DOW FilmTec Sanitary and Full-Fit Membrane Elements
DOW FILMTEC sanitary full fit reverse osmosis membrane elements specifically designed for use in sanitary, evaporator, and medical applications. The full-fit configuration minimizes stagnant areas and is an ideal choice for applications requiring a sanitary design.
- The DOW RO-390-FF product is a premier membrane for evaporator condensate polishing.
- HYPERSHELL HSRO heat sanitizable reverse osmosis membrane elements deliver exceptional quality water with the added capability to withstand sanitization with hot water.
Benefits
Benefits of DOW FilmTec Sanitary & Full Fit RO Elements
- Reverse Osmosis removes up to 99% of total dissolved solids.
- Full-fit design minimizes stagnant areas for applications requiring a sanitary design.
- HSRO elements are heat sanitizable.
- All components comply with U.S. Food & Drug Administration standards.
- High flux rates
- Consistent quality from automated rolling
Details
DOW FilmTec Sanitiary Grade Full Fit RO Membrane Elements
DOW FILMTEC RO Full Fit elements deliver high flux and outstanding quality water for applications requiring sanitary-grade membrane elements. The full-fit configuration minimizes stagnant areas and is optimal for applications requiring a sanitary design. DOW FILMTEC™ RO-390-FF elements are the premier membrane for evaporator condensate polishing.
|
Model No. |
Permeate Flow Rate |
Size (Dia.× L) |
Active Surface Area |
Applied Pressure |
Stabilized Salt Rejection |
|
|
RO-4040-FF |
2,400 gpd |
9.1 m3/d |
4”×40” |
85 ft2 |
225 psi |
99.5% |
|
RO-390-FF |
10,800 gpd |
40.93d |
8”×40” |
390 ft2 |
225 psi |
99.5% |
Permeate flow and salt rejection based on the following test conditions: 2,000 ppm NaCl, pressure specified above, 77°F (25°C) and 15% recovery. Elements must be conditioned prior to start-up. A one-time flux loss will occur during stabilization. Listed values apply after performance stabilization. Permeate flows for individual elements may vary +/-20%.
DOW FilmTec Heat-Sanitizable Full Fit RO Membrane Elements
DOW FILMTEC HSRO Elements are heat-sanitizable reverse osmosis elements that deliver outstanding quality water with the added capability to withstand sanitization with hot water, eliminating the need for chemical sanitizers. The full-fit configuration minimizes stagnant areas and is optimal for applications requiring a sanitary design.
|
Model No. |
Permeate Flow Rate |
Size (Dia.× L) |
Active Surface Area |
Applied Pressure |
Stabilized Salt Rejection |
|
|
HSRO-4040-FF |
1,900 gpd |
7.2 m3/d |
4”×40” |
90 ft2 |
150 psi |
99.5% |
|
HSRO-390-FF |
9,000 gpd |
34.1 m3/d |
8”×40” |
390 ft2 |
150 psi |
99.5% |
Permeate flow and salt rejection based on the following test conditions: 2,000 ppm NaCl, pressure specified above, 77°F (25°C) and 15% recovery. Elements must be conditioned prior to start-up. A one-time flux loss will occur during stabilization. Listed values apply after performance stabilization. Permeate flows for individual elements may vary +/-20%.
Features
DOW FilmTec Sanitary & Full Fit Element Features
- High Flux Results in High Yields
- High Rejection Results in Excellent Water Quality
- Heat Sanitizable
- Full-Fit Design
- Consistent Quality from Automated Rolling
- FilmTec Performance and Quality
- DOW FILMTEC RO-4040-FF, RO-390-FF, HSRO-4040-FF and HSRO-390-FF are FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.
Applications
Applications for FilmTec Sanitary & Full Fit RO Elements
|
|
Literature
FilmTec Sanitary & Full Fit RO Element Product Data Sheets
- DOW FILMTEC RO-4040-FF Sanitary Full-Fit RO Element
- DOW FILMTEC RO-390-FF Sanitary Full-Fit RO Element
- DOW FILMTEC HSRO-4040-FF Heat-Sanitizable RO Element
- DOW FILMTEC HSRO-390-FF Heat-Sanitizable RO Element
FDA Compliance Letter for DOW FilmTec Sanitary & Full Fit RO Elements
Contact us
for a quote or for any additional information
or call us at 1.800.321.9321
