KX Filters - MATRIKX Extruded Activated Carbon Block Filters

Please select a filter type below to skip to that section, or scroll down to browse.

KX Filters - MATRIKX + 10/2:  3 Micron Extruded Activated Carbon Block Filter

• 3 µm Nominal Filtration

• >99.5% Reduction of 10 µm Particles

• Enhanced Dirt Holding Capacity

• No Release of Carbon Fines

• Significantly Exceeds Performance of Traditional GAC and PAC Filters

• Performance Tested and Verified by Independent Laboratory Testing

KX MATRIKX® + 10/2 is the perfect choice for point-of-use (POU) and reverse osmosis systems.  Because of its extremely low cost, the MATRIKX +10/2 filter is also the ideal replacement wherever GAC (granular activated carbon) or PAC (powdered activated carbon) filters are used.

[MATRIKX +10/2] [MATRIKX +CTO/2] [MATRIKX +5] [MATRIKX +1]

KX Filters - MATRIKX +CTO/2:  5 Micron Extruded Activated Carbon Block Filter

"The Workhorse"

• 5µm Nominal Filtration

• High Adsorptive Capacity and Efficiency

• Efficient Sediment Filter

• No Release of Carbon Fines

• Performance Tested and Verified by Independent Laboratory Testing

KX MATRIKX CTO/2 filters are the most widely used carbon block devices in the world and provide previously unattainable performance at the lowest price point.  MATRIKX +CTO/2 filters simultaneously remove chlorine taste and odor and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity of an efficient 5 µm nominal sediment filter.  These filters are optimized for applications where they perform the role of both a sediment and activated carbon filter.

The extrusion process allows the production of a carbon block with more carbon, but a lower pressure drop.  This enables a MATRIKX + CTO/2 filter to deliver extended life while removing sediment, chlorine taste and odor and organic contaminants from water, aqueous solutions or suspensions.  The MATRIKX +CTO/2 is also widely used in filtering organic solvents.  The MATRIKX +CTO/2 is ideal for use in residential and commercial water purification systems, food service, pre- and post-RO systems.

MATRIKX + CTO/2 or GAC?

The MATRIKX +CTO/2 is manufactured from high purity acid-washed activated carbon.  Its dirt-holding capacity and the absence of carbon fines make the MATRIKX + CTO/2 the filter of choice.  A Superior carbon block, MATRIKX +CTO/2 combines both high performance and integrity with an exceptional cost-to-performance value.  As a result, MATRIKX + CTO/2 virtually renders GAC filters obsolete by comparison.

[MATRIKX +10/2] [MATRIKX +CTO/2] [MATRIKX +5] [MATRIKX +1]

KX Filters - MATRIKX + 5:  2 Micron Extruded Activated Carbon Block Filter

• 2 µm Nominal Filtration

• High Chemical Adsorptive Capacity

• High VOC and TOC Reduction

• High Turbidity Reduction

• Performance Tested and Verified by Independent Laboratory Testing

KX MATRIKX® +5 filter is made from coconut shell carbon, which creates what many believe to be a sweeter tasting water.  Because of the unique pore structure of this carbon, it is well-suited for chemical adsorption, including VOCs, and chlorine taste and odor.  KX MATRIKX + 5 filters provide 2 µm nominal particulate filtration and extended life as a fine sediment filter.

The service life of a KX MATRIKX + 5 filter is greatly extended by an outer layer of prefiltration medium and will operate effectively in most installations without prefiltration.  The KX MATRIKX +5 is ideal for residential and food service applications where improving the taste of water is the primary objective.

[MATRIKX +10/2] [MATRIKX +CTO/2] [MATRIKX +5] [MATRIKX +1]

KX Filters - MATRIKX +1:  0.6 Micron Filtration Rating Extruded Activated Carbon Block Filter

KX Industries MATRIKX® +1 Extruded Activated Carbon Block Filter:
"The Chlorine Taste and Odor Guzzler"

• 0.6 µm Nominal Filtration

• High Chemical Adsorptive Capacity

• High VOC Reduction

• Performance Tested and Verified by Independent Laboratory Testing

KX MATRIKX +1 provides comprehensive control of chlorine, taste and odor.  KX MATRIKX +1 filter offers:  0.6 µm nominal filtration with extended life as a fine sediment and silt control filter, comprehensive removal of chlorine taste and odor and chemicals that contribute to taste and odor, and high VOC reduction capacity.  The service life of KX MATRIKX +1 filters is greatly extended by a prefiltration medium.  The KX MATRIKX +1 is ideal for use in residential and commercial water purification systems, industrial effluent water treatment, food service, industrial makeup, product rinse, process water, and pre- and post-RO systems which require nearly absolute chlorine, taste and odor reduction.

[MATRIKX +10/2] [MATRIKX +CTO/2] [MATRIKX +5] [MATRIKX +1]

Copyright © 2008 Applied Membranes, Inc. All Rights Reserved.