HR Series - High Rejection Low Pressure Thin Film Koch Membrane Elements
Obsolete Membrane Model |
Recommended Replacement |
Specifications for Obsolete Models - For Reference Only |
Size |
Permeate Flow |
Chloride Rejection |
Membrane Area |
Feed Spacer |
(Dia." x L") |
GPD |
m³/d |
(ft²) |
(m²) |
2540HR |
M-T2540A |
2.5×40 |
750 |
2.8 |
99.40 |
27 |
2.5 |
31 mil |
4040-HR-T |
M-T4040A |
4×40 |
2,270 |
8.6 |
99.55 |
85 |
7.9 |
28 mil |
4040-HR |
M-B4040A |
4×40 |
2,270 |
8.6 |
99.55 |
85 |
7.9 |
28 mil |
8040-HR-375 |
FILMTEC BW30-365 |
8×40 |
10,200 |
38.6 |
99.50 |
375 |
34.8 |
31 mil |
8040-HR-400 |
FILMTEC BW30-400 |
8×40 |
11,000 |
41.6 |
99.50 |
400 |
37.2 |
28 mil |
8040-HR-400-34 |
FILMTEC BW30-400 |
8×40 |
11,000 |
41.6 |
99.55 |
400 |
37.2 |
34 mil |
8040-HR-440-28 |
FILMTEC BW30HR-440 |
8×40 |
12,100 |
45.8 |
99.55 |
440 |
40.9 |
28 mil |
Test Conditions: 2,000 mg/l NaCl (700mg/l for 2.5”) solution at 225 psi (1,550 kPa) applied pressure, 15% recovery, 77°F (25°C) and pH 7.5 2540HR & 4040-HR-T are tape-wrapped elements. 4040-HR and 8” elements are fiberglass warapped.
XR Series – High Rejection Thin Film Koch Membrane Elements
Obsolete Membrane Model |
Recommended Replacement |
Specifications for Obsolete Models - For Reference Only |
Size |
Permeate Flow |
Chloride Rejection |
Membrane Area |
Feed Spacer |
Dia." x L") |
GPD |
m³/d |
(ft²) |
(m²) |
mil |
mm |
4040-XR |
M-B4040A |
4×40 |
2,200 |
8.3 |
99.75 |
85 |
7.9 |
28 |
0.7 |
8040-XR-375 |
FILMTEC BW30XFR-400/34i |
8×40 |
9,800 |
37.1 |
99.75 |
375 |
34.8 |
31 |
0.8 |
8040-XR-400 |
FILMTEC BW30HR-440i |
8×40 |
10,500 |
39.7 |
99.75 |
400 |
400 |
28 |
0.7 |
Test Conditions: 2,000 mg/l NaCl solution at 325 psi (2,240 kPa) applied pressure, 15% recovery, 77°F (25°C) and pH 7.5. Fiberglass Wrapped.
ROGA Series – Chlorine Resistant High Rejection Cellulose Acetate Koch Membrane Elements
Obsolete Membrane Model |
Recommended Replacement |
Specifications for Obsolete Models - For Reference Only |
Size |
Permeate Flow |
Chloride Rejection |
Membrane Area |
Feed Spacer |
Dia." x L") |
GPD |
m³/d |
(ft²) |
(m²) |
mil |
mm |
ROGA-4040-HR |
M-CB4040AD |
4×40 |
1,700 |
6.4 |
98.0 |
80 |
7.4 |
31 |
0.8 |
ROGA-8040-HR-325 |
No Available Replacement |
8×40 |
7,100 |
26.9 |
98.0 |
325 |
30.2 |
31 |
0.8 |
Test Conditions: 2,000 mg/l NaCl solution at 420 psi (2,900 kPa) applied pressure, 15% recovery, 77°F (25°C) and pH 5.7 Fiberglass Wrapped.
SW Series – Koch Seawater RO Membrane Elements (SWRO)
Obsolete Membrane Model |
Recommended Replacement |
Specifications for Obsolete Models - For Reference Only |
Size |
Permeate Flow |
Chloride Rejection |
Membrane Area |
Feed Spacer |
Dia." x L") |
GPD |
m³/d |
(ft²) |
(m²) |
mil |
mm |
2540-SW |
M-S2540A |
2.5×40 |
520 |
2.0 |
99.50 |
25 |
2.3 |
31 |
0.8 |
2540SWHF |
M-S2540A |
2.5×40 |
700 |
2.6 |
99.50 |
25 |
2.3 |
31 |
0.8 |
4040-SW |
M-S4040A |
4×40 |
1,330 |
5.0 |
99.75 |
74 |
6.9 |
31 |
0.8 |
8040-SW-335 |
FILMTEC SW30HRLE-370/34i |
8×40 |
6,000 |
22.7 |
99.75 |
335 |
31.1 |
34 |
0.9 |
8040-SW-400 |
FILMTEC SW30HRLE-400 |
8×40 |
7,200 |
27.2 |
99.75 |
400 |
37.2 |
28 |
0.9 |
Test Conditions: 32,800 mg/l NaCl solution (isosmotic to ASTM standard seawater) at 800 psi (5,520 kPa) applied pressure, 7% recovery, 77°F (25°C) and pH 7.5