VIQUA Sterilight Platinum Series Ultraviolet (UV) Systems

The VIQUA (R-Can) Sterilight Platinum Ultraviolet system is designed to optimize the fluid flow path and ensure the ultraviolet light is efficiently and uniformly delivered to any microbiological organism residing in the water. The Platinum reactor's unique flow distributor ensures that the water follows the most optimum path in its region, eliminating the short circuit flow path created by uneven flow within the reactor.   System Tested and Certified by NSF International against NSF Standard 55 for Disinfection Performance, Class A Models:  SPV-1.5, SPV-2.5, SPV-3.5, SPV-6, SPV-8, SPV-12, SPV-15, SPV-20

Features of the Sterilight Platinum Ice Controller 90-265 VAC universal operation Visual UV intensity reading (reads in % UV output) Visual elapsed time meter - displays remaining lamp life and total controller running time. Constant current output over entire line voltage Active power factor correction EMI/RFI filtering (meets new CE directives) One controller to drive all lamps Isolated power source for alarm system True lamp current detection Full diagnostic check on start-up Separate fuse protection for controller circuit. Dry contacts (for solenoid, lamps, audible alarms, etc.) RJ-11 communication port (sensor output & future RG remote alarm package) Universal IEC power input connector Additional Features of Sterilight Platinum Series Safety-Loc™ Connector - Interlock switch molded into the lamp connector, preventing lamp operation when the lamp is not fully inserted into the reactor chamber. This connector is keyed to the reactor chamber, allowing for the correct lamp orientation within the reactor, eliminating potentially false sensor readings. Flow-Pace™ UV Sensor - 254nm sensor capable of detecting a low-flow condition and automatically adjust the lamp power to the water flow, resulting in lower power consumption, reduced operational costs & less heat transfer into the water. Sterilume™ Lamps - Sterilight's low pressure high output lamp offering consistent UV output over the life of the lamp.

Flow Distributor Above image shows water track path lines as they go through the flow distributor   Flow Distributor Comparison Above image shows water track lines with no flow distributor     Platinum System   Platinum Ice Controller     Flow-Pace™ UV Sensor   Safety-Loc™ Connector

Sterilight Platinum Series UV Systems - NSF Certified - 316 SS

Please note that this product line has recently changed.  The newest information is in this table.  The  cross reference information and specifications for the old part #'s. are listed at the bottom of this page.  Click here to skip to that section.

Models listed above are 90-265v-50-60Hz w/Std North American 3 Prong Grounded Power Cord. For other power cord type, use appropriate suffix below:

Continental European 2-pin power = /2, • UK 3 Prong Grounded = /2B, • Australian 3 Prong Grounded = /2A • No Connector "Bare Leads" = NC, Example:  SPV-1.5/2B = British Power Cord.

*Flow rates stated as determined by NSF Standard 55 testing. (40 mJ/cm² @ UVT>75% @ fall-safe point).                                          
Please note that the NSF/ANSI Certified systems above contain a flow restrictor to limit the flow at the certified level.

Sterilight Platinum Series UV Systems - Non NSF Certified - 304 SS

Models listed above are 90-265v/50-60Hz with Standard North American 3 Prong Grounded Power Cord. For other power cord type, use appropriate suffix: Continental European 2-pin power = /2, •UK 3 Prong Grounded = /2B • Australian 3 Prong Grounded = /2A • No Connector "Bare Leads" = NC. Example: SP100-HO/2B = British Power Cord.

*Flow rates and dose stated at 95% UVT10

Sterilight Platinum Series Replacement Parts

All Replacement lamps & sleeves come with 2 O-rings

Discontinued Sterilight (R-Can) Platinum Series UV Systems  - NSF Certified

Please note that this product line has recently changed changed and the below systems are no longer available.   The below information is shown for cross-reference and support for existing products only.  Replacement parts will still be available through at least 2015.

For prompt, courteous and reliable service, contact us today!