Applied Membranes Inc.
Products Overstock Sale How to Order About Us Contact Us Support & Downloads Technical Site Employment Search

Applied Media Filters

Multi-Media Filters for Sediment Removal

With AquaMatic® Valve Nests


About AquaMatic Valve Nest Media Filters

AquaMatic Valve Nests replace the standard single-valve controller head for larger systems. In valve nest filters a set of five valves controls service, backwash and rinse flows at different points in the system. This eliminates the need for a center riser tube and distributor resulting in better flow distribution for higher efficiency and lower pressure drops. Multiple filter tanks can be used in parallel for higher flow requirements.

All of the valves are automated by a central electronic controller. (Electromechanical or PLC Controller are available upon request.) The same controller can be used to automate up to four filter tanks simultaneously.


About Multi-Media Sediment Filtration

These filters contain several types of media and gravel under bedding. Multi-media filtration is a proven design concept; the coarse media layers in the top of the tank trap large particles, and successively smaller particles are trapped in the finer layers of media deeper in the bed.  The result is a highly efficient filtering since removal takes place throughout the entire bed.  Multi-Media depth filters typically remove particles 5-15 microns in size or larger.  All media included in our filters are carefully selected according to particle size, so the media retains its stratification during backwash and rinse.  Automatic backwashing system removes the trapped contaminants within the filter bed and washes them down the drain.


Multi-Media Filter Tank Assemblies

Includes Media Tank, Media, K53 Valve Nest, Distributor, Drain Line Flow Control and All Internal Piping.
Controller must be ordered separately (listed below).

Model No. Volume of Media*
(cu.ft.)
Flow Rate** (GPM) Backwash Flow** (GPM) Tank Size
(Dia." x H")
Line Size Approximate Shipping Weight
Recommended Maximum
W-M2472AV 10 15 47 50 24 x 72 1 1/2" 735 lbs
W-M3072AV 16 24 74 75 30 x 72 1 1/2" 985 lbs
W-M3672AV 23 35 106 110 36 x 72 2" 1,385 lbs
W-M5372AV 30 48 144 145 42 x 72 2" 2,035 lbs
W-M4872AV 40 60 188 190 48 x 72 3" 2,500 lbs
Notes: *Volume of Media shown is approximate and includes underbedding.

            

Controllers

Please select the correct Controller for your Application.
Available Voltages: 110v, 60Hz & 220v, 50/60Hz; Single Phase. Three Phase Not Available.

Description

Model Number

110v, 60Hz 220v, 50-60Hz
Single Filter Tank 1078838 1082179
2 Filter Tanks 1078839 1082180
3 Filter Tanks 1078840 1082181
4 Filter Tanks 1078841 1082182

Filter Specifications

  • Composite Media Tank with 6”Flange top and bottom openings. Rated at 150 psi maximum operating pressure, 120°F maximum operating temperature.
     
  • All systems automatic with timer based backwash.
    For multiple filter-tank systems, filters will backwash one at a time in sequence.
     
  • Schedule 80 PVC Piping

 

Top of page

For prompt, courteous and reliable service, contact us today!



Products | Overstock Sale | How to Order | About Us | Contact Us | Support & Downloads | Technical Site | Employment | Search
Reverse Osmosis Systems (RO Systems) | Water Treatment Systems | Membrane Elements | Reverse Osmosis Membranes ( RO Membranes) | Ultrafiltration Membranes ( UF Membranes) | Membrane Housings (Pressure Vessels) | Water Softeners | Media Filters| Water Filters | Home RO Accessories | Water Treatment Insturments | RO Pumps | Membrane Chemicals | Ultraviolet Water Systems (UV Systems) | Water Testers
Copyright © 2010 Applied Membranes, Inc. All Rights Reserved