Scalestick Scale Inhibitor Filter to Prevent Scaling and Corrosion
HydroBlend is a unique composition blended to provide superior limescale (calcium carbonate) prevention and corrosion control in water fed equipment. The system feeds a controlled amount of specially blended scale control compounds into the water stream. The SS-10 ScaleStick is a stand-alone cartridge that fits standard 10” water filter housings allowing them to be used in existing installations.
Benefits
- Scale Prevention & Corrosion Control Providing Longer Equipment Life
- Less Water Related Service Calls Lowering Maintenance Costs
- Reduced Mineral Scale Deposits Lowering Operating Costs
- Standard Cartridge Design Fits Most Standard 10” Filter Housings
- No electricity, maintenance, or guess work is required.
- A simple glance at the cartridge indicates when replacement is needed.
- HydroBlend is unaffected by high temperatures, providing effective treatment for hot water equipment.
Details
|
Model No. |
For Use in Housing |
Service Flow (GPM) |
Capacity |
|
SS-10 |
10” Standard |
0.2 – 1 |
2-6,000 gal. |
Although all ScaleStick cartridges allow water to flow at much higher flow rates than their rated service flow range, choosing the correct cartridge for the specific application will ensure proper feed rates and treatment duration. The preferred flow rate range is the average flow rate encountered in a specific application. For example, even though a household may occasionally flow 10 gpm if enough faucets or appliances are being used, the typical average flow in a residential application is one faucet on at a time or 1-3 gpm depending on the outlet. All applications are sized for the average flow rate encountered, not peak flow rates.
Features
- Genuine HydroBlend Media
- NSF Certified: The SS-10 is Tested and Certified By NSF International against NSF/ANSI Standard 42 for material requirements only.
Applications
- Reverse Osmosis Pretreatment
- Ice Machines,
- Coffee Makers
- Espresso Machiens
- Steamers
- Combination Ovens
- Proofers
Contact us
for a quote or for any additional information
or call us at 1.800.321.9321
