Tank Level Control Float Switches & Trees
Float switches and float trees serve as level controls to detect the level of the water in an atmospheric storage tank. When the water level reaches the set level, the float switch sends a ‘tank full’ signal to the system controller.
When used in conjunction with an ROC or PLC automated system controller and inlet solenoid valves, the tank level controls provide automatic system shut off when tank is full, and restart when tank level falls below a set level.
For use with atmospheric storage tanks or other non-pressurized reservoir.
Request A Quote »
Benefits of Tank Level Float Switches and Float Trees
- Automatic operation of an RO system when used in conjunction with a system controller and solenoid.
- Proven components with a history of quality.
Request A Quote »
Tank Level Control Details and Ordering Information
See product specifications in “Literature tab” for more information on each model.
|Material & Cofiguration
|Horizontal PP Switch may be used in Normally Closed or Normally Open Position. Corrosion resistant FDA materials. Relays up to 0.080A (120VAC).
|Full Size SS Float Switches may be configured from wet open to dry open or vice-versa by simply removing the retaining ring and reversing the float. WET OPEN – The switch opens as the float approaches the hex (threads): the contact closes as the float approaches the stop ring. DRY OPEN – The switch opens as the float approaches the stop ring; the contact closes as the float approaches the hex (threads).
|Miniature Vertical-Mount Float Switches can be mounted up or down as they open on rise or close on rise by reversing the float. Magnetic float and hermetically sealed magnetic reed switch relays up to 0.080A (120 VAC).
|Miniature Float Switch, Dual Level w/ Cable Mounting, Normally Closed, Type M2L
|Miniature Float Switch, Dual Level w/ Cable Mounting, Normally Open, Type H2L
|Float Tree Assembly, Pre-Assembled with 2 Polypropylene Floats
|Float Tree Assembly, Pre-Assembled with 2 Stainless Steel Floats
|Float Tree Assembly, Pre-Assembled with 3 Polypropylene Floats
|Float Tree Assembly, Pre-Assembled with 3 Stainless Steel Floats
Tank Level Float Switches and Float Trees Features
- Polypropylene and Stainless Steel Models Available
- Offered in Horizontal and Vertical Configurations
- Pre-Assembled Float Trees Available
Applications for Tank Level Floats
Tank Level Control and System Automation for Commercial & Industrial RO Systems
for a quote or for any additional information
or call us at 1.800.321.9321