Clean Tap Monitor

HM Digital Clean Tap Monitor CT-1 has been discontinued by the manufacturer and is no longer available.
Click Here to view the replacement monitor: FM-1.

This specification is being maintained for cross-reference purposes only.

The clean tap monitor automatically monitors the quality of a filtration system directly from the base of any standard faucet.
The unit provides an indicator through three L.E.D. lights or beeper (optional)
Three-part monitor process:

1. Monitor Processor: By measuring the volume of water passing through the filtration system by the electric program, the Monitor Processor sends the signals to the L.E.D. lamps or the buzzer and indicates whether the filters are functioning normally, approaching capacity or past useful capacity.
2. Flow Switch: The Flow Switch senses the dispensed water and sends the signals to the Monitor Processor.
3. Monitor: One of the three-colored L.E.D. Lamps blinks for a 3-6 seconds every time water is dispensed. Green Light indicates the normal function of filters, Yellow Light, the readiness to change, and Red Light, the need of immediate change.
Green Light: Filter Usage = 0% - 80%
Yellow Light: Filter Use = 80% - 99%
Red Light: Filter Use = 100%

Model No.	Description
CT-1 No Longer Available. This specification is being maintained for cross-reference and existing product support only.	Clean Tap Monitor Max Filter Capacity: 4000 Liters Power Source: 2 × AA batteries Dimensions: 6 × 8.8 × 2.4 cm (2.4 × 3.5 × .9 in.) Processor Weight: 102 g (3.6 oz) Complete Weight: 161.6 g (5.7 oz)