Series J Systems

Complete Reverse Osmosis RO Systems
Series J - 11,500 - 28,800 Gallons per Day

Designed to produce low dissolved solids water from tap or well water, these commercial RO systems use highly efficient Reverse Osmosis Membranes. The RO product water is used in applications such as rinse water, pharmaceutical, food processing, bottled water, hotels, beverage, hospitals, and a wide variety of other applications for water purification.

Series J Reverse Osmosis Water Filtration Systems use 4”×40” RO membrane elements. Membrane Housing pressure vessels contain one or two RO membrane elements each and are mounted in a horizontal position.

Key Features:

Over 25 years of experience is reflected in our quality
Heavy duty powder coated frame
SS High pressure components, SS Pump
Microprocessor Controlled Operation
Conservatively engineered for reliable long term performance
Factory tested to ensure trouble-free opera

STANDARD EQUIPMENT- Series J RO Systems
Thin Film Composite Membranes Stainless steel multi-stage centrifugal pump Stainless steel membrane pressure vessels Powder coated carbon steel skid Sediment filter with 5 micron filters 304SS high pressure piping and Sch. 80 PVC low pressure piping Motorized automatic inlet feed valve Feed pump throttling valve, SS	Concentrate & recycle panel mounted flow control valves, SS Automatic membrane feed flush Low inlet pressure switch High pressure switch 4) Panel mounted liquid filled pressure gauges: Filter in/out, pump, concentrate 3) Panel mounted flowmeters: Product, reject and recycle Product TDS (or Conductivity) with digital display readout Cleaning ports

Microprocessor Controller for Automatic Operation

Monitors and/or Controls:

Inlet valve
Delayed start-up of high pressure pump
Feed water flush at system shut-down
Low pressure and high pressure switches
On/Off with storage tank level
Pre-treatment backwash/lockout
Permeate TDS (or conductivity)
Feed TDS (or conductivity) and percent rejection
Water Temperature
Operating hours
RO tank full override
Auxiliary pump or valve control (optional)

RO System Controller
Controller Model S150

Features:

Backlit LED Display
Multi-function keypad
Visual and audible alarm & silence key
Programmable time delays, set-points and flush mode
Visual indicator alarm light
Low pressure automatic restart

LED Display:

Permeate Quality (TDS)
Operating Status
Alarm Condition

OPTIONAL EQUIPMENT- Series J RO Systems

Stainless steel Boost or repressurization pump
pH monitor for feed or for permeate
Chemical injection
*Pre-treatment: Softener, carbon, media
Clean-in-place doubles as a permeate flush system
ORP monitor/controller
Filter housing upgrade to SS
2nd filter housing
Turbidity monitor

Permeate divert to drain
UV system, feed or permeate
FRP membrane housings
Low energy membranes
*Float Tree for Storage Tank
Pressurized storage tank controls
PLC Control – with optional touch screen

*Recommended Minimum Options

Series J Reverse Osmosis System Specifications

Model	Capacity			Number of elements*	Line sizes (inches)			System Dimensions						Approx. Weight
	GPM	GPD	m3/hr		Inlet	Permeate	Concentrate	Length		Width		Height		Approx. Weight
								Length		Width		Height		lb	kg
								in.	cm.	in.	cm.	in.	cm.	lb	kg
J-44A	5	7,000	1.1	4	1	3/4	3/4	80	203	35	89	74	188	1,070	485
J-54A	6	8,500	1.3	5	1	3/4	3/4	80	203	35	89	74	188	1,130	513
J-64A	7	10,000	1.6	6	1	3/4	3/4	80	203	35	89	74	188	1,190	540
J-74A	8	11,500	1.8	7	1	3/4	3/4	54	137	30	76	72	183	1,275	578
J-84B	9	13,000	2.0	8	1	3/4	3/4	100	254	35	89	72	183	1,410	640
J-104B	10	14,400	2.3	10	1	3/4	3/4	100	254	35	89	72	183	1,530	694
J-124B	12	17,300	2.7	12	1 1/2	1	3/4	100	254	35	89	72	183	1,610	776
J-144B	14	20,000	3.2	14	1 1/2	1	3/4	100	254	35	89	72	183	1,830	830
J-164B	16	23,000	3.6	16	1 1/2	1	3/4	100	254	35	89	72	183	1,950	885
J-184C	18	26,000	4.1	18	1 1/2	1 1/2	3/4	100	254	35	89	72	183	2,070	939
J-204C	20	28,800	4.5	20	1 1/2	1 1/2	3/4	100	254	35	89	72	183	2,190	993

* Elements are 40" (102 cm) in length × 4" (10 cm) in diameter

NOTES - Series J Reverse Osmosis Systems

All dimensions and weights are approximate. Capacity Basis: 24 hrs/day. Systems rated at: 77°F (25°C) using 2000 ppm sodium chloride solution operating at approx. 225-250 psi pressure. Minimum feed pressure to RO System: 40-60 PSI. System capacity changes significantly with water temperature. For higher TDS a water analysis must be supplied and could result in modifications to the system. Chlorine must be removed if present in feed water prior to RO with a carbon filter or with chemical injection. Pretreatment for water hardness using a softener or antiscalant injection should be added to avoid scaling the membranes. Feed water turbidity: Less than 1 NTU ; Feed water silt density index (SDI): 3 maximum. If exceeded, pretreatment with media filter recommended. All pretreatment equipment and SDI test kits are available from Applied Membranes.

ORDERING INFORMATION- Series J RO Systems

Please add our voltage codes to the end of the model number when ordering. Example: J-84B-236 = 220/230v / 3 ph / 60 hz

voltage codes:

236 = 220 or 230v/ 3ph/ 60 hz
436 = 460 or 480v/ 3ph/ 60 hz

235 = 220v/3ph/50hz
335 = 380v/3ph/50 hz

No Single Phase Available

Replacement Parts & Consumables for Series J Reverse Osmosis Systems
Click here for replacement Membranes Click here for replacement Membrane Pressure Vessels Click here for replacement Sediment Filters Click here for replacement Carbon Filters	Click here for replacement Filter Housings Click here for replacement Components Click here for Membrane Cleaning Cartridges

Top of page

For prompt, courteous and reliable service, contact us today!