HL Alto TDS (300 - 9000 GPD)

Información de pedidos para sistemas de ósmosis inversa comerciales de alto TDS de la serie HL

Notas y voltaje/Información de pedidos

• Todas las dimensiones y pesos son aproximados.
• Base de capacidad: 24 hrs/día
• Sistemas clasificados a: 77 °F (25 °C) que utilizan una solución de cloruro de sodio de 1000 a 5000 ppm que opera a una presión aproximada de 200 a 225 psi.
• Presión mínima de alimentación al sistema de ósmosis inversa: 40-60 PSI. La capacidad del sistema varía significativamente con la temperatura del agua.
• El cloro debe eliminarse con un filtro de carbón antes del sistema de ósmosis inversa, si está presente en el agua de alimentación.
• Se debe añadir un pretratamiento para la dureza del agua mediante una inyección de suavizante o antiincrustante para evitar la formación de incrustaciones en las membranas.
• Turbidez del agua de alimentación: Inferior a 1 NTU; Índice de densidad de sedimentos (IDS) del agua de alimentación: Máximo 3. Si se excede, se recomienda pretratar con un filtro de medios. Todos los equipos de pretratamiento y kits de prueba de IDS están disponibles en Applied Membranes.
• Voltaje: agregue nuestros códigos de voltaje al final del número de modelo al realizar el pedido.
  Ejemplo: HL-12521-116 = 110v, 1 fase, 60 hz.

• Solución compacta, económica y ampliable para agua de alimentación con mayor TDS
• Más de 40 años de experiencia se reflejan en nuestra calidad
• Marco compacto, resistente y recubierto de polvo
• Componentes probados utilizados en todo el sistema
• Diseñado de forma conservadora para un rendimiento confiable a largo plazo
• Probado en fábrica para garantizar un funcionamiento sin problemas.

Standard Equipment

Microprocessor Controller for Automatic Operation

Monitors and/or Controls:

• Inlet Valve
• Delayed Start-Up of High Pressure Pump
• Feed Water Flush at System Shut-Down
• Low Pressure Switch
• ON/OFF with Tank Level
• Permeate Water Quality (TDS)
• Pre-treatment Backwash/Lockout

Controller Features:

• Backlit LED Display
• LED Indicator for System Status/Alarm
• Front Panel Access for TDS Sensor Calibration
• LED Indicator for Water Quality (TDS)
• Start-Up & Shut-Down with Tank Level
• Feed Flush at Shut-Down
• Low Pressure Shut-Down
• Low Pressure Automatic Restart
• Delayed Start-Up of High Pressure Pump

LED Display:

• Permeate TDS
• Operating Status
• Alarm Condition

I-ROC150S

UL Listing Optional

Optional Add-On Parts and Equipment for Commercial RO Systems

AMI's HL Series High TDS RO Systems are available with a wide variety of optional add-on equipment. All assemblies include hardware and mounting equipment for easy upgrade to your new or existing system installation.

Wall Mount Filter Cartridges

Includes mounting bracket and Isolation Valves to close the line when changing the filter cartridge.

Part # A711

Filter cartridge must be ordered separately - common options are shown below. Any 20" Big Blue size cartridge can be installed. Click here to view our complete filter cartridge product selection.

Pretreatment Options Available:

• Sediment Filters in a variety of micron ratings -
• 1 Micron: H-F20BB01CF
• 5 Micron H-F20BB05CF
• 10 Micron: H-F20BB10CF
• 30 Micron: 155430-43
• 75/25 Micron Dual Rated: 155356-43
• 100 Micron: 355226-43

• Scale Inhibitor Cartridges: H-F4220-NS

• Block Carbon Filter Cartridges Block Carbon filter cartridges produce no carbon fines.
• KX Brand: 32-425-125-20. Click for Product Details

Post-treatment Options Available:

• Calcite Filter Cartridge to neutralize the pH of the RO permeate water - Filter Model H-F4220CALCITE Click for Product Details

