Aquatec Delivery Pumps

---

The Aquatec Delivery Pump is designed for intermittent duty, though most models can be run continuously for hours at a time. This type of Aquatec Pump is commonly used either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase pressure when required.  These pumps can be controlled by either a pressure switch (“demand” mode) or an external power control device (“delivery” mode). When required, an integrated bypass can be incorporated to help regulate pressure levels.

Model No.	Flow (GPD)	Motor	Description
Delivery  Pumps
5852-7E12-J584	1 @ 60PSI to 1.5 Open Flow	110V w/ cord	Quick-Connect John Guest 3/8", Aluminum Base Plate - No Power Plug
5851-7E12-J574	.6 @ 60PSI to 1 Open Flow	24V	Quick-Connect John Guest 3/8" Aluminum Base Plate - Choose from Available Power Supplies.

Click for Installation Instructions

Shop online for Aquatec Pumps.

Typical Applications for Aquatec Delivery Pumps

• Water Treatment/RO
• Beverage/Foodservice(*)
• Distillation Equipment
• Agricultural Spraying
• General Industrial
• Automotive

Technical Information for Aquatec Delivery Pumps

• POWER: Available motors from 12VDC to 230VAC, energy requirements between 25W-100W (depending on flow, pressure). Can be used with compatible transformers and/or DC power supplies, to be ordered separately. Standard terminations are 12”, stripped end leadwires. Connectors and power cords are also available.
• ENVELOPE DIMENSIONS: Approximately 3”x 4”x 7”, weighing 6 lbs.
• MOUNTING: All positions. Standard offering is a steel mounting base with four hollow rubber grommets.
• CONTROL OPTIONS: Internal Bypass (20-200 psi), Pressure Switch (40-100 psi)
• FITTINGS: 5800 Series options include built-in 3/8”, 1/4", or 5/16” John Guest half cartridges.

For prompt, courteous and reliable service, contact us today!