Filter-Ag Sediment Filters

Filter-Ag Filters for Sediment Removal

About Filter-Ag Filtration:
Filter-Ag is a non-hydrous silicon dioxide media which can be used as a highly efficient filter media for the reduction of suspended matter.

Benefits of Using a Filter-Ag Filter:

Less pressure loss
Lower backwash rates
High service rates result in lower equipment costs and a savings in space
High sediment reduction capacity results in longer filter runs, with a substantial savings in backwash water and time out of service
Light weight reduces shipping costs

Conditions for Operation for Filter-Ag Sediment Filters:

Water pH range: wide range
Maximum water temperature: 140°F/60°C
Upon installation, allow bed to soak overnight before backwashing.

Filter-Ag Filters

Filter Model No.*	Media (Cu.Ft.)		Flow Rate** (GPM)		Backwash Flow** (GPM)	Fleck Valve Head	Tank Size (Dia”×H”)	In/Out Conn. (in.)	Approx Ship Wt (lbs)
Filter Model No.*	Filter-Ag (Only)	Total (Incl. Underbedding)	5gpm/ft.2	15gpm/ft.2	Backwash Flow** (GPM)	Fleck Valve Head	Tank Size (Dia”×H”)	In/Out Conn. (in.)	Approx Ship Wt (lbs)
W-MA744	0.50	0.60	1	4	2	5600	7 × 44	¾	60
W-MA844	0.60	0.70	2	5	3	5600	8 × 44	¾	65
W-MA940	0.75	0.85	2	6	3.5	5600	9 × 40	¾	70
W-MA1054	1.25	1.45	2	7	4	5600	10 × 54	¾	80
W-MA1252	1.75	2.05	4	12	7	5600	12 × 52	¾	105
W-MA1354	2.00	2.30	4	14	7	5600	13 × 54	¾	125
W-MA1465	2.50	3.00	5	16	7	5600	14 × 65	¾	175
W-MA1665	3.50	4.00	7	21	17	2510	16 × 65	1	225
W-MA2162	6.00	7.00	13	36	25	2850	21 × 62	1.5	315
W-MA2472	8.00	10.0	15	47	49	2850	24 × 72	1.5	385
W-MA3072	12.5	16.5	24	74	50	3150	30 × 72	2	455
W-MA3672	17.0	22.0	35	106	75	3150	36 × 72	2	735
W-MA4272	23.0	30.0	48	144	100	3900	42 × 72	3	885
W-MA4872	30.0	43.6	60	188	100	3900	48 × 72	3	1,435

* Please add the appropriate voltage code to the end of the model no. when ordering.
110v/60Hz = 116, 220v/60Hz = 216, 220v/50Hz = 215 Example: W-MA744-116

** 5 gpm per sq. ft. of media is the best design condition for filtration. For relatively clean water, you may go up to design criteria of 15 gpm per sq. ft. Backwash flow rate based on 25 psi pressure drop.

*** Stainless Steel Jacket available for 9-16” Diameter.

Specifications 100 lb. FRP Vessel All Systems Automatic Fleck or Equal Control Valve	With SS Jacket (available upon request)	With No Jacket

Top of page

For prompt, courteous and reliable service, contact us today!