|
|
|
|
2325 Cousteau Ct., Vista, CA 92081-8346 • (760) 727-3711 • FAX (760)
727-4427 • http://www.appliedmembranes.com • sales@appliedmembranes.com |
New Product:
XL Series RO
Systems - Operate at 100 to 140 PSI
|
 |
System
Flows of 2,000 GPD - 10,000 GPD
System Features: |
- Stainless Steel
Multistage Pump
- Lower Operating
Pressure
- Low Energy (XLE)
Membranes
- 5 Micron Filter and
Housing
- Low Pressure Pump
Protection
- Product Flowmeter
- Concentrate
Flowmeter
- Tank Level Controls
(Floats Optional)
- Flow Control Valve
- Concentrate Recycle
Valve & Flow Meter
|
- 4 Pressure Gauges:
Concentrate Pressure Gauge, Filter-In, Filter-Out, Membrane Inlet
- Compact Heavy Duty
Powder Coated Frame
- Microprocessor
Controller with:
- Illuminated On/Off
Power Switch
- Pretreatment
Lock-Out and Indicator Light
- Tank Full
Indicator Light and Shut-Down (float switches for tank not included)
- Hour Meter
|
Click here to
visit our website and view details on this product line.
Check Our Overstock
Sale for Great Discounts!
FilmTec Membranes,
Hydranautics Membranes, Filters, Housings, Residential & Commercial Components
and more items are drastically reduced for immediate sale.
Click here
to check our entire list of overstock items.
Discount prices available only while
supplies last!
Sale Includes product brand names:
FilmTec, Hydranautics, Pentek/Ametek, KX Matrikx, Omnipure, Harmsco, Plymouth,
John Guest, Jaco, Sterilight and more!
Click here to
check our entire list of overstock items.
New Product:
150 GPD Residential RO Membranes
150 Gallon Per Day
Membranes are now available in residential sizes. Designed to
perform in operating conditions similar to most standard under-the-counter
home RO units, the
M-T1812A150 forms a tight fit in most standard residential housings.
M-T1812A150 performance
data*:
150 Gallons Per Day @ 65 PSI
98% Stabilized Salt Rejection
*Note: Performance specifications based on 500 ppm tap water, 65 psi (0.45
MPa) applied pressure, 77°F (25°C)
feed water temperature, feed water pH 7-8 and 15% recovery. Element
permeate flow may vary ± 20%.
|
Dimensions
Overall Length
(A): 11.75 In. (29.8 cm)
Membrane Length (B): 10 In. (25.4 cm)
Diameter (C): 1.95 In. (5.0 cm) |
Click Here for Complete
Product Details
New Product:
Compact SDI
Kit (SDI-2000)
Completely assembled
in a portable, COMPACT case, ready for on-site testing. Includes
instructions for measuring silt density index. Feed pressure required: Min
40 psi
Assembled with:
|
 |
- Filter Holder
- Pressure Gauge
- Pressure Regulator
- Ball Valve
- Graduated Cylinder
- Thermometer
- Tubing
- Filter Tweezers
(Filters not included)
|
 |
Click Here for Complete
Product Details
Reverse Osmosis
Seminar
Design, Operation and
Maintenance of Reverse Osmosis Systems
To be held at: Lake San Marcos Resort, San Marcos, California
Given By: Dr. Gil Dhawan
Date: October 19th-20th, 2006
Click Here for Seminar Details
Technical Note By Dr. Dhawan:
What is Nanofiltration?
Nanofiltration, in
concept and operation, is much the same as reverse osmosis. The key
difference is the degree of removal of monovalent ions such as chlorides.
Reverse osmosis removes the monovalent ions at 98-99% level at 200 psi.
Nanofiltration membranes’ removal of monovalent ions varies between 50% to
90% depending on the material and manufacture of the membrane. For this
reason, there is a variety of Nanofiltration membranes available. Each type
is particularly suited to a certain application and may not be acceptable to
a different application.
Nanofiltration membranes
and systems are used for water softening, food and pharmaceutical
applications. For specifications and other information on specific
nanofiltration membrane products, visit
http://www.appliedmembranes.com/mem.html
Design Tip:
Like RO Membranes,
Nanofiltration Membranes require pretreatment to protect against scaling and
fouling.
