|
| |
Sterilight "Silver Plus" (SSM) Ultraviolet (UV)
Disinfection Systems
The new Silver™ "PLUS" line
incorporates a UV intensity monitor in a modular line of ultraviolet
disinfection systems that can be used in a myriad of applications where
water quality is unknown and/or a monitoring system is required. The small
SSM-14 and SSM-17 systems are ideally suited for point-of-use filtration, RO
pre or post disinfection, while the larger SSM-24 through SSM-39 systems can
be used on a point-of-entry (whole home) system disinfection the water for
an entire home or cottage. Using Sterilume™-EX coated low pressure
germicidal UV lamps, these systems provide an economical way of treating
water requiring a 99.99% reduction in bacteria and viruses.
These systems are manufactured from 304 stainless steel and incorporate our
new Silver™ "PLUS" controller providing constant output current and a
universal power input (100-240V./50-60Hz.), as well as visually displaying %
UV output, remaining lamp life and total days of operation. Coupled with a
true 254nm UV intensity monitor, these systems are able to continuously
monitor the system and warn you of any changes in water quality or if the
water becomes unsafe to drink. The system also comes with a powered solenoid
output that allows you to hook a normally closed solenoid valve (sold
separately) directly into the controller. Additionally, an optional Y-cable
is available that provides a 4-20mA output for a physical connection to a
remote monitoring system. Systems are packaged in a new water-tight case and
come fully CSA and CE compliant.
|
 |
R-Can "Silver Plus Series" Ultraviolet
Water Disinfection Systems
|
Model # |
Flow Rate * |
Lamp Watts |
Inlet/Outlet Connection MNPT (In.) |
Reactor Dimensions
(LxDia.) |
Controller Dimensions
(LxHxD) |
Weight Lbs. |
|
@ 16 mJ/cm² |
@ 40 mJ/cm² |
|
GPM |
L/Min |
GPM |
L/Min |
| SSM-14 |
3.3 |
21.3 |
1.5 |
5.5 |
14 |
1/4 |
15.5" x 2.5" |
8.3"x3.2"x2.5" |
6 |
| SSM-17 |
4 |
0.9 |
2.0 |
7.5 |
17 |
1/2 |
17.1" x 2.5" |
8.3"x3.2"x2.5" |
7 |
| SSM-24 |
11 |
41.6 |
4.5 |
17 |
25 |
3/4 |
22.1" x 2.5" |
8.3"x3.2"x2.5" |
8 |
| SSM-37 |
20 |
75.7 |
7.8 |
29.3 |
37 |
3/4 |
35.6" x 2.5" |
8.3"x3.2"x2.5" |
11 |
| SSM-39 |
29 |
110 |
11 |
42 |
39 |
3/4F or 1M |
37.5" x 3.5" |
8.3"x3.2"x2.5" |
13 |
Models listed above are 100-130v/50-60Hz.
For 200-250v/50-60Hz, add “/2” to the end of the part number, example: SSM-14/2
*Flow Rates listed are dose dependant and are stated @ 95% UVT FOL. 40 mJ/cm2 = NSF/EPA Standard. 16 mJ/cm2 =
US Public Health Standard
Replacement Parts for
R-Can Ultraviolet UV Systems
| For System |
UV Lamp |
Quartz Sleeve |
|
SSM-14 |
S87RL |
QS-001 |
| SSM-17 |
S330RL |
QS-330 |
|
SSM-24 |
S463RL |
QS-463 |
| SSM-37 |
S810RL |
QS-810 |
| SSM-39 |
S36RL |
QS-012 |
|
|
Part # |
Description |
|
OR-212 |
O-Ring for Quartz Sleeves |
| BA-ICE-SM |
Monitored controller
(100-240v/50-60Hz) |
| 254NM-S1 |
UV Sensor for SSM-14, 17, 24, 37 |
| 254NM-S2 |
UV Sensor for SSM-39 |
|
R-Can UV Systems Technical Information
|
Note: Microorganisms require varying UV dose
levels for destruction. Some of the common organisms and their corresponding
dosage level are shown below.
|
Microorganism |
Dose (mJ/cm²) |
| E. Coli² |
6.6 |
|
Cryptosporidium parvum¹ |
<10 |
| Giardia lamblia¹ |
<10 |
|
Hepatitus Virus¹ |
8 |
| Influenza Virus¹ |
6.6 |
|
Shigella dysenteriae² |
4.2 |
| Legionella
pnuemophila² |
3.8 |
|
Salmonella paratyphi² |
6.1 |
1. 2-log reduction.
2. 4-log reduction |
|
|
|
