Permeate Port Seal, Each |
2 |
Ethylene Propylene |
| 4080320 |
Retaining Ring with Finger Pull, Each |
2 |
Stainless Steel, 300 Series |
| 6121200 |
Retaining Ring for Permeate Port, Each |
2 |
Stainless Steel, 300 Series |
| 4080165-1 |
Thrust Cone, Each |
1 |
PVC Thermoplastic |
|
| Protec Vessel Model # |
Old AMI Model No. |
# of 8"x40" membrane elements per housing |
Design Pressure |
Vessel Length |
Specification Sheets and Engineering Drawings |
| Inches |
MM |
| PRO-8-1200-SP-1 |
PV8040PRO1200SP |
1 |
1200 PSI |
61.6 |
1565 |
|
| PRO-8-1200-SP-2 |
PV8080PRO1200SP |
2 |
1200 PSI |
101.6 |
2581 |
| PRO-8-1200-SP-3 |
PV80120PRO1200SP |
3 |
1200 PSI |
141.6 |
3597 |
| PRO-8-1200-SP-4 |
PV80160PRO1200SP |
4 |
1200 PSI |
181.6 |
4613 |
| PRO-8-1200-SP-5 |
PV80200PRO1200SP |
5 |
1200 PSI |
221.6 |
5629 |
| PRO-8-1200-SP-6 |
PV80240PRO1200SP |
6 |
1200 PSI |
261.6 |
6645 |
Specifications
- Design Pressure: 1200 PSI
- Minimum Operating Temperature: 20°F
- Maximum Operating Temperature: 120°F
- Factory Test Pressure: 1800 PSI
- Burst Pressure: 7200 PSI
- Feed TDS: 45,000 ppm Max
- Operating pH Range: 3-11
- Cleaning pH Range (Less than 30 minutes): 2-12
- Application: Typical Seawater
*Please advise while ordering if continuous operating temperature is less than 45ºF. |
|
|
Spare Parts
| Model Number |
Description |
Qty Per Vessel |
Material |
| 4080034 |
Bearing Plate, Each |
2 |
6061-T6 Aluminum, SB-221, Anodized |
| 4080177-2 |
Sealing Plate, Each |
2 |
Thermoplastic |
| 4080234 |
Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316L, SA-312 |
| 6121187 |
Retaining Ring for Feed/Concentrate Port, Each |
2 |
Stainless Steel, 316 Series |
| 6184604-N |
Seal for Feed/Concentrate Port, Each |
2 |
Ethylene Propylene |
| 4080308 |
Permeate Port, Each |
2 |
Noryl GFN2 |
| 6100442MK |
Head Seal, Each |
2 |
Ethylene Propylene |
| 6110229-N |
Permeate Port Seal, Each |
2 |
Ethylene Propylene |
| 4080320 |
Retaining Ring with Finger Pull, Each |
2 |
Stainless Steel, 300 Series |
| 6121200 |
Retaining Ring for Permeate Port, Each |
2 |
Stainless Steel, 300 Series |
| 4080165-1 |
Thrust Cone, Each |
1 |
PVC Thermoplastic |
|
|
