Complete Reverse Osmosis RO Systems

Designed to produce low dissolved solids water from tap or well water, these industrial RO systems use high efficiency reverse osmosis membranes. The RO product water is used in applications such as semiconductor, boiler feed, pharmaceutical, municipal, water reuse, food processing, bottling, and a wide variety of other applications for water purification.

Series K Reverse Osmosis Systems use 8” Diameter, 40” long  RO membrane elements. Membrane housing pressure vessels contain multiple RO membranes and are mounted in a horizontal position.

Key Features:

• Over 20 years of experience is reflected in our quality

• Heavy duty powder coated frame

• SS High pressure components, SS Pump

• Microprocessor Controlled Operation

• Conservatively engineered for reliable long term performance

• Factory tested to ensure trouble-free operation

STANDARD EQUIPMENT- Series K RO Systems

• Thin Film Composite Membranes

• FRP Pressure Vessels

• Motor Actuated Feed Valve

• Stainless Steel Centrifugal Pump

• Big Blue Filter for K-48B & K-68C,SS Housing for Others

• Low Pressure Shut-Off Switch

• Auto Feed Shut-Off

• Stainless Steel Flow Control

• Feed Pressure Gauges (2)

• System Pressure Gauges (2)

• Cleaning Ports (2)

• Permeate Flowmeter

• Concentrate Flowmeter

• Permeate TDS Display

• Powder Coated Frame

• ROC 150D Microprocessor/Controller Automatically Controls:
  – Motorized Actuated Feed Valve
  – Delayed High Pressure Pump Start-Up
  – Automatic Shut-Down at Tank Full
  – Low or High Pressure Fault Shut-Down
  – Pre-Treatment Lock-Out
  – Feed Water Flush at Shut-Down

• Two Panel Switches For:
  – Auxiliary Output enable/disable
  – System Power

• Five Indicator Lights:
  – On/Off
  – Backwash
  – Tank Full
  – LP Fault
  – HP Fault

• Hour Meter

Click on a photo to view larger image

• SS Filter Housing (K-48B & K-68C)
• Concentrate Recycle Flowmeter
• Permeate Flush System
• pH Monitor
• Temperature Gauge
• Float Tree for Storage Tank*
• Feed TDS Monitor
• Chemical Dosing System
• Feed Booster Pump
• Permeate Repressurization Pump

• PLC
• Differential Pressure Gauge
• ORP Monitor/Controller
• Integrated Cleaning
• Turbidity Meter
• Pre-Treatment Equipment:* Carbon filter, Water Softener, media filter
• Crating*

*Recommended Minimum Options

• All dimensions and weights are approximate.
• Systems rated at 77°F (25°C) using 1000 ppm to 3000 ppm feed water and approx. 225 psi (16 kg/cmē) pressure. System capacity changes significantly with water temperature and feed TDS. For higher TDS, a water analysis must be supplied and could result in modifications to the system.
• Chlorine must be removed prior to RO System if present in the feed water.
• Water must be pretreated by softener or antiscalant to avoid scaling the membranes.

• Click here for replacement Membranes

• Click here for replacement Membrane Pressure Vessels

• Click here for replacement Sediment Filters

• Click here for replacement Carbon Filters

• Click here for replacement Filter Housings

• Click here for replacement Components

• Click here for Membrane Cleaning Cartridges