Residential Encapsulated Tap Water Thin Film RO Membranes

36-100 GPD models listed on this page use NSF certified membranes. M-T1812A36, M-T1812A50, M-T1812A75, M-T1812A100 are NSF Certified for material requirements only.†

AMI Reverse Osmosis Membranes encapsulated in a disposable housing.

Quick & Easy Membrane Replacement
Available in 36, 50, 75, 100 & 150 GPD Flows
1/4" Quick Connect Fittings with Color Coding
Available with a Check Valve and/or Flow Restrictor Pre-Installed*

Model	Permeate Flow Rate		Minimum Salt Rejection (%)**†	Stabilized Salt Rejection (%)**†	Specifications Sheets
Model	Gals/Day	Liters/Day	Minimum Salt Rejection (%)**†	Stabilized Salt Rejection (%)**†	Specifications Sheets
M-T1812EK36	36	136	96	98
M-T1812EK50	50	190	96	98
M-T1812EK150	150	568	96	98

*Add "-V" to the end of the part # for Check Valve ie: M-T1812EK36-V, Add "-F" for Flow Restrictor ie: M-T1812EK36-F, Add "-FV" for Flow Restrictor AND Check Valve M-T1812EK36-FV

**Salt Rejection shown is from internal test data.

Note: Performance specifications based on 500 ppm tap water, 50psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary ± 15%.

RECOMMENDED OPERATION CONDITIONS

Maximum operation pressure	125 psi (0.86 MPa)
Maximum feed flow rate	2 gpm
Maximum operating temperature	113° F (45° C)
Maximum feed water turbidity	1 NTU
Maximum feed water SDI (15min)	5
Chlorine tolerance	0
Feedwater pH range, Continuous Operation	2-11
Feedwater pH range, Short-Term Cleaning (30min)	1-12
Minimum brine flow to permeate flow ratio	4:1

Top of page

For prompt, courteous and reliable service, contact us today!