Ir a contenido

AMI Small Commercial Reverse Osmosis Systems

  • 300 a 19.000 galones/día
  • Para agua de alimentación TDS de 500 a 1000 PPM

Diseñados para producir agua con bajo contenido de sólidos disueltos a partir de agua del grifo o de pozo, estos pequeños sistemas comerciales de ósmosis inversa utilizan membranas de ósmosis inversa de alta eficiencia. Pertenecientes a la familia de la serie L (también se incluyen las series XL y HL), estos sistemas de ósmosis inversa están diseñados para funcionar a presiones de 200-250 psi para agua con mayor contenido de sólidos disueltos totales (TDS) y utilizan membranas de ósmosis inversa TW. Las membranas de ósmosis inversa TW ofrecen una mayor eliminación de sales y la mayor presión de operación compensa la pérdida de flujo de la membrana debido al mayor nivel de TDS.

Los sistemas de ósmosis inversa de la Serie L de AMI utilizan componentes probados y fiables, montados sobre una robusta estructura metálica con recubrimiento en polvo. Nuestros sistemas de filtración de agua incorporan numerosos detalles de diseño, fruto de años de experiencia. Nuestro diseño de procesos y fluidos garantiza una vida útil óptima de la membrana y minimiza su ensuciamiento.

Imagen de la serie L

Información para pedidos de sistemas comerciales de ósmosis inversa de la serie L

Modelo del sistema RO No.

Capacidad del sistema de ósmosis inversa

Elementos de membrana de ósmosis inversa

Tamaños de línea
(NPT, pulgadas)

Dimensiones del sistema de ósmosis inversa
(pulgadas/cm)

Peso aproximado del envío
(libras/kilogramo)

GPD

m³/día

Cantidad.

Tamaño
(Diámetro × Largo)

Entrada

Permanente.

Concentración.

Longitud

Profundidad

Altura

L-12521A

300

1

1

2,5” × 21”

¾”

⅜”

⅜”

20/51

24/61

55/140

230/104

L-125A

600

2

1

2,5” × 40”

¾”

⅜”

⅜”

20/51

24/61

55/140

240/109

L-225A

1.200

5

2

2,5” × 40”

¾”

⅜”

⅜”

20/51

24/61

55/140

250/113

L-14A

1.800

7

1

4” × 40”

¾”

½”

½”

20/51

24/61

55/140

275/125

L-24A

3.000

12

2

4” × 40”

¾”

½”

½”

20/51

24/61

55/140

300/136

L-34A

5.500

21

3

4” × 40”

¾”

½”

½”

20/51

32/82

55/140

325/147

L-44A

7.000

27

4

4” × 40”

¾”

½”

½”

20/51

32/82

55/140

350/159

L-54A

8.500

32

5

4” × 40”

¾”

½”

½”

20/51

32/82

55/140

375/170

L-64A

10.000

38

6

4” × 40”

¾”

½”

½”

20/51

32/82

55/140

400/181

L-74A

11.500

44

7

4” × 40”

¾”

½”

½”

20/51

40/102

55/140

441/200

L-84A

13.000

49

8

4” × 40”

¾”

½”

½”

20/51

40/102

55/140

466/211

L-94A

14.400

55

9

4” × 40”

¾”

½”

½”

20/51

40/102

55/140

491/223

L-104A

16.000

60

10

4” × 40”

¾”

½”

½”

20/51

46/117

55/140

516/234

L-114A

17.300

66

11

4” × 40”

¾”

½”

½”

20/51

46/117

55/140

541/245

L-124A

19.000

72

12

4” × 40”

¾”

½”

½”

