Activated Carbon Filters with Fleck Control Valves
AMI Activated Carbon (GAC) filters are used to reduce chlorine, organics, color, tannin, objectionable tastes and odors, and dissolved organic chemicals from municipal and industrial water supplies. Automatic backwashing system removes the trapped contaminants within the filter bed and washes them down the drain.
One of the most common applications for activated carbon filters is the reduction of the undesirable tastes and odors present in many chlorinated water supplies. Activated carbon has been successful for many years in the reduction of free chlorine from water supplies. The end product is clean, fresh water with no objectionable taste or odor characteristics. Carbon Backwash Filters are effective in a wide range of applications ranging from pre-treatment for other water purification systems to use as individual treatment equipment for the removal of specific impurities.
Request A Quote »Benefits
- Our Whole-House Carbon Systems Significantly Reduce the Following Contaminants
- Chlorine
- Chlorine By-Products - Trihalomethanes (THMs): A Group of organic chemicals, suspected of being carcinogenic.
- Bad Tastes & Odors
- Turbidity (Cloudy Water)
- Herbicides, Pesticides, & Insecticides
- Volatile Organic Chemicals (VOCs): Organic Chemicals that turn into vapor.
- Automatic Backwash Feature Reduces Maintenance, Maintains Filter Efficiency, and Prolongs the Life of the Filtration Media
Details
| Carbon Filter Model No.* | Flow Rate** (gpm) | Back Wash Flow (gpm) |
Volume of Resin (cu.ft.) | Resin Tank (Dia."×H") |
Fleck Valve | In/Out Conn. | Approx Ship Weight (lb) |
||
| 5gpm/ft² | 15gpm/ft² | GAC Carbon (Only) |
Total (Incl. Underbed) | ||||||
| W-G744 | 1 | 4 | 2.0 | 0.50 | 0.60 | 7×44 | 5600 | ¾" | 100 |
| W-G844 | 2 | 5 | 3.0 | 0.60 | 0.70 | 8×44 | 5600 | ¾" | 105 |
| W-G940 | 2 | 6 | 3.5 | 0.75 | 0.85 | 9×40 | 5600 | ¾" | 115 |
| W-G1054 | 2 | 7 | 4.0 | 1.25 | 1.45 | 10×54 | 5600 | ¾" | 150 |
| W-G1252 | 4 | 12 | 6.0 | 1.75 | 2.05 | 12×52 | 2510 | 1" | 190 |
| W-G1354 | 4 | 14 | 7.0 | 2.00 | 2.30 | 13×54 | 2510 | 1" | 225 |
| W-G1465 | 5 | 16 | 7.0 | 3.00 | 3.50 | 14×65 | 2510 | 1" | 335 |
| W-G1665 | 7 | 21 | 15 | 3.50 | 4.00 | 16×65 | 2510 | 1" | 385 |
| W-G2162 | 13 | 36 | 25 | 6.00 | 7.00 | 21×62 | 2850 | 1.5" | 645 |
| W-G2472 | 15 | 47 | 35 | 8.00 | 10.0 | 24×72 | 2850 | 1.5" | 950 |
| W-G3072 | 24 | 74 | 55 | 12.5 | 16.5 | 30×72 | 3150 | 2" | 1,535 |
| W-G3672 | 35 | 95 | 75 | 17.0 | 22.0 | 36×72 | 3150 | 2" | 1,950 |
| W-G4272 | 48 | 144 | 100 | 23.0 | 30.0 | 42×72 | 3900 | 3" | 2,950 |
| W-G4872 | 60 | 188 | 100 | 30.0 | 43.6 | 48×72 | 3900 | 3" | 4,360 |
Ordering Notes:
* Carbon Backwash Filters are available with several options of valve voltages. Please add the appropriate voltage code to the end of the model when ordering.
110v/60Hz = 116 Example: W-G744-116
220v/60Hz = 216 Example: W-G744-216
220v/50Hz = 215 Example: W-G744-215
**5 gpm per sq. ft. of media is the best design condition for filtration. For relatively clean water, you may go up to design criteria of 15 gpm per sq. ft. Backwash flow rate based on 25 psi pressure drop.
Skid mounting, control panel and custom sizes and configurations are available upon request.
|
|
|
| Carbon Backwash Filter with Optional SS Jacket | Skid Mounted Commercial Carbon Filter | Custom Industrial Carbon Filter Installation |
Features
- High quality liquid phase bituminous coal base carbon meets ANSI/NSF Standard 61 and Food Chemicals Codex Standards for drinking water applications. (Carbon filters using California Prop. 65 tested coconut shell carbon for CA drinking water applications are available upon request.)
- Fully automated with Pentair Fleck brand electromechanical control valve
- High quality FRP/Composite Resin Tank, rated at 150 psi maximum operating pressure and 120°F maximum operating temperature. (Optional stainless steel jackets are available for 9”-16” diameter tanks upon request.)
- Backwash: Time Clock Delayed (Metered, pressure-differential and PLC-controlled options are available upon request.)
- Manufactured in our ISO 9001:2015 Certified Facilities
- Backed by our Experienced Technical Support Staff
Applications
- Removal of Chlorine, Taste and Odor
- Whole-House Water Filtration
- Point of Entry Filtration (POE Filtration
- Water Filtration for Hotels, Spas, Resorts
- Pretreatment to Reverse Osmosis (RO) Membrane Systems for removal of oxidants such as chlorine
- Pretreatment to Ion Exchange Systems
- UF Post Treatment for taste and odor reduction
- Post Treatment for the reduction of disinfection by products (DBP)
- Beverage
- Food Processing
- Spot Free Rinse/Car Wash
- Labs
- Pharmaceutical
- Humidification
- Misting
- Rinse Water
- Bottled Water
- Ice Makers
Parts
Replacement Components
- Replacement Control Valves
- Replacement Resin Tanks
- Replacement Tank Components
- Replacement Carbon & Support Media
Optional Equipment: Stainless Steel Jackets (Add-On)Stainless Steel Jackets are available for 9” to 16” Diameter GAC Carbon Filters. To include a SS jacket with your carbon filter, please add the appropriate part number below to your RFQ or order. |
|
| Model No. | For Tank Size |
| A950-940 | 9" × 40" |
| A950-1054 | 10" × 54" |
| A950-1252 | 12" × 52" |
| A950-1354 | 13" × 54" |
| A950-1465 | 14" × 65" |
| A950-1665 | 16" × 65" |
Related Products
- Activated Carbon Filters with Automatic Backwash with Electronic Control Valves
- Multi Media Sediment Filters - for sediment removal with Fleck Control Valves
- Single Water Softeners with Timered Fleck Valves
- Single Water Softeners with Metered Fleck Valves
- Twin/Alternating Water Softeners with Metered Electronic Valves
Contact us
for a quote or for any additional information
or call us at 1.800.321.9321
