Complete Reverse Osmosis RO Systems

Designed to produce low dissolved solids water from tap or well water, these RO systems use high efficiency reverse osmosis membranes for water purification. The product water is used in applications such as spot free rinse, water stores, whole house, labs, ice makers, humidification, misting and a wide variety of other applications.

Series L RO Systems use 2.5” or 4” Diameter, 40” long membrane elements. Pressure vessels containing membrane elements are mounted in a vertical position. For ease of operation and maintenance, the Series L is designed to accommodate panel mounted controls and instrumentation.

Picture shows system with optional equipment.

Key Features:

• Over 20 years of experience is reflected in our quality
• Compact, Heavy Duty, Powder Coated Frame
• Proven components used throughout the system
• Conservatively engineered for reliable long term performance
• Factory tested to ensure trouble-free operation

• Thin Film Composite Membranes

• Stainless Steel Pressure Vessels

• 5 Micron 20” Filter and Housing

• Low Pressure Pump Protection

• Product Flowmeter

• Concentrate Flowmeter

• Tank Level Controls (Floats Optional)

• High Pressure RO Pump

• Flow Control Valve

• Concentrate Recycle Valve & Flow Meter

• 3 Pressure Gauges: System Pressure Gauge, Filter-In, Filter-Out

• Heavy Duty Powder Coated Frame

• ROC-50 Microprocessor Controller with:

  • Illuminated On/Off Power Switch

  • Pretreatment Lock-Out and Indicator Light

  • Tank Full Indicator Light and Shut-Down (float switches for tank not included)

  • Hour Meter
     

• Float Tree for Atmospheric Storage Tank

• Second 5 Micron 20” Filter and Housing

• Fiberglass Pressure Vessels

• Stainless Steel Pump

• Temperature Gauge

• Permeate Quality (TDS) Digital Monitor
   

• Upgraded microprocessor controller, ROC 150D

• Pre-treatment Equipment*
  Carbon System, Water Softener, Media Filter, Chemical Dosing

• Crating*
   

• All dimensions and weights are approximate.

• Systems rated at 77°F (25°C) using 1000 ppm sodium chloride solution and 200 psi (14 kg/cm²) pressure. System capacity changes significantly with water temperature. For higher TDS a water analysis must be supplied and could result in modifications to the system.

• Chlorine must be removed prior to RO system if present in the feed water.

• Water must be pretreated using a water softener or antiscalant to avoid scaling the membranes.
   

Please add our voltage codes to the end of the model number when ordering.   Example:  L-14A-216 = 220v/1ph/60Hz
Voltage Codes:  216 = 220v/1ph/60hz        116 = 110v/1ph/60hz        215 = 220v/1ph/50Hz