• DI Filter Cartridge with Mixed-Bed Deionization Resin for ultrapure applications - Filter Model: H-F4220DI Click for Product Details

Softeners & Media Filtration Pre/Post Treatment

AMI Media filters feature fully automatic backwash or regeneration for easy, trouble free maintenance. Ensure superior system operation and extended membrane life by providing proper pretreatment to the incoming feed water on a continuous basis. Common pretreatment or post-treatment methods include:

• Single or Twin Water Softener to remove hardness and scale.
• Multi-Media Filter for sediment filtration to approximately 10 microns.
• Carbon Filter to remove chlorine.
• Calcite Filter to neutralize the pH of the RO product water.

Click Here to visit the Media Filtration section of our site for detailed information on the full line of media filtration products we carry.

Chemical Injection System

Antiscalant injection as an alternative to a water softener for scale control, or

Sodium Metabisulfite injection as an alternative to a carbon filter to remove chlorine.

Water Quality Monitors

Pre-packaged wall-mountable water quality monitoring controls allow you to monitor the quality of the incoming feed or RO product water. Assembly includes the monitor, enclosure and sensor.

Available Options for Monitoring Incoming Feed Water Quality:

• ORP - 60Hz Part # A246, 50Hz Part # A247
• pH - 60Hz Part # A244, 50Hz Part # A245

Available Options for Monitoring RO Product Water Quality:

• Total Dissolved Solids (TDS) - 60Hz Part # A242, 50Hz Part # A243
• Resistivity - 60Hz Part # A248, 50Hz Part # A249
• pH - 60Hz Part # A244, 50Hz Part # A245

Ultraviolet (UV) Systems

Add an ultraviolet water sterilizer for a 99.9% reduction of bacteria and viruses in the feed and/or permeate line.

Note: For feed line, wall-mount filter cartridge assembly shown above is required.

Tank Pressure Controls

To automatically turn the RO system on or off with the permeate storage tank level. For use with a pressurized storage tank (sold separately).

• 220v/60Hz - Part # A621

Pressurized Storage Tank

Pressurized permeate storage tank available in 40 or 80 gallon volume. Assembly includes tank, valve, piping, tubing, and pressure gauge.

• 40 Gallon Tank Assembly - Part # A612-40
• 80 Gallon Tank Assembly - Part # A612-80

Tank Level Controls

Turns system on or off according to the water level in an atmospheric storage tank.

• Dual float assembly provides system on/off controls.
  Part # YFL2PPAS
• Triple float assembly provides system on/off as well as low level protection on/off for a repressurization pump.
  Part # YFL3PPAS

Atmospheric storage tank and repressurization pump are sold separately.

Atmospheric Storage Tank

Atmospheric Permeate Storage tank. Assembly includes bulkheads and vent filter. For use with Tank Level Controls (sold separately).

• 200 Gallon Part # A613-200
• 400 Gallon Part # A613-500

Delivery System

20 GPM, 50 PSI, 220v/1ph/50-60Hz

Includes Pump, 40 Gallon Pressure Tank, Controls and Fittings

Part # A606-216

Prefilter Pressure Gauge

To allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.

Part # A623

Floor Casters Kit

2 Locking casters and 2 Swivel casters to mount at the base of the stand for ease of system mobility.

Part #: A625

Replacement Parts & Consumables for HL Series Reverse Osmosis Systems

• Replacement Reverse Osmosis Membranes for Commercial RO Systems
• Replacement Membrane Pressure Vessels for Commercial RO Systems
• Replacement Sediment Filters for Commercial RO Systems
• Replacement Carbon Filters for Commercial RO Systems
• Replacement Filter Housings for Commercial RO Systems
• Replacement Components for Commercial RO Systems
• Membrane Cleaning Cartridges for Commercial RO Systems

• Folleto del sistema de ósmosis inversa comercial pequeño de alto TDS serie HL
• Catálogo de sistemas de tratamiento de agua por membrana AMI
• ¿Qué es la ósmosis inversa? (Sobre la ósmosis inversa - Artículo técnico)