Single Water Softeners with Metered Valves
Metered Water Softeners are prompted to regenerate based on the amount of water that has passed through the unit. Like the timered softeners, these can be programmed to regenerate at a certain time of day. Instead of regenerating on a specific day as a timered softener does, the metered softener does not schedule a regeneration until the specified amount of water have passed through the softener. These units can save water by preventing unnecessary regenerations since it does not regenerate until the resin is near its capacity.
Please Select a Product Below
AMI Water Softeners Product Specifications
| Water Softener Model No. | Volume of Media (Cu. Ft.) |
Flow Rate (GPM)* |
Backwash Flow (GPM) |
Fleck Valve Head |
Resin Tank Size (Dia"xH") |
Brine Tank Size (Dia"xH") |
In/Out Connections (In.) |
Approx. Ship Weight |
||
Softening Resin (Only) |
Total (Incl. Underbed) |
5GPM per Sq.Ft. |
15 GPM per Sq.Ft. |
|||||||
| W-S744SM-*** | 0.5 |
0.6 |
1 |
4 |
1.5 |
5600 |
07 × 44 |
18 x 33 |
3/4 |
80 |
| W-S844SM-*** | 0.6 |
0.7 |
2 |
5 |
2 |
5600 |
08 × 44 |
18 x 33 |
3/4 |
85 |
| W-S940SM-*** | 0.75 |
0.85 |
2 |
6 |
2 |
5600 |
09 × 40 |
18 x 40 |
3/4 |
90 |
| W-S1054SM-*** | 1.25 |
1.45 |
2 |
7 |
3 |
5600 |
10 × 54 |
18 x 40 |
3/4 |
125 |
| W-S1252SM-*** | 1.75 |
2.05 |
4 |
12 |
4 |
2510 |
12 × 52 |
18 x 40 |
1 |
165 |
| W-S1354SM-*** | 2 |
2.3 |
4 |
14 |
5 |
2510 |
13 × 54 |
18 x 40 |
1 |
215 |
| W-S1465SM-*** | 3.0 |
3.5 |
5 |
16 |
6 |
2510 |
14 × 65 |
24 x 41 |
1 |
245 |
| W-S1665SM-*** | 3.5 |
4.0 |
7 |
21 |
7 |
2510 |
16 × 65 |
24 x 41 |
1 |
285 |
| W-S2162SM-*** | 6.0 |
7.0 |
13 |
36 |
12 |
2850 |
21 × 62 |
30 x 48 |
1.5 |
515 |
| W-S2472SM-*** | 8.0 |
10.0 |
15 |
47 |
15 |
2850 |
24 × 72 |
39 x 48 |
1.5 |
735 |
| W-S3072SM-*** | 12.5 |
16.5 |
24 |
74 |
25 |
3150 |
30 × 72 |
39 x 48 |
2 |
985 |
| W-S3672SM-*** | 17.0 |
22.0 |
35 |
106 |
35 |
3150 |
36 × 72 |
39 x 60 |
2 |
1385 |
| W-S4272SM-*** | 23.0 |
30.0 |
48 |
144 |
48 |
3900 |
42 × 72 |
42 x 60 |
3 |
2035 |
| W-S4872SM-*** | 30.0 |
43.6 |
60 |
188 |
60 |
3900 |
48 × 72 |
60 x 60 |
3 |
2735 |
*5 gpm per sq.ft. of water softener media is the best design condition for filtration. For relatively clean water, you may go up to design criteria of 15 gpm per sq. ft. Backwash flow rate for water softener is based on 25 psi pressure drop.
***Please add the appropriate voltage code to the end of the water softener model number when ordering. Example: W-S940SM-116
110v/60Hz = 116 |
220v/60Hz = 216 |
220v/50Hz = 215 |
| With Stainless Steel Jacket | With No Jacket |
 With Optional SS Jacket |
 |
Stainless Steel Jacket Adder for Water Softeners
If you would like to order a water softener with a Stainless Steel Jacket, please order the appropriate option from the below table along with your water softener model number.
|
|
||||||||||||||||||
For prompt, courteous and reliable service, contact us today! |