J Series - Reverse Osmosis Systems 7,000 to 28,800 GPD
Designed to produce low dissolved solids water from tap or well water, these high quality commercial RO systems use highly efficient RO Membranes. The RO product water is used in commercial and light industrial applications such as rinse water, pharmaceutical, food processing, bottled water, hotels, beverage, hospitals, and a wide variety of other applications.
Series J Reverse Osmosis Water Filtration Systems use 4”×40” RO membrane elements. RO Membrane Housing Pressure vessels contain one or two reverse osmosis membrane elements each and are mounted in a horizontal position.
RO Systems are shipped ready for immediate on-line service. The high quality, innovative design of AMI's J-Series RO Systems has given these systems the reputation as the most reliable and cost effective solution for tap or well water purification.
Request A Quote »Benefits
|
|
Details
J Series Commercial Reverse Osmosis Systems Ordering Information
|
RO System Model No. |
RO System Capacity |
# of Elements |
Line Sizes |
||||
|
GPM |
GPD |
m³/hr |
Inlet |
Perm. |
Conc. |
||
|
J-44A |
5 |
7,000 |
1.1 |
4 |
1 |
¾ |
¾ |
|
J-54A |
6 |
8,500 |
1.3 |
5 |
1 |
¾ |
¾ |
|
J-64A |
7 |
10,000 |
1.6 |
6 |
1 |
¾ |
¾ |
|
J-74A |
8 |
11,500 |
1.8 |
7 |
1 |
¾ |
¾ |
|
J-84B |
9 |
13,000 |
2.0 |
8 |
1½ |
1 |
¾ |
|
J-104B |
10 |
14,400 |
2.3 |
10 |
1½ |
1 |
¾ |
|
J-124B |
12 |
17,300 |
2.7 |
12 |
1½ |
1 |
¾ |
|
J-144B |
14 |
20,000 |
3.2 |
14 |
1½ |
1 |
¾ |
|
J-164B |
16 |
23,000 |
3.6 |
16 |
1½ |
1 |
¾ |
|
J-184B |
18 |
26,000 |
4.1 |
18 |
1½ |
1 |
¾ |
|
J-204B |
20 |
28,800 |
4.5 |
20 |
1½ |
1 |
¾ |
J Series Commercial Reverse Osmosis Systems Dimensions
|
RO System Model No. |
Standard System Dimensions |
|
System with CIP Dimensions (in/cm)
|
||||
|
Length |
Width |
Height |
Length | Width | Height | ||
|
J-44A |
80/203 |
35/89 |
75/191 |
1,070/485 |
112/285 | 45/114 | 75/191 |
|
J-54A |
80/203 |
35/89 |
75/191 |
1,130/513 |
112/285 | 45/114 | 75/191 |
|
J-64A |
80/203 |
35/89 |
75/191 |
1,190/540 |
112/285 | 45/114 | 75/191 |
|
J-74A |
80/203 |
35/89 |
75/191 |
1,275/578 |
112/285 | 45/114 | 75/191 |
|
J-84B |
100/254 |
35/89 |
75/191 |
1,410/640 |
132/335 | 45/114 | 75/191 |
|
J-104B |
100/254 |
35/89 |
75/191 |
1,530/694 |
132/335 | 45/114 | 75/191 |
|
J-124B |
100/254 |
35/89 |
75/191 |
1,610/776 |
132/335 | 45/114 | 75/191 |
|
J-144B |
100/254 |
35/89 |
75/191 |
1,830/830 |
132/335 | 45/114 | 75/191 |
|
J-164B |
100/254 |
35/89 |
75/191 |
1,950/885 |
132/335 | 45/114 | 75/191 |
|
J-184B |
100/254 |
35/89 |
80/203 |
2,070/939 |
132/335 | 45/114 | 75/191 |
|
J-204B |
100/254 |
35/89 |
80/203 |
2,190/993 |
132/335 | 45/114 | 75/191 |
Examples of AMI J Series RO System Installations Currently In Service:
 Provides Water for an Island Resort from Brackish Well Water |
 Water for Food Processing - with SS Carbon Tanks & Insulated Pipes |
 Reverse Osmosis for Bottled Water Production |
 Provides Water for an Island Resort from Brackish Well Water |
Notes and Voltage/ Ordering Information
- All dimensions and weights are approximate.
- RO System Capacity Basis: 24 hrs/day.
- RO Systems rated at: 77°F (25°C) using 2000 ppm sodium chloride solution operating at approx. 225-250 psi pressure.
- Minimum feed pressure to RO System: 40-60 PSI.
- RO System capacity changes significantly with water temperature.
- For higher TDS a water analysis must be supplied and could result in modifications to the RO system design.
- Chlorine must be removed with a carbon filter or with chemical injection prior to the RO system, if present in feed water.
- Pretreatment for water hardness using a softener or antiscalant injection should be added to avoid scaling the RO membranes.
- Feed water turbidity: Less than 1 NTU; Feed water silt density index (SDI): 3 maximum. If exceeded, pretreatment with media filter recommended. All pretreatment equipment and SDI test kits are available from Applied Membranes.
Please add our voltage codes to the end of the model number when ordering:
Example: J-84B-236 = 220/230v/3 ph/60 Hz
|
Voltage Codes: (Single Phase Not Available) |
|
|
Features
Standard Equipment
|
|
Microprocessor Controller for Automatic Operation
Monitors and/or Controls:
Controller Features:
|
UL508A Labeled
I-ROC150S
LED Display:
|
Applications
|
|
Parts
Optional Equipment
|
|
Replacement Parts & Consumables
- Replacement Reverse Osmosis Membrane Elements for Commercial RO Systems
- Replacement Membrane Pressure Vessels for Commercial RO Systems
- Replacement Sediment Filter Cartridges for Commercial RO Systems
- Replacement Carbon Filter Cartridges for Commercial RO Systems
- Replacement Filter Housings for Commercial RO Systems
- Replacement Components for Commercial RO Systems
- RO Membrane Cleaning Cartridges
Contact us
for a quote or for any additional information
or call us at 1.800.321.9321
