|
| |
R-Can Sterilight SQ/SQ GOLD Series Ultraviolet
(UV) Systems
R-Can SQ and SQ-GOLD series ultraviolet sterilizers were
designed for both residential and commercial/industrial applications. For
easy servicing the UV lamp can be changed without interrupting the water flow.
Electronic ballast features constant output current range independent of voltage
or frequency and improved surge protection.
Features & Specifications R-Can SQ UV Systems
- 99.99% destruction of bacteria, virus & protozoan
cysts (Giardia lamblia & Cryptosporidium) at rated flow.
- Sterilume-EX hard glass 265nm lamps with 9000 hour
lamp life
- 304 SS reactor chamber (316 SS available upon
request, Standard for S40Q)
- Open end quartz sleeve and aluminum gland nuts
- Audio/Visual annual lamp change reminder, Audible
Lamp Failure Indicator
- Drain port for reactor chamber flushing (S12Q/GOLD &
S40Q only)
- Maximum Operating Pressure: 125 psi (8.62 bar)
- Ambient Temperature: 36-104°F (2-40°C)
Additional Options Included in GOLD Series
UV Systems
- UV Monitor -
a true 254 nm ultraviolet sensor
incorporating individual calibration boards (allowed for field replacement
of sensor components if necessary) - audible and visual indicators included
as integral components.
- Solenoid Output -
works in conjunction with
the UV alarm allowing for the stoppage of water flow in the event that the
sensor detects the water is not adequately being treated or in case of power
failure - to be used in conjunction with optional normally-closed solenoid
valves.
- Infrared Output -
allows for remote monitoring
as well as a diagnostic tool for service technicians (microcontroller
incorporated into the circuitry to keep track of actual UV intensity and
elapsed running time). For remote audible and visual monitoring of the UV
sensor, use the optional UV-IRALARM.
|
|
R-Can UV Systems- SQ Series
|
Model # |
Flow Rate * |
Lamp Watts |
Inlet/Outlet Connection MNPT (In.) |
Dimensions, Inches |
Weight Lbs. |
|
@ 16 mJ/cm² |
@ 40 mJ/cm² |
Length |
Width |
Height |
Cell Dia. |
|
GPM |
L/Min |
GPM |
L/Min |
| S24Q |
50 |
189 |
20 |
76 |
78 |
1 |
37 |
7 |
9.5 |
4 |
23 |
|
S24Q-GOLD |
50 |
189 |
20 |
76 |
78 |
1 |
37 |
7 |
9.5 |
4 |
23 |
| S40Q |
80 |
303 |
60 |
227 |
156 |
1.5 |
38 |
9 |
12 |
6 |
51 |
|
S2Q** |
5 |
19 |
2 |
7.5 |
17 |
1/2 |
18.5 |
5 |
3.5 |
2.5 |
9 |
|
S2Q-GOLD** |
5 |
19 |
2 |
7.5 |
17 |
1/2 |
18.5 |
5 |
3.5 |
2.5 |
10 |
|
S5Q** |
9.5 |
35.5 |
3.5 |
13.2 |
24 |
3/4 |
22.0 |
5 |
3.5 |
2.5 |
12 |
|
S5Q-GOLD** |
9.5 |
35.5 |
3.5 |
13.2 |
24 |
3/4 |
22.0 |
5 |
3.5 |
2.5 |
13 |
|
S8Q** |
15.5 |
58 |
6 |
22.7 |
36 |
3/4 |
35.5 |
5 |
3.5 |
2.5 |
14 |
|
S8Q-GOLD** |
15.5 |
58 |
6 |
22.7 |
36 |
3/4 |
35.5 |
5 |
3.5 |
2.5 |
15 |
|
S12Q** |
24 |
90 |
9 |
34 |
39 |
1M, 3/4F |
37 |
7 |
8 |
3.5 |
18 |
|
S12Q-GOLD** |
24 |
90 |
9 |
34 |
39 |
1M, 3/4F |
37 |
7 |
8 |
3.5 |
18 |
Models listed above are 100-130v/50-60Hz.
For 200-250v/50-60Hz, add "/2" to the end of the part number, example:
S2Q/2.
*Flow Rates listed are dose dependant. 16 mJ/cm² = US Public Health
Standard, 40 mJ/cm² = NSF/EPA Standard. Dose/Flow shown @ 85% UVT.
**Please note that
the models S2Q through S12Q have recently been discontinued by the manufacturer
and are no longer available. The specifications are listed here for
reference only.
Please use the SQ-PA
series or
Platinum Series as a replacement.
We do still have limited quantities on hand of some models. Please contact
us for status.
|
Replacement Lamps and Quartz Sleeves-SQ Series
|
For System |
UV Lamp |
Quartz Sleeve |
| S2Q/G |
S330RL |
QS-330 |
| S5Q/G |
S463RL |
QS-463 |
| S8Q/G |
S810RL |
QS-810 |
|
S12Q/G |
S36RL |
QS-012 |
| S24Q/G |
S36RL
(Qty.2) |
QS-012 (Qty.2) |
| S40Q |
S36RL (Qty.4) |
QS-012 (Qty.4) |
Optional Equipment- SQ series
|
Model No. |
Description |
| IR-ALARM |
Remote Alarm (50') displays UV
intensity (55-99%) & elapsed running time |
| CS-MOL |
Cable to connect solenoid to unit
(Solenoid valves listed on page 5-14) |
|
Other Replacement Parts-SQ Series
|
Model No. |
Description |
| OR-212 |
O-Ring for Quartz Sleeve |
| 254NM-01 |
UV Monitor Assembly for S2QG -
S8QG |
| OR-12N |
O-Ring for UV-254NM01 |
| 254NM-08 |
UV Monitor Assembly for S12QG |
| 254NM-09 |
UV Monitor Assembly for S24QG |
| BA-ICE-3F |
Electronic Ice Ballast up to
S12QG (G), 100-130v or 200-250v |
| BA-E3612 |
Electronic Ballast for
S24Q(G), S40Q, 100-130v/50-60Hz |
| BA-E3622 |
Electronic Ballast for
S24(Q)200, S40Q200, 200-250v/50-60Hz |
| RN-001 |
Aluminum retaining nut |
| RN-001/2 |
Aluminum retaining nut with black
plug for ballast end. |
|
|
