|
| |
Sterilight Cobalt™ "Plus" (SCM) Ultraviolet (UV)
Disinfection Systems
| R-Can Sterilight “Cobalt
Plus” ultraviolet
disinfection systems are specifically designed for point-of-use applications
where microbiological control is required. R-Can “Cobalt” UV units control
bacteria, virus and protozoan cyst (specifically giardia lamblia and
cryptosporidium) all in one complete design. The new Cobalt™ "PLUS"
series Ultraviolet Systems with the new Cobalt Plus Controller in a
water-tight case, which features a 4-segment LED display showing: % UV
Intensity, Lamp Life Remaining with Total Operating Time, Audible Indicator,
Fused Solenoid Output (solenoid valve and cord sold separately), 4-20mA
output (optional), 304 axial flow SS chamber & Sterilume-HO High-Output
coated lamps.
Features & Specifications R-Can UV Systems;
-
99.99%
destruction of bacteria, virus & protozoan cysts (Giardia lamblia &
Cryptosporidium) at rated flow.
-
Integral UV intensity
monitor
-
Cobalt "PLUS" controller -
% UV Intensity, lamp life remaining, total operating time, solenoid
output, 4-20mA output (optional), and universal power input.
-
Sterilume™-HO high-output
coated UV lamps.
-
Compact design requiring
small installation footprint
-
304 Axial Flow stainless
steel reactors
|
|
Sterilight Cobalt Plus Ultraviolet
Water Disinfection Systems
|
Model # |
Flow Rate (GPM) |
Replacement UV Lamp |
Replacement Quartz Sleeve |
Replacement UV Controller |
Replacement UV Sensor |
Weight
lbs (kg) |
| SCM-200 |
8 |
S200RL-HO |
QS-200 |
BA-ICE-CM |
254NM-C1 |
12 (5.4) |
| SCM-320 |
13 |
S320RL-HO |
QS-320 |
BA-ICE-CM |
254NM-C1 |
15 (6.8) |
| SCM-600 |
32 |
S600RL-HO |
QS-600 |
BA-ICE-CM |
254NM-C1 |
19 (8.6) |
| SCM-740 |
40 |
S740RL-HO |
QS-740 |
BA-ICE-CM |
254NM-C1 |
24 (10.9) |
Note: System Models above are for 110v, USA.
- To order European Style, add "/2" to the end of the model number
(Example: SCM-200/2).
European systems are shipped with 2-prong continental European (cee-7/7), 2
pin with ground “schuko” power cord.
- To order Australian Style (as 3112) Powercord add "/2A" to the end of
the model number (Example: SCM-200/2A)
- To Order order with a UK (bs 1363) power cord – add "/2B" to the end of
the model number (Example: SCM-200/2B)
- To order bare leads – add "/2C" to the end of the model number (Example:
SCM-200/2C)
Note: As these systems incorporate Sterilume-HO "high output" UV lamps
providing more power and without the incorporation of Flow-Pace™ technology as
in the Platinum™ systems, it should be noted that one may experience high
ambient water temperatures in extended periods of no-flow. To solve this
issue, as separate temperature management valve is offered below.
|
Temperature Management Valve |
|
 |
| Model Number:
440179 Integral temperature management valve for use on
ultraviolet water systems incorporating Sterilume-HO, high-output UV
lamps such as the Cobalt or Platinum Series UV systems. This fully
automatic valve is installed on the outlet port of the UV disinfection
system and will discharge a small amount of water to drain when the
system reaches a preset temperature. This valve is perfect for
applications with extended no-flow conditions, as it allows the lamp to
operate within its optimal operating parameters. The valve
assembly comes complete with 12' of drain line, manufactured with 316L
stainless steel, and is available in 1"FNPT x 1"FNPT connections.
Weight: 2 lbs (0.9 kg) |
|