In-Line TDS Water Quality Monitors for Home RO Systems by HM Digital
HM Digital TDS Monitors are available in single and double monitor configurations:
HM Digital Dual TDS Monitors measure the tap water coming in vs. the purified water going out of your water filtration system at any time.
Single TDS Monitors, ideal for any water filtration system including reverse osmosis systems, coolers and more, display TDS level of a single water line.
Purchase Now » Request A Quote »Benefits
Benefits of HM Digital Home RO TDS Monitors:
- Install on a home RO System to measure and display the TDS levels of the purified product water and/or incoming feed water.
- Highly efficient and accurate due to its advanced microprocessor technology.
- Auto-Off function conserves battery power. The monitor shuts off automatically after non-use.
Details
HM Digital Home RO TDS Monitor Ordering Information
|
Model No. |
Description |
Measures |
Range |
Sensors |
Accuracy |
|
DM-1 |
In-Line Dual TDS Monitor |
TDS |
Dual Range: |
Dual |
± 2% |
|
DM-2 |
Commercial In-Line Dual TDS Monitor With Additional Features |
TDS |
Dual Range: |
Dual |
± 2% |
|
SM-1 |
In-Line Single TDS Monitor |
TDS |
Dual Range: |
Single (1) |
± 2% |
|
QC-1 |
Quick Check “Push to Check” Monitor with Green “Good” and Red “Service” Lights. Eight programmable set points. |
TDS & Conductivity |
0-5,000 ppm |
Single (1) |
± 3% |
|
DM-1 Dual Inline TDS Monitor |
DM-2 Dual Inline TDS Monitor |
SM-1 Single Inline TDS Monitor |
|
QC-1 Single Inline TDS Monitor |
QC-1 Single Inline TDS Monitor in Use |
Note: Tee fitting (sold separately) with a 1/4" connection is required for installation. Refer to Applied Membranes part # F-4UT44QC (1/4" Tube) or F-6UT64QC (3/8" Tube).
Features
Features of HM Digital Home RO TDS Monitors:
- Factory calibrated with a 342 ppm NaCl solution. TDS Meters can be recalibrated with a mini-screwdriver.
- Cable Length: 24.5” (including sensor)
- 1 Year Warranty
Additional Features of DM-2:
- Water-Resistant
- In-Line Dual TDS
- 1/4" Quick Connect In/Out connections. (3/8" QC available - use part # DM2-38 to order)
- Larger Display
- Digital TDS Calibration
- 46” Shielded Cables
- 3 Year Warranty
Contact us
for a quote or for any additional information
or call us at 1.800.321.9321