20/51

46/117

55/140

566/257

Notas y voltaje/Información de pedidos

  • Equipo de pretratamiento recomendado: Todos los equipos de pretratamiento y los kits de prueba SDI están disponibles en Applied Membranes.
    • Filtro de carbón: El cloro debe eliminarse con un filtro de carbón antes del sistema de ósmosis inversa, si está presente en el agua de alimentación.
    • Ablandador de agua: La dureza debe eliminarse si está presente en el agua de alimentación antes de la ósmosis inversa para evitar la formación de incrustaciones en las membranas.
    • Filtro multimedia : si el agua de alimentación supera la turbidez <1 NTU o el índice de densidad de sedimentos (SDI) de 3, se recomienda un pretratamiento con filtro multimedia.
  • Base de capacidad: 24 hrs/día
  • Sistemas clasificados a: 25 °C (77 °F) con solución de cloruro de sodio de 1000 ppm y una presión aproximada de 14 kg/cm² (200 psi). Para agua de alimentación con mayor TDS, consulte nuestro folleto de la Serie HL.
  • Presión mínima de alimentación al sistema de ósmosis inversa: 40-60 PSI. La capacidad del sistema varía significativamente con la temperatura del agua.
  • Todas las dimensiones y pesos son aproximados.
  • Voltaje: Al realizar su pedido, añada nuestros códigos de voltaje al final del número de modelo. Ejemplo: L- 12521-116 = 110 V, monofásico, 60 Hz.

Voltajes disponibles:

Código de voltaje

Voltaje

L-12521A

L-125A

L-225A

L-14A

L-24A

L-34A

L-44A

L-54A

116

120 V/monofásico/60 Hz

--

--

--

216

220-240 V/monofásico/60 Hz

215

220-240 V/monofásico/50 Hz

236

240 V/trifásico/60 Hz

--

--

--

--

--

235

240 V/trifásico/50 Hz

--

--

--

--

--

436

460 V/trifásico/60 Hz

--

--

--

--

--

Código de voltaje

L-64A

L-74A

L-84A

L-94A

L-104A

L-114A

L-124A

116

120 V/monofásico/60 Hz

--

--

--

--

--

--

--

216

220-240 V/monofásico/60 Hz

215

220-240 V/monofásico/50 Hz

236

240 V/trifásico/60 Hz

235

240 V/trifásico/50 Hz

436

460 V/trifásico/60 Hz
  • Más de 40 años de experiencia se reflejan en nuestra calidad
  • Marco compacto, resistente y recubierto de polvo
  • Componentes probados utilizados en todo el sistema
  • Diseñado de forma conservadora para un rendimiento confiable a largo plazo
  • Probado en fábrica para garantizar un funcionamiento sin problemas.

Standard Equipment

  • Thin Film Composite RO Membranes
  • Stainless Steel RO Membrane Pressure Vessels
  • 5 Micron 20” Cartridge Filter & Housing
  • Feed Water Temperature Gauge
  • Automatic Inlet Feed Solenoid Valve
  • Permeate, Concentrate & Recycle Flowmeters
  • RO System Control Valve
  • Recycle Control Valve
  • Low Pressure Pump Protection
  • High Pressure RO Pump
    • L-12521 – L-24A: Brass Rotary Vane
    • L-34A – L-124A : SS multistage with throttling valve
  • Automatic Membrane Flush
  • 4) Liquid Filled Pressure Gauges for Filter IN/OUT and RO System Pressures
  • Product TDS Displayed on Controller LED
  • RO System ON/OFF with 2-Level Tank Floats
  • Powder Coated Carbon Steel Frame
  • Boxed and Palletized for Shipment

Microprocessor Controller for Automatic Operation

Monitors and/or Controls:

  • Inlet valve
  • Delayed start-up of high pressure pump
  • Feed water flush at system shut-down
  • Low pressure switch
  • On/Off with tank level
  • Permeate Water Quality (TDS)
  • Pre-treatment backwash/lockout

 

Controller Features:

  • Backlit LED Display
  • LED indicator light for system status/alarm
  • Front panel access port for calibration of TDS sensor
  • LED indicator light for water quality (TDS)
  • Start-up and shut-down with tank level
  • Feed flush at shut-down
  • Low pressure shut-down
  • Low pressure automatic restart
  • Delayed start-up of high pressure pump

Commercial Reverse Osmosis Water Filtration RO System Controller

I-ROC300 Controller for Automatic Operation

 

LED Display:

  • Permeate TDS
  • Operating Status
  • Alarm Condition
  • Spot Free Rinse/Car Wash
  • Water Stores
  • Whole House
  • Laboratories
  • Large Office
  • Institutions
  • Ice Makers
  • Humidification
  • Misting
  • Commercial
  • Manufacturing
  • Rinse Water and a wide variety of other applications

Commercial

Optional Add-On Parts and Equipment for Commercial RO Systems

AMI's L Series RO Systems are available with a wide variety of optional add-on equipment. All assemblies include hardware and mounting equipment for easy upgrade to your new or existing system installation.

Wall Mount Filter Cartridges

Wall Mount Prefilter for Commercial RO Systems

Includes mounting bracket and Isolation Valves to close the line when changing the filter cartridge.

