Nitrate Removal Filter Cartridges
The NRC brine regenerable RO polishing will remove virtually all of the nitrates and sulphates from tap water or RO product water for approximately 7,500 ppm gallons. The NRC is particularly useful as an RO polisher (since membrane rejection of nitrates can be limited) or in waters containing low sulphates. The NRC can be regenerated using sodium chloride brine.
These filter cartridges will work in most 10" standard filter housings.
Purchase Now » Request A Quote »Benefits
Benefits of AMI NRC Nitrate Removal Filter Cartridges
- Can be Regenerated Using a Sodium Chloride Brine
- Removes Virtually All of the Nitrates, Nitrites and Sulphates from Tap or RO Water
- Standard Cartridge Design Fits Most Standard 10” Filter Housings
Details
AMI NRC Nitrate Removal Filter Cartridges Ordering Details
|
Model No. |
For Use in Housing |
Service Flow (GPM) |
Capacity |
|
NRC |
10” Standard |
0.5 – 0.75 |
7,500 ppm gal* |
* Third party tested to remove 99% of influent nitrates from a 71 ppm (as CaCO )spiked stream for 200 gallons. Capacity of the NRC cartridge is approximately 7500 ppm. To determine gallons, divide 7500 ppm by the total ppm of nitrates plus sulphates (as CaCO ) to be removed. The result is the number of gallons that can be treated with complete nitrate/sulphate removal.
Instructions for Regenerating Nitrate Removal Filter Cartridges:
To regenerate:
- Place a second filter housing containing a filter cartridge full of softener salt before the filter housing containing the Nitrate Removal filter so that the water coming out of the salt filter will go to the Nitrate Removal filter.
- Run the water very slowly (approx. 0.25 GPM for a 10" filter) through the cartridges until the salt is gone.
- Each time the nitrate removal filter is regenerated, approximately 80% of the capacity is restored.
1st regeneration: 80% original capacity for nitrate removal
2nd regeneration: 64% original capacity for nitrate removal
3rd regeneration: 51% original capacity for nitrate removal
4th regeneration: 40% original capacity for nitrate removal
We do not recommend regenerating the nitrate removal filters more than four times.
Features
AMI NRC Nitrate Removal Filter Cartridge Features
- Food Grade High Capacity Anion Exchange Resin
- Constructed from FDA Grade Materials
- Post Filter: 20 Micron Spun-Bonded Polypropylene
- Pre-Filter: 100 Micron Reticulated Poly Foam
- Operating pH Range 5 to 9
Applications
Applications for AMI NRC Nitrate Removal Filter Cartridges
- Post Treatment for RO Systems
- Nitrate Removal
- Drinking Water Filtration
- Espresso Machines
- Ice Makers
- Refrigerators
- Lead Removal
- Removal of Heavy Metals
- Low Volume Beverage and Food Service
- General Water Purification Operations
Contact us
for a quote or for any additional information
or call us at 1.800.321.9321
