2.5英寸U型针不锈钢
不锈钢膜壳压力容器不仅提升了系统外观，还能让您充分利用膜的性能。比 PVC 膜压力容器更安全可靠。该型号设计用于直接连接 AMI/Applied Membranes 和 FilmTec/DOW 型膜元件。AMI 2.5 英寸不锈钢压力容器是高达 300 PSI 压力的理想选择。
不锈钢压力容器订购信息
|
配置
|
规格
|
|
型号 |
对于膜 |
容器尺寸 |
连接，FNPT |
||||||||
|
直径 |
长度 |
直径 |
长度 |
喂养 |
盐水 |
产品 |
|||||
|
在 |
厘米 |
在 |
厘米 |
在 |
厘米 |
在 |
厘米 |
||||
|
PV2514SSAU-316 |
2.5 |
6.4 |
14 |
35.6 |
2.5 |
6.4 |
16 |
40.6 |
¼英寸 |
¼英寸 |
¼英寸 |
|
PV2521SSAU-316 |
2.5 |
6.4 |
21 |
53.3 |
2.5 |
6.4 |
22.5 |
57.2 |
¼英寸 |
¼英寸 |
¼英寸 |
|
PV2540SSAU-316 |
2.5 |
6.4 |
40 |
101.6 |
2.5 |
6.4 |
四十二 |
106.7 |
¼英寸 |
¼英寸 |
¼英寸 |
注意：容器出售时配有端塞、U 型销、进料塞和 O 型圈。不包括安装垫和固定带。
SS压力容器膜外壳用于RO、UF、NF、MF系统的优势
- 可靠且经济的压力容器
- 专为易于安装和维护而设计
- 适用于高达 300 PSI 的压力
- 316 不锈钢主体、PVC 端塞、SS U 型销
- AMI 已生产水过滤组件超过 30 年
- AMI 产品以其高品质和卓越性能赢得了业界的广泛声誉
- 单独检查
RO、UF、NF、MF 系统不锈钢压力容器膜壳的特点
- 最大工作压力 300 PSI（20 Bar）
- U-Pin 风格
- 结束入口
- ¼英寸FNPT连接
- 316 不锈钢主体、PVC 端塞、不锈钢 U 型销
- 直接连接至 AMI/Applied 膜和 DOW/FilmTec 型膜
- 适用于长度为 14 英寸、21 英寸和 40 英寸的膜元件
- 易于安装和维护
不锈钢压力容器膜外壳用于容纳反渗透（RO）、超滤 水处理系统中的超滤 (UF)、纳滤 (NF) 和微滤 (MF) 膜元件 应用如：
|
|
Replacement Components for AMI Stainless Steel Membrane Housings
|
Model No. |
Description |
Qty. per Vessel |
|
|
PV-EP25GWD |
End Plug with O-Rings, 2 Ports for Product End |
1 |
|
|
PV-EP25GWS |
End Plug with O-Rings, 1 Port for Feed End |
1 |
|
|
PV-RR25U2 |
U-Pin for Securing End Cap in Place |
2 |
|
|
PV-OR40-330 |
O-Ring for End Plug (Head Seal) |
2 |
|
|
PV-OR40-210 |
O-Ring for Membrane PWT to End Plug (Internal O-Ring) |
2 |
O-Ring Lubricant for Membrane Housings(Not Included)
Molykote 111 compound is the recommended o-ring lubricant for use in water filters and water treatment systems including reverse osmosis membranes & pressure vessels, and filter housings. The high gade silicone lubricant does not harm the membrane or downstream equipment typically used in reverse osmosis and water treatment systems.
| Model No. | Description | Image |
| H-C111DC | Molykote Compound 111 - 5 Ounce Tube |  |
| H-C111DC-6GM | Molykote Compound 111 - 6 Gram Pillow Pack Sold individually, or in boxes of 100 at bulk pricing |
Popular Membranes for Use with AMI 2.5" SS Pressure Vessels (Not Included)
Note: Membrane max. pressures and operating conditions vary - refer to membrane specifications for data on specific models
| Membrane Type | PV2514SSAU-316 (2.5" x 14") | PV2521ASSAU-316 (2.5" x 21") | PV2540ASSAU-316 (2.5" x 40") |
| Thin Film RO Membranes | M-T2514A | M-T2521A | M-T2540A |
| Low Energy RO Membranes | M-T2514ALE | M-T2521ALE | M-T2540ALE |
| Extra-Low Energy RO Membranes | M-T2514AXLE | M-T2521AXLE | M-T2540AXLE |
| FRP-Wrapped RO Membranes | M-B2514A | M-B2521A | M-B2540A |
| LE FRP RO Membranes | M-B2514ALE | M-B2521ALE | M-B2540ALE |
| XLE FRP RO Membranes | M-B2514AXLE | M-B2521AXLE | M-B2540AXLE |
| Heat-Sanitizable RO Membranes | M-B2514HS | M-B2521HS | M-B2540HS |
| NF5 Nanofiltration Membranes | M-N2514A5 | M-N2521A5 | M-N2540A5 |
| NF9 Nanofiltration Membranes | M-N2514A9 | M-N2521A9 | M-N2540A9 |
| Hollow Filber UF Membranes | M-U2514HF09 | M-U2521HF09 | M-U2540HF09 |
| Polyacrylonitrile UF Membranes | M-U2514PAN | M-U2521PAN | M-U2540PAN |
| Polyethersulfone UF Membranes | M-U2514PES | M-U2521PES | M-U2540PES |
| Microfiltration Membranes | M-M2514PS20 | M-M2521PS20 | M-M2540PS20 |