Ir a contenido

Serie de montaje en pared

Sistemas de ósmosis inversa de montaje en pared serie WM

AMI Wall Mount Reverse Osmosis System

Diseñados para producir agua con bajo contenido de sólidos disueltos a partir de agua del grifo o de pozo, los sistemas de ósmosis inversa montados en la pared de la Serie WM son compactos y eficientes, lo que los hace ideales para instalaciones que ahorran espacio.

Estos sistemas utilizan membranas de ósmosis inversa de alta eficiencia para ofrecer una purificación de agua fiable. Sus aplicaciones comunes incluyen enjuagues sin manchas en lavaderos de coches, depósitos de agua, sistemas para toda la casa, laboratorios, máquinas de hielo, humidificación, nebulización y más.

Sistema de ósmosis inversa de montaje en pared serie WM

Detalles de pedidos de sistemas de ósmosis inversa de montaje en pared de la serie WM

Modelo del sistema RO No.

Capacidad del sistema de ósmosis inversa

Elementos de membrana de ósmosis inversa

Tamaños de línea
(NPT, pulgadas)

Dimensiones del sistema de ósmosis inversa
(pulgadas/cm)

Peso aproximado del envío
(libras/kilogramo)

GPD

m³/día

Cantidad.

Tamaño
(Diámetro × Largo)

Entrada

Permanente.

Concentración.

Longitud

Profundidad

Altura

WM-12521A-116

250

0.9

1

2,5 × 21

½

¼

27/69

28/11

27/69

90/41

WM-22521A-116

500

1.9

2

2,5 × 21

½

¼

27/69

28/11

27/69

96/44

WM-32521A-116

750

2.6

3

2,5 × 21

½

¼

34/86

28/11

27/69

106/48

WM-42521A-116

1.000

3.8

4

2,5 × 21

½

¼

34/86

28/11

27/69

118/54

WM-225A-116

1.200

4.5

2

2,5 × 40

½

½

¼

27/69

28/11

46/117

116/53

WM-325A-116

1.700

6.4

3

2,5 × 40

½

½

¼

34/86

28/11

46/117

136/62

WM-425A-116

2.200

8.3

4

2,5 × 40

½

½

¼

34/86

28/11

46/117

152/69

WM-24A-116

4.000

15.1

2

4.0 × 40

½

½

½

34/86

30/12

52/132

175/79

Notas y voltaje/Información de pedidos

  • Todas las dimensiones y pesos son aproximados.
  • Base de capacidad: 24 hrs/día
  • Sistemas clasificados a: 77 °F (25 °C) que utilizan una solución de cloruro de sodio de 1000 ppm que opera a una presión aproximada de 175 psi.
  • Presión mínima de alimentación al sistema de ósmosis inversa: 40 PSI. La capacidad del sistema varía significativamente con la temperatura del agua.
  • El cloro debe eliminarse con un filtro de carbón antes del sistema de ósmosis inversa, si está presente en el agua de alimentación.
  • Se debe añadir un pretratamiento para la dureza del agua mediante una inyección de suavizante o antiincrustante para evitar la formación de incrustaciones en las membranas.
  • Turbidez del agua de alimentación: Inferior a 1 NTU; Índice de densidad de sedimentos (IDS) del agua de alimentación: Máximo 3. Si se excede, se recomienda pretratar con un filtro de medios. Todos los equipos de pretratamiento y kits de prueba de IDS están disponibles en Applied Membranes.

Voltaje : Los modelos anteriores indican los códigos de voltaje recomendados por modelo. Voltajes disponibles:
116 = 120 V/monofásica/60 Hz • 215 = 220 V/monofásica/50 Hz.
216 = 220 o 230 V/1 fase/60 Hz • Trifásico no disponible.

  • The convenient, space efficient wall mountable RO systems are substantially lower in cost than frame-mounted RO systems, and are more cost-effective to ship.
  • WM Series reverse osmosis systems are expandable to allow for quick, easy and cost effective upgrades to systems in the field. Simply purchase and install the appropriate expansion kit assembly to increase your RO system capacity at any time down the road.
  • These reverse osmosis systems use the proven, reliable components and are mounted on a sturdy powder-coated metal mounting backplate. There are numerous design details learned from years of experience that are incorporated in our water filtration systems. Our process and fluid design ensures an optimum membrane life and minimizes the membrane fouling.
  • Over 40 years of experience is reflected in our quality
  • Compact, heavy-duty, powder coated frame
  • Proven components used throughout the system
  • Conservatively engineered for reliable, long term performance
  • Factory tested to ensure trouble-free operation
  • Made in USA

AMI Wall Mount Reverse Osmosis Systems

Standard Equipment

Controller for Automatic Operation

  • Thin Film Composite RO Membranes
  • PVC RO membrane pressure vessels
  • 5 micron cartridge filter & housing
  • Automatic inlet feed solenoid valve
  • System control valve
  • Recycle control valve
  • Low pressure pump protection
  • Rotary vane high pressure RO pump
  • Liquid filled system pressure gauge
  • Powder coated carbon steel frame
  • Boxed and palletized for shipment

Controller Features:

  • Panel mounted on/off switch

Monitors and/or Controls:

  • Inlet valve
  • Low pressure switch
  • Low pressure auto restart after 1 hour
  • Feed water flush at system shut-down
  • On/Off with tank level
  • Pre-treatment backwash/lockout
  • System On/Off according to Tank Level (Float purchase separately)

Indicator Lights:

  • Service run/system flush
  • Storage tank full/pretreatment lockout
  • Low pressure shutdown/auto restart

 

AMI Wall Mount Reverse Osmosis System Controller

PLC based controller

  • Spot free rinse
  • Water stores
  • Whole house
  • Laboratories
  • Light commercial
  • Institutions
  • Rinse Water
  • Ice makers
  • Humidification
  • Misting
  • And a wide variety of other applications

 

Reverse Osmosis Systems for Carwash Spot-Free Rinse

Optional Add-On Parts and Equipment for Wall Mount RO Systems

AMI's WM Series Wall Mount RO Systems are available with a wide variety of optional add-on accessories. All assemblies include hardware and mounting equipment for easy upgrade to your new or existing system installation.

