Single Water Softeners with Timered Valves

Single Water Softeners with a timered valve are programmed to regenerate at a specific time of day.  They are usually scheduled to regenerate at 2am, when the demands for soft water are expected to be very low.  These can be set to regenerate every day, every two to three days, or on certain days of the week.  

Please Select a Product Below

AMI Water Softeners Product Specifications

*5 gpm per sq.ft. of water softener media is the best design condition for filtration.  For relatively clean water, you may go up to design criteria of 15 gpm per sq. ft.  Backwash flow rate for  water softener is based on 25 psi pressure drop.
***Please add the appropriate voltage code to the end of the water softener model number when ordering.  Example:  W-S940SS-116

110v/60Hz = 116

220v/60Hz = 216

220v/50Hz = 215

With Stainless Steel Jacket	With No Jacket
With Optional SS Jacket

Stainless Steel Jacket Adder for Water Softeners

If you would like to order a water softener with a Stainless Steel Jacket, please order the appropriate option from the below table along with your water softener model number.

For prompt, courteous and reliable service, contact us today!