Model No.
|
System Capacity
|
Membrane Elements
|
Line Sizes (NPT, Inches)
|
System Dimensions (in/cm)
|
Approx. Shipping Weight (Lb/Kg)
|
GPD
|
LPD
|
Qty.
|
Size (Dia.×L)
|
Inlet
|
Perm.
|
Conc.
|
Width
|
Depth
|
Height
|
Maritime 150
|
150
|
567
|
1
|
2.5 x 21”
|
¾
|
¼
|
½
|
25.1/63.8
|
19/48.3
|
12.5/31.6
|
110/50
|
Maritime 300
|
300
|
1135
|
2
|
2.5 x 21”
|
¾
|
¼
|
½
|
25.1/63.8
|
19/48.3
|
12.5/31.6
|
115/52
|
Maritime 400
|
400
|
1514
|
1
|
2.5 × 40”
|
¾
|
⅜
|
½
|
44.2/112
|
19/48.3
|
12.5/31.6
|
130/60
|
Maritime 800
|
800
|
3028
|
2
|
2.5 × 40”
|
¾
|
⅜
|
½
|
44.2/112
|
20/50.8
|
18/45.7
|
140/65
|
Maritime 1200
|
1,200
|
4542
|
3
|
2.5 × 40”
|
1
|
⅜
|
½
|
44.2/112
|
20/50.8
|
18/45.7
|
150/70
|
Maritime 1600
|
1,600
|
6056
|
4
|
2.5 × 40”
|
1
|
⅜
|
½
|
44.2/112
|
20/50.8
|
18/45.7
|
180/80
|
Model No.
|
System Pressure
|
Power
|
Motor
|
Electrical
|
Fully Automated
|
Normal
PSI/BAR
|
Max
PSI/BAR
|
kW
|
Amps
|
HP
|
FLA
|
Type
|
Voltage
|
Freq
|
Phase
|
Maritime 150
|
700/48
|
1000/69
|
0.65
|
7/3.5
|
1
|
12.8
|
TEFC
|
115/240
|
50/60
|
1
|
Yes
|
Maritime 300
|
800/55
|
1000/69
|
0.75
|
8.1/4
|
1
|
12.8
|
TEFC
|
115/240
|
50/60
|
1
|
Yes
|
Maritime 400
|
700/48
|
1000/69
|
0.95
|
12.5/6.25
|
1.5
|
23/11.5
|
TEFC
|
115/240
|
50/60
|
1
|
Yes
|
Maritime 800
|
750/52
|
1000/69
|
1.4
|
15.5/7.75
|
2.5
|
23/11.5
|
TEFC
|
115/240
|
50/60
|
1
|
Yes
|
Maritime 1200
|
800/55
|
1000/69
|
1.5
|
16.5/8.25
|
2.5
|
23/11.5
|
TEFC
|
115/240
|
50/60
|
1
|
Yes
|
Maritime 1600
|
800/55
|
1000/69
|
2.1
|
22/11
|
2.5
|
23/11.5
|
TEFC
|
115/240
|
50/60
|
1
|
Yes
|
Notes and Voltage/Ordering Information
* Requires the use of optional tank float switches
- All dimensions and weights are approximate and subject to change. Performance Based on 32,000 ppm seawater at 77°F (25°C).
- Voltage: Please add our voltage codes to the end of the model number when ordering. Example: Maritime 150-216.
Voltage Codes:
|
- 116 = 110v, 1ph, 60hz
- 216 = 220/230v, 1ph, 60hz
- 215 = 220/230v, 1ph, 50hz
|
- 236 = 220 or 230v/ 3ph/ 60hz
- 235 = 220v/3ph/50hz
|
Options & Accessories for Maritime Watermaker RO System
AMI's Watermakers are available with a wide variety of optional add-on accessories. All assemblies include hardware and mounting equipment for easy upgrade to your new or existing system installation.

Plankton Filter Removes plankton and other large particles from the watermaker feed water to provide additional protection and extended life of the system prefilter. 100 Micron 10" Filter Cartridge in a clear housing on a powder coated mounting bracket. Includes isolation valves for easy cartridge change. Model # A629
|

Oil Water Separator Nothing fouls a membrane faster than oil. Protect your Watermaker RO System & Membranes from oily or polluted water. 20" Filter Cartridge in a Big Blue housing on a powder coated mounting bracket. Includes isolation valves for easy cartridge change. Model # A630
|

Remote Control Connects to the main control board with a standard Cat5 cable, allowing you to start, stop, and monitor your watermaker from nearly anywhere. Designed for easy installation at a navigation station, galley, or pilothouse. Simple LED's show system status. Model WMC-1-RMC
|

Commercial Pre-Filter The commercial sized filter cartridge has a dual-micron rating for extended life, and will provide longer intervals between changing the system prefilter. The outer layer will trap particles larger than 75 Micron, while the inner layer traps particles of 25 Micron. 20" Filter Cartridge in a Big Blue housing on a powder coated mounting bracket. Includes isolation valves for easy cartridge change. Model A711
|

Membrane Preserving Cartridges Pickling your watermaker system using AMI's exclusive preservative has never been simpler. Install this filter cartridge into your system and preserve the membranes in-place for extended periods of system shut-down. No more messing around with hoses, valves and plumbing connections. Cartridge for 10" Std.: C-C2510-A88
|

Membrane Cleaning Cartridges Just like membrane preservative cartridges, but with chemicals designed to remove scale and bio-fouling from watermaker membranes. Clean membranes without removing them from your system, or altering valves, hoses or plumbing connections. Reduce downtime, maintain system performance, and prolong membrane life. 10" Std. (removes Scale): C-C2510-A11 10" Std. (removes organics): C-C2510-A22
|

Media Filter Removes suspended solids larger than 30 microns to greatly extend prefilter life and provide additional protection to the system. The 8x18" media tank is mounted on a powder coated frame with in/out pressure gauges and a valve for manual backwash. Multiple sizes available for higher flow rates. Up to 3gpm: Model W-MB0818
|
|

Ultraviolet Disinfection System Ultraviolet Water System for the fresh water stream to sterilize 99.8% of all micro-organisms including reproducing bacteria and viruses. See our website for more information |
Related Products
Voyager Modular Watermakers
The AMI Voyager Modular series watermaker systems are designed for applications with limited space. Instead of a traditional one-piece frame, these space-saving systems are sold in several modules which can be installed into smaller spaces and connected together.
This design makes them ideal for use on yachts, boats, or cruise ships with limited space.
SY Series Watermakers for Small Commercial and Industrial Applications
Our Small Commercial SY Series Seawater Desalination RO Systems convert seawater to drinking water. Their design makes them suitable for land based applications with more extensive pre or post treatment.
This design makes them ideal for use on yachts, boats, or cruise ships with limited space.
Replacement Parts & Consumables for Watermaker Seawater Desalinator RO Systems