Part # A711

Filter cartridge must be ordered separately - common options are shown below. Any 20" Big Blue size cartridge can be installed. Click here to view our complete filter cartridge product selection.

 

Filter Cartridges for Commercial RO Systems Pretreatment Options Available:

  • Block Carbon Filter Cartridges Block Carbon filter cartridges produce no carbon fines.

Post-treatment Options Available:

  • Calcite Filter Cartridge to neutralize the pH of the RO permeate water - Filter Model H-F4220CALCITE Click for Product Details
  • DI Filter Cartridge with Mixed-Bed Deionization Resin for ultrapure applications - Filter Model: H-F4220DI Click for Product Details

 

Softeners & Media Filtration Pre/Post Treatment

Water Softener and Media Filter for Commercial RO Systems AMI Media filters feature fully automatic backwash or regeneration for easy, trouble free maintenance. Ensure superior system operation and extended membrane life by providing proper pretreatment to the incoming feed water on a continuous basis. Common pretreatment or post-treatment methods include:

  • Single or Twin Water Softener to remove hardness and scale.
  • Multi-Media Filter for sediment filtration to approximately 10 microns.
  • Carbon Filter to remove chlorine.
  • Calcite Filter to neutralize the pH of the RO product water.

Click Here to visit the Media Filtration section of our site for detailed information on the full line of media filtration products we carry.

 

Chemical Injection System

Mineral Injection System for RO System Post-treatment Antiscalant injection as an alternative to a water softener for scale control, or

Sodium Metabisulfite injection as an alternative to a carbon filter to remove chlorine.

 

Water Quality Monitors

Water Quality Monitor for Commercial RO SystemsPre-packaged wall-mountable water quality monitoring controls allow you to monitor the quality of the incoming feed or RO product water. Assembly includes the monitor, enclosure and sensor.

Available Options for Monitoring Incoming Feed Water Quality:

  • ORP - 60Hz Part # A246, 50Hz Part # A247
  • pH - 60Hz Part # A244, 50Hz Part # A245

Available Options for Monitoring RO Product Water Quality:

  • Total Dissolved Solids (TDS) - 60Hz Part # A242, 50Hz Part # A243
  • Resistivity - 60Hz Part # A248, 50Hz Part # A249
  • pH - 60Hz Part # A244, 50Hz Part # A245

 

Ultraviolet (UV) Systems

Ultraviolet Disinfection for Commercial RO Systems Add an ultraviolet water sterilizer for a 99.9% reduction of bacteria and viruses in the feed and/or permeate line.

Note: For feed line, wall-mount filter cartridge assembly shown above is required.

 

Tank Pressure Controls

Tank Pressure Controls for Commercial RO Systems To automatically turn the RO system on or off with the permeate storage tank level. For use with a pressurized storage tank (sold separately).

  • 220v/60Hz - Part # A621

 

Pressurized Storage Tank

Pressurized Storage Tank for Commercial RO SystemsPressurized permeate storage tank available in 40 or 80 gallon volume. Assembly includes tank, valve, piping, tubing, and pressure gauge.

  • 40 Gallon Tank Assembly - Part # A612-40
  • 80 Gallon Tank Assembly - Part # A612-80

 

Tank Level Controls

Tank Level Controls for Commercial RO SystemsTurns system on or off according to the water level in an atmospheric storage tank.

  • Dual float assembly provides system on/off controls.
    Part # YFL2PPAS
  • Triple float assembly provides system on/off as well as low level protection on/off for a repressurization pump.
    Part # YFL3PPAS

Atmospheric storage tank and repressurization pump are sold separately.

 

Atmospheric Storage Tank

Atmospheric Storage Tank for Commercial ROAtmospheric Permeate Storage tank. Assembly includes bulkheads and vent filter. For use with Tank Level Controls (sold separately).

  • 200 Gallon Part # A613-200
  • 400 Gallon Part # A613-500

 

Delivery System

20 GPM, 50 PSI, 220v/1ph/50-60Hz

Includes Pump, 40 Gallon Pressure Tank, Controls and Fittings

Part # A606-216

 

Prefilter Pressure Gauge

Prefilter Differential Pressure Gauge for Commercial ROTo allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.

Part # A623

 

 

Replacement Parts & Consumables for HL Series Reverse Osmosis Systems