Flojet Dispensing Pumps

Flojet Water Dispensing Pumps

Flojet Bottled Water Dispensing System

Model No.

Description

Image

BW1000A

Bottled water dispensing system. Voltage: 115 VAC
Standard Models include 20 ft. (6.1m) of 1/4 in. (0.6 cm) tube;3.5 ft. (1 m) cord with plug

BW2000A

Bottled water dispensing system. Voltage: 230 VAC
Standard Models include 20 ft. (6.1m) of 1/4 in. (0.6 cm) tube;3.5 ft. (1 M) cord stripped

Float switch for automatic shut-off when bottle is empty
Built-in check valve to prevent back flow
Universal seal cap fits most water containers
Compact size for easy mounting
20 in. (6.1 m) discharge hose included
Easy installation
For use with a 5 gallon water bottle (smaller bottles not recommended).

Specifications:
Max. Flow Rate	1.0 gpm 3.8 lpm
Max. Pressure	40 psi 2.8 bar
Dimensions	3.0 H x 5.5 W x 7.5 D inches 7.6 x 14.0 x 19.0 cms
Voltage	115 or 230 VAC 12 Vdc
Amp Draw	12 Volt 3.0 Amps. Max. 115 Volt 0.5 Amps. Max. 230 Volt 0.25 Amps. Max.
Cycles	AC models 50/60 Hz
Weight	6.4 lb 2.9 kg
Operating Manual	Click to download product operating manual.

Flojet Pressure Controlled Delivery Pumps

Self-priming diaphragm pump with 110-240v AC electric motors. Flow rates up to 17 litres/min (4.5 US gallons/min), pressure switch control, capable of pressures up to 3.2bar (45psi)

Self-primes up to 2.4m vertical lift
Handles Water-Like and Viscous Liquids up to 250 cP
Four-piston design delivers higher flow rates
Chemical-resistant polypropylene pump head for Iong life
Choice of elastomeric materials to work with many chemicals
Quick-connect plug-in ports for easy installation
Optional pressure-switch control to run the pump only as needed

Model No.	Description	Image
4300-043A	Pump, 5 GPM at 40 PSI MPU S/E 3C SW 45 Model TEFC fan cooled motor base plate w/ rubber ft. (standard) 115V, 15 AMP with pressure switch at 45 PSI cut out /30 PSI cut in. 9.06" long by 3.75" wide. 3/4" hose barb connections wire leads (only)
4325-043A	Pump, 5 GPM at 40 PSI, MPU S/E 3C SW 40 w/ DW, TEFC motor O-Ring sealed, non-fan cooled motor, rubber feet only (no base plate), 115V, 1.5 AMP with pressure switch at 45 PSI cut out /30 PSI cut in , 9.9" Long by 3.75" wide, 3/4" hose barb connections, 6' long power cord.
4100-500A	- 3.5 GPM @ 45 PSI - 115v - No Pressure Switch - ½” Hose Barb Connections

Specifications:
Voltage	115 & 230, 50 or 60Hz VAC
Flow Rate	up to 5 US Gallons/Min (18.9 Litres/min)
Max. Pressure	up to 45psi (3.2bar)
Elastomers	EPDM, Santoprene, Nitrile or Viton

Top of page

For prompt, courteous and reliable service, contact us today!