Stainless Steel Membrane Housing Pressure Vessels enhance system appearance and allow you to take full advantage of the membrane capability. Safer and more reliable than PVC membrane pressure vessels. This style is designed for direct connection to AMI/Applied Membranes and FilmTec/DOW style elements. The AMI 2” Stainless Steel pressure vessels are ideal for pressures up to 300 PSI.
|
Configuration |
|
Specifications |
|
Model No. |
For Membranes |
Vessel Dimensions |
Connection, FNPT |
||||||||
|
Diameter |
Length |
Diameter |
Length |
Feed |
Brine |
Prod. |
|||||
|
in |
cm |
in |
cm |
In |
cm |
In |
cm |
||||
|
PV2013SSAU-316 |
2.0 |
5.1 |
13 |
33.0 |
2.0 |
5.0 |
14.5 |
36.8 |
⅛” |
⅛” |
⅛” |
|
PV2026SSAU-316 |
2.0 |
5.1 |
26 |
66.0 |
2.0 |
5.0 |
28 |
71.1 |
⅛” |
⅛” |
⅛” |
Note: Vessels sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and Straps not included.
|
|
|
Model No. |
Description |
Qty. per Vessel |
|
|
PV-EP20SSU2 |
End Plug with O-Rings |
2 |
|
|
PV-RR20U |
U-Pin |
2 |
|
|
PV-OR20-326 |
O-Ring for End Plug |
4 |
|
|
3850.001 |
Feed plug, 1/8” for feed end |
1 |
Molykote 111 compound is the recommended o-ring lubricant for use in water filters and water treatment systems including reverse osmosis membranes & pressure vessels, and filter housings. The high gade silicone lubricant does not harm the membrane or downstream equipment typically used in reverse osmosis and water treatment systems.
| Model No. | Description | Image |
| H-C111DC | Molykote Compound 111 - 5 Ounce Tube |  |
| H-C111DC-6GM | Molykote Compound 111 - 6 Gram Pillow Pack Sold individually, or in boxes of 100 at bulk pricing |
Note: Membrane max. pressures and operating conditions vary - refer to membrane specifications for data on specific models
| Membrane Type | PV2013SSAU-316 (2 x 13") | PV2026ASSAU-316 (2" x 26") |
| Thin Film RO Membranes | M-T2013A | M-T2026A |
| Low Energy RO Membranes | M-T2013ALE | M-T2026ALE |
| Extra-Low Energy RO Membranes | M-T2013AXLE | M-T2026AXLE |
