Pyrolox Filters Iron Filters

Pyrolox Media Filters for Removal of Iron

About Pyrolox Filtration for Iron Removal:

A Naturally mined ore, Pyrolox is a mineral form of manganese dioxide which has been used in water treatment for more than 75 years. Pyrolox is a granular filtration media for hydrogen sulfide, iron and manganese reduction. Pyrolox functions as a catalyst, but itself remains relatively unchanged. Pyrolox works on a principle whereby the hydrogen sulfide, iron and manganese are oxidized and trapped on the media while simple backwashing cleans the bed. No chemical regeneration is required, nothing is imparted into the drinking water and Pyrolox has a high capacity for low contaminant concentrations. Pyrolox can be used in conjunction with aeration, chlorination, ozone or other pretreatment methods for difficult applications. Chlorine or other oxidants accelerate the catalytic reaction.

Advantages of Pyrolox Filters:

Effective reduction of iron, sulfur and manganese
Durable material with long service life and low annual attrition of bed
No chemical regeneration required, only periodic backwashing

Conditions for Operation for Pyrolox Iron Filters:

Water pH range: 6.5 - 9.0
Because of its heavy weight, it is very important that Pyrolox filters are backwashed properly to insure adequate bed expansion and continued service life.

Pyrolox Filters:

Model No.*	Media (Cu.Ft.)	Service Flow Rate** (GPM)	Backwash** (GPM)	Fleck Valve Head	Tank Size (Dia.” × H.”)	Pipe Size (in.)	Approx. Ship. Wt. (lbs)
W-MFI744P	0.3	1.3	7	5600	7 × 44	ľ	75
W-MFI844P	0.5	1.7	7	2510	8 × 44	1	95
W-MFI940P	0.6	2.2	12	2510	9 × 40	1	100
W-MFI1040P	1.0	2.7	17	2510	10 × 40	1	155
W-MFI1054P	1.0	2.7	17	2510	10 × 54	1	165
W-MFI1252P	1.5	3.9	17	2510	12 × 52	1	245
W-MFI1354P	2.0	4.6	25	2750	13 × 54	1	285
W-MFI1465P	2.5	5.3	25	2750	14 × 65	1	435
W-MFI1665P	3.0	7.0	30	2850	16 × 65	1.5	465
W-MFI2162P	4.0	12.0	49	2850	21 × 62	1.5	635
W-MFI2472P	6.0	15.7	60	3150	24 × 72	2	905

* Please add the appropriate voltage code to the end of the model no. when ordering.
110v/60Hz = 116, 220v/60Hz = 216, 220v/50Hz = 215 Example: W-MFI744P-116

** 5 gpm per sq. ft. of media is the best design condition for filtration. Backwash flow rate based on 25 psi pressure drop.

*** Stainless Steel Jacket available for 9-16” Diameter.