Brackish Water (FRP Wrapped) Membranes

AMI Membranes High Quality Membrane Elements
These commercial thin film BWRO elements are wrapped in a hard shell of FRP for added strength and to withstand higher pressure drops. High-flow option for higher permeate production are available in select sizes. (High-flow models are indicated by “AHF” at the end of the part number.)

AMI reverse osmosis membrane elements are among the finest in the industry. With hundreds of thousands of RO membranes in operation world-wide, AMI BWRO Membranes are Made in the USA in our ISO 9001:2015 Certified Facilities. Each reverse osmosis membrane element meets or exceeds our strict performance requirements before shipping. For the past 30 years we have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in reverse osmosis water treatment systems.

Purchase Now » Request A Quote »

Request A Quote »

Benefits
Details
Features
Applications
Parts & Accessories
Literature

Benefits

Hard fiberglass exterior provides added strength and withstands higher pressure drops than tape-wrapped elements.
Reverse osmosis membranes remove up to 99% of total dissolved solids.
RO membranes remove dissolved impurities such as chloride, lead, chromate, fluoride, bacteria and others.

Details

Request A Quote »

Model No.	Permeate Flow Rate		Size (Dia.”× Length”)	Single Element Recovery (%)	Minimum Salt Rejection (%)	Stabilized Salt Rejection (%)
Model No.	gpd	lpd	Size (Dia.”× Length”)	Single Element Recovery (%)	Minimum Salt Rejection (%)	Stabilized Salt Rejection (%)
M-B2514A	200	757	2.5 × 14	5	98	99.5
M-B2521A	325	1230	2.5 × 21	8	98	99.5
M-B2540A	1000	3785	2.5 × 40	15	98	99.5
M-B2540AHF	1060	4012	2.5 × 40	15	98	99.5
M-B4014A	525	1987	4.0 × 14	5	98	99.5
M-B4014AHF	655	2479	4.0 × 14	5	98	99.5
M-B4021A	900	3407	4.0 × 21	8	98	99.5
M-B4021AHF	1125	4258	4.0 × 21	8	98	99.5
M-B4040A	2400	9084	4.0 × 40	15	98	99.5
M-B4040AHF	3000	11355	4.0 × 40	15	98	99.5

Note: Performance specifications based on 2,000 mg/l sodium chloride, 225 psi (1.6 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.