Residential Tap Water Thin Film Reverse Osmosis Membranes (Home RO Membranes)

M-T1512A2, M-T1512A18, M-T1812A24, M-T1812A36, M-T1812A50 M-T1812A75 & M-T1812A100 models l are NSF certified for material requirements only. (M-T1812A150 is not certified)

AMI Membrane home membrane elements, are among the finest in the industry. With hundreds of thousands of membranes in operation world-wide, we offer these in a large range of both residential and commercial sizes AMI Membranes are Made in the USA in our ISO 9001:2008 Certified Facilities. For the past 25 years AMI Membrane elements have earned the reputation of consistent quality.

Membrane Model	Permeate Flow Rate		Minimum Salt Rejection (%)*†	Stabilized Salt Rejection (%)*†	Specification Sheets
Membrane Model	Gals/Day	Liters/Day	Minimum Salt Rejection (%)*†	Stabilized Salt Rejection (%)*†	Specification Sheets
M-T1512A12	12	45	96	98
M-T1512A18	18	68	96	98
M-T1812A24	24	91	96	98
M-T1812A36	36	136	96	98
M-T1812A50	50	190	96	98
M-T1812A75	75	284	96	98
M-T1812A100	100	379	96	98
M-T1812A150	150	568	96	98

*Salt Rejection shown is from internal test data.

Note: Performance specifications based on 500 ppm tap water, 50psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary ± 15%.

Home RO Membrane

M-T1512A12 through M-T1812A100

M-T1812A150

Please Note that we also offer Replacements for Rainsoft and Culligan Membranes. Click Here for More information.

Applied Membranes, Inc. supplies private label and custom membranes to OEMs all over the world for use in manufactured membrane systems. Click Here for More Information.

Home RO Membrane Dimensions

Model No.

A
Inches	Cm

B
Inches	Cm

C
Inches	Cm

M-T1512A12,18

11.75

29.85

10.0

25.4

1.5

3.81

M-T1812A24, 36, 50, 75, 100

11.75

29.85

10.0

25.4

1.75

4.57

M-T1812A150

11.75

29.85

10.0

25.4

1.95

5.0

RECOMMENDED OPERATION CONDITIONS

Maximum operation pressure	125 psi (0.86 MPa)
Maximum feed flow rate	2 gpm
Maximum operating temperature	113° F (45° C)
Maximum feed water turbidity	1 NTU
Maximum feed water SDI (15min)	5
Chlorine tolerance	0
Feedwater pH range, Continuous Operation	2-11
Feedwater pH range, Short-Term Cleaning (30min)	1-12
Minimum brine flow to permeate flow ratio	4:1

Top of page

For prompt, courteous and reliable service, contact us today!