DOW FilmTec Sanitiary Grade Full Fit RO Membrane Elements
DOW FILMTEC RO Full Fit elements deliver high flux and outstanding quality water for applications requiring sanitary-grade membrane elements. The full-fit configuration minimizes stagnant areas and is optimal for applications requiring a sanitary design. DOW FILMTEC™ RO-390-FF elements are the premier membrane for evaporator condensate polishing.
Model No.
|
Permeate Flow Rate
|
Size (Dia.× L)
|
Active Surface Area
|
Applied Pressure
|
Stabilized Salt Rejection
|
RO-4040-FF
|
2,400 gpd
|
9.1 m3/d
|
4”×40”
|
85 ft2
|
225 psi
|
99.5%
|
RO-390-FF
|
10,800 gpd
|
40.93d
|
8”×40”
|
390 ft2
|
225 psi
|
99.5%
|
Permeate flow and salt rejection based on the following test conditions: 2,000 ppm NaCl, pressure specified above, 77°F (25°C) and 15% recovery. Elements must be conditioned prior to start-up. A one-time flux loss will occur during stabilization. Listed values apply after performance stabilization. Permeate flows for individual elements may vary +/-20%.
DOW FilmTec Heat-Sanitizable Full Fit RO Membrane Elements
DOW FILMTEC HSRO Elements are heat-sanitizable reverse osmosis elements that deliver outstanding quality water with the added capability to withstand sanitization with hot water, eliminating the need for chemical sanitizers. The full-fit configuration minimizes stagnant areas and is optimal for applications requiring a sanitary design.
Model No.
|
Permeate Flow Rate
|
Size (Dia.× L)
|
Active Surface Area
|
Applied Pressure
|
Stabilized Salt Rejection
|
HSRO-4040-FF
|
1,900 gpd
|
7.2 m3/d
|
4”×40”
|
90 ft2
|
150 psi
|
99.5%
|
HSRO-390-FF
|
9,000 gpd
|
34.1 m3/d
|
8”×40”
|
390 ft2
|
150 psi
|
99.5%
|
Permeate flow and salt rejection based on the following test conditions: 2,000 ppm NaCl, pressure specified above, 77°F (25°C) and 15% recovery. Elements must be conditioned prior to start-up. A one-time flux loss will occur during stabilization. Listed values apply after performance stabilization. Permeate flows for individual elements may vary +/-20%.