8" Diameter End Port Fiberglass PROTEC Membrane Housings

8" Diameter End Port Fiberglass

Protec Arisawa Fiberglass Membrane Housings

Protec ariswa pressure vessels are designed for continuous use as housing for membrane filtration elements to purify typical waters at any positive pressure ratings from 150 PSI up to 1200 PSI. Models with a PSI of 150-600 purify typical brackish waters while models with a PSI of 1000-1200 purify typical seawater.

Protec vessels will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel.

Protec ariswa pressure vessels have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.

Request A Quote »

Benefits
Details
Features
Applications
Parts & Accessories
Literature

Benefits

Benefits of PROTEC Pressure Vessel Membrane Housings

Available in pressure ratings up to 1,200 PSI
Designed to work with any make of eight-inch spiral wound elements, as well as many hollow fiber elements
Designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X.
Multiple-Porting Technology

Details

Request A Quote »

Ordering Information for Protec 8” End Port Pressure Vessel Membrane Housings

Pressure Rating (PSI)	Model Number – Per Length, in Number of 8”×40” Elements per Vessel
Pressure Rating (PSI)	1 Membrane (40” L)	2 Membranes (80” L)	3 Membranes (120” L)	4 Membranes (160” L)	5 Membranes (200” L))	6 Membranes (240” L)	7 Membranes (280” L)
300	PRO-8-300-EP-1	PRO-8-300-EP-2	PRO-8-300-EP-3	PRO-8-300-EP-4	PRO-8-300-EP-5	PRO-8-300-EP-6	PRO-8-300-EP-7
450	PRO-8-450-EP-1	PRO-8-450-EP-2	PRO-8-450-EP-3	PRO-8-450-EP-4	PRO-8-450-EP-5	PRO-8-450-EP-6	PRO-8-450-EP-7
600	PRO-8-600-EP-1	PRO-8-600-EP-2	PRO-8-600-EP-3	PRO-8-600-EP-4	PRO-8-600-EP-5	PRO-8-600-EP-6	PRO-8-600-EP-7
1000	PRO-8-1000-EP-1	PRO-8-1000-EP-2	PRO-8-1000-EP-3	PRO-8-1000-EP-4	PRO-8-1000-EP-5	PRO-8-1000-EP-6	PRO-8-1000-EP-7
1200	PRO-8-1200-EP-1	PRO-8-1200-EP-2	PRO-8-1200-EP-3	PRO-8-1200-EP-4	PRO-8-1200-EP-5	PRO-8-1200-EP-6	PRO-8-1200-EP-7

Specifications for Protec 8” End Port Pressure Vessel Membrane Housings

PROTEC pressure vessels are sold complete with shell, end closure hardware, and mounting straps and saddles as detailed in drawings.
- 1-5 Element Lengths include 2 straps and 2 saddles
- 6 Element Lengths include 2 straps and 3 saddles
- Additional straps and saddles may be purchased separately if required.

Minimum Operating Temperature: 20°F
Please advise while ordering if continuous operating temperature is less than 45ºF.
Maximum Operating Temperature: 120°F
Operating pH Range: 3-11
Cleaning pH Range (Less than 30 minutes): 2-12

Maximum Feed TDS:
- PRO-8-150-EP: 10,000 ppm
- PRO-8-300-EP: 10,000 ppm
- PRO-8-450-EP: 10,000 ppm
- PRO-8-600-EP: 10,000 ppm
- PRO-8-1000-EP: 45,000 ppm
- PRO-8-1200-EP: 45,000 ppm

Factory Test Pressure:
- PRO-8-150-EP: 225 PSI
- PRO-8-300-EP: 450 PSI
- PRO-8-450-EP: 675 PSI
- PRO-8-600-EP: 900 PSI
- PRO-8-1000-EP: 1,500 PSI
- PRO-8-1200-EP: 1,800 PSI

Burst Pressure:
- PRO-8-150-EP: 900 PSI
- PRO-8-300-EP: 1,800 PSI
- PRO-8-450-EP: 2,700 PSI
- PRO-8-600-EP: 3,600 PSI
- PRO-8-1000-EP: 6,000 PSI
- PRO-8-1200-EP: 7,200 PSI

Features

PROTEC End Port Pressure Vessel Features

End Ported: Feed and concentrate connections placed in the end closure of the vessel head.
Shell: Filament Would, Epoxy FRP
End Plugs/Sealing Plates: PVC Thermoplastic
Retaining Rings: Stainless Steel
Each Pressure Vessel includes: Shell, 3 Saddles, 2 Straps with screws, 3 Shims/Spacers, and 2 Adapters with seals.

Applications

Applications for PROTEC Pressure Vessel Membrane Housings

Protec Arisawa Membrane Pressure Vessel Installation

Reverse Osmosis Systems
Ultrafiltration Systems
Nanofiltration Systems
Seawater Desalination
Brackish Water
Tap Water
Groundwater
Municipal
Potable Water
Water Treatment for Commercial and Industrial Use

Parts

Spare Parts for End Port Protec 8” Vessels

Part Description	For Protec Series No:
Part Description	8-150-EP	8-300-EP	8-450-EP	8-600-EP	8-1000-EP	8-1200-EP
Bearing Plate	4080027	4080027	4080029	4080031	4080033	4080033
Adapter Seal	6110326-N	6110326-N	6110326-N	6110326-N	6110326-N	6110326-N
Sealing Plate	4080065-1	4080065-1	4080065-1	4080065-1	4080065-1	4080065-1
Feed/Concentrate Port	4080176-1	4080176-1	4080176-1	4080176-1	4080231	4080231
Retaining Ring, F/C Port	6121187	6121187	6121187	6121187	6121187	6121187
Feed/Concentrate Port Seal	6184604-N	6184604-N	6184604-N	6184604-N	6184604-N	6184604-N
Head Seal U-Cup	6168434	6168434	6168434	6168434	6168434	6168434
Head Seal Quad Seal	6100442MK	6100442MK	6100442MK	6100442MK	6100442MK	6100442MK
Permeate Port Seal	6110229-N	6110229-N	6110229-N	6110229-N	6110229-N	6110229-N
Retaining Ring w/ finger pull	4080080	4080320	4080320	4080320	4080320	4080320
Thrust Ring	4080043	4080043	4080043	4080043	4080043	4080043