Wall Mount Prefilter for Wall Mount RO SystemsWall Mount Filter Cartridges

Includes mounting bracket and Isolation Valves to close the line when changing the filter cartridge.

Part # A711

Filter cartridge must be ordered separately - common options are shown below. Any 20" Big Blue size cartridge can be installed. Click here to view our complete filter cartridge product selection.

 

Filter Cartridges for Wall Mount RO Systems Pretreatment Options Available:

  • Block Carbon Filter Cartridges Block Carbon filter cartridges produce no carbon fines.

Post-treatment Options Available:

  • Calcite Filter Cartridge to neutralize the pH of the RO permeate water - Filter Model H-F4220CALCITE Click for Product Details
  • DI Filter Cartridge with Mixed-Bed Deionization Resin for ultrapure applications - Filter Model: H-F4220DI Click for Product Details

 

Softeners & Media Filtration Pre/Post Treatment

Water Softener and Media Filter for Wall Mount RO Systems AMI Media filters feature fully automatic backwash or regeneration for easy, trouble free maintenance. Ensure superior system operation and extended membrane life by providing proper pretreatment to the incoming feed water on a continuous basis. Common pretreatment or post-treatment methods include:

  • Single or Twin Water Softener to remove hardness and scale.
  • Multi-Media Filter for sediment filtration to approximately 10 microns.
  • Carbon Filter to remove chlorine.
  • Calcite Filter to neutralize the pH of the RO product water.

Click Here to visit the Media Filtration section of our site for detailed information on the full line of media filtration products we carry.

 

Mounting Bracket (recommended)

Mounting Bracket for Wall Mount RO SystemsScrew the mounting bracket to the wall first to simplify the mounting of the RO unit. Includes powder coated mounting plate with screws.

  • Part # A616 - for 27"L Units
  • Part # A615 - for 34"L Units

 

Water Quality Monitors

Water Quality Monitor for Wall Mount RO SystemsPre-packaged wall-mountable water quality monitoring controls allow you to monitor the quality of the incoming feed or RO product water. Assembly includes the monitor, enclosure and sensor.

Available Options for Monitoring Incoming Feed Water Quality:

  • ORP - 60Hz Part # A246, 50Hz Part # A247
  • pH - 60Hz Part # A244, 50Hz Part # A245

Available Options for Monitoring RO Product Water Quality:

  • Total Dissolved Solids (TDS) - 60Hz Part # A242, 50Hz Part # A243
  • Resistivity - 60Hz Part # A248, 50Hz Part # A249
  • pH - 60Hz Part # A244, 50Hz Part # A245

 

Floor Stand

Stand for Wall Mount RO SystemsUse this free-standing carbon steel powder coated frame to convert the WM unit to a floor unit.
Part # A626

Optional: Floor Stand Casters Kit
2 Locking & 2 Swivel for ease of mobility.
Part # A625

 

Ultraviolet (UV) Systems

Ultraviolet Disinfection for Wall Mount RO Systems Add an ultraviolet water sterilizer for a 99.9% reduction of bacteria and viruses in the feed and/or permeate line.

Note: For feed line, wall-mount filter cartridge assembly shown above is required.

 

Tank Pressure Controls

Tank Pressure Controls for Wall Mount RO Systems To automatically turn the RO system on or off with the permeate storage tank level. For use with a pressurized storage tank (sold separately).

  • 220v/60Hz - Part # A621

 

Pressurized Storage Tank

Pressurized Storage Tank for Wall Mount RO SystemsPressurized permeate storage tank available in 40 or 80 gallon volume. Assembly includes tank, valve, piping, tubing, and pressure gauge.

  • 40 Gallon Tank Assembly - Part # A612-40
  • 80 Gallon Tank Assembly - Part # A612-80

 

Tank Level Controls

Tank Level Controls for Wall Mount RO SystemsTurns system on or off according to the water level in an atmospheric storage tank.

  • Dual float assembly provides system on/off controls.
    Part # YFL2PPAS
  • Triple float assembly provides system on/off as well as low level protection on/off for a repressurization pump.
    Part # YFL3PPAS

Atmospheric storage tank and repressurization pump are sold separately.

 

Prefilter Pressure Gauge

Pressure Gauge for Wall Mount RO SystemsTo allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.

  • Part # A623

 

Flowmeters

Flowmeter for Wall Mount RO SystemsMonitor system flows. Includes mounting bracket and fittings for connection of system tubing.

  • 1-10 GPM Part # A107
  • 0.5-5 GPM Part # A109

To allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.

 

Replacement Parts & Consumables for WM Series Reverse Osmosis Systems