4英寸PVC
美观的 4 英寸 PVC 压力容器适用于 21 英寸和 40 英寸长的膜。这款 U 型插销式压力容器设计用于直接连接 AMI/Applied Membranes 和 FILMTEC/DOW 型膜元件。AMI 4 英寸 PVC 膜壳是高达 200 PSI 压力的理想选择。
PVC压力容器膜壳订购信息
型号 |
对于膜 |
容器尺寸 |
连接,FNPT |
|||||||||
直径 |
长度 |
数量 |
直径 |
长度 |
喂养 |
盐水 |
产品 |
|||||
在 |
厘米 |
在 |
厘米 |
在 |
厘米 |
在 |
厘米 |
|||||
PV4021PWG |
4 |
10.2 |
21 |
53.3 |
1 |
4 |
10.2 |
25.75 |
65.4 |
½” |
½” |
½” |
PV4040PWG |
4 |
10.2 |
40 |
101.6 |
1 |
4 |
10.2 |
45 |
114.3 |
½” |
½” |
½” |
PV4080PWG |
4 |
10.2 |
40 |
101.6 |
2 |
4 |
10.2 |
85 |
215.9 |
½” |
½” |
½” |
注:容器整套出售,包含端塞、U 型销、进料塞和 O 型圈。不含安装垫和固定带。膜连接器单独出售。
警告: PVC 压力容器在 77°F (25°C) 温度下的最大压力为 200 psi (14 BAR)。更高的压力、更高的水温或水击会导致容器过早损坏。强烈建议在出现这些情况时安装压力开关或泄压阀以保护容器。或者,您也可以考虑使用不锈钢或玻璃钢容器。
PVC压力容器膜外壳对RO、UF、MF、NF系统的优势
- 可靠且经济的压力容器
- 专为易于安装和维护而设计
- 非常适合低压膜应用
- 由 NSF 认可的硬质 PVC、PVC 端塞、PVC 加固袖口和不锈钢袖口带制成
- AMI 已生产水过滤组件超过 30 年
- AMI 产品以其高品质和卓越性能赢得了业界的广泛声誉
- 单独检查
RO、UF、MF、NF 系统用 PVC 压力容器膜壳的特点
- 最大工作压力 200 PSI
- U 型销式端部外壳
- 结束入口
- ½ 英寸 FNPT 连接
- NSF 认证的硬质 PVC、PVC 端塞、PVC 加固袖口和不锈钢袖口带
- 直接连接至 AMI/Applied 膜和 DOW/FilmTec 型膜
- 适用于长度为 14 英寸、21 英寸和 40 英寸的膜元件
- 易于安装和维护
PVC 压力容器膜外壳用于容纳水处理系统中的反渗透 (RO)、超滤 (UF)、纳滤 (NF) 和微滤 (MF) 膜元件,其应用包括:
|
|
Spare Parts for PVC Pressure Vessel Membrane Housings
Model No. |
Description |
Qty. per Vessel |
|
PV-EP40PD1212 |
End Plug with O-Rings, ½”Brine x ½” Prod |
2 |
|
PV-EP40PD134 |
End Plug with O-Rings, ¾”Brine x ½” Prod |
2 |
|
PV-EP40PD1 |
End Plug with O-Rings, ½”Brine x ⅜” Prod |
2 |
|
PV-RR40U |
U-Pin |
2 |
|
PV-OR40-342 |
O-Ring for End Plug – External |
2 |
|
PV-OR40-210 |
O-Ring for End Plug – Internal |
2 |
|
3850.005 |
Plug for Feed End, ½” MNPT |
1 |
|
3850.003 |
Plug for Feed End, ⅜” MNPT |
1 |
O-Ring Lubricant for Membrane Housings (Not Included)
Molykote 111 compound is the recommended o-ring lubricant for use in water filters and water treatment systems including reverse osmosis membranes & pressure vessels, and filter housings. The high gade silicone lubricant does not harm the membrane or downstream equipment typically used in reverse osmosis and water treatment systems.
Model No. | Description | Image |
H-C111DC | Molykote Compound 111 - 5 Ounce Tube | ![]() |
H-C111DC-6GM | Molykote Compound 111 - 6 Gram Pillow Pack Sold individually, or in boxes of 100 at bulk pricing |
Popular Membranes for Use with AMI 4" PVC Vessels (Not Included)
Note: Membrane max. pressures and operating conditions vary - refer to membrane specifications for data on specific models
Membrane Type | PV4014PVCAU (4" x 14") | PV4021PVCAU (4" x 21") | PV4040PVCAU (4" x 40") |
Thin Film RO Membranes | M-T4014A | M-T4021A | M-T4040A |
Low Energy RO Membranes | M-T4014ALE | M-T4021ALE | M-T4040ALE |
Extra-Low Energy RO Membranes | M-T4014AXLE | M-T4021AXLE | M-T4040AXLE |
NF5 Nanofiltration Membranes | M-N4014A5 | M-N4021A5 | M-N4040A5 |
NF9 Nanofiltration Membranes | M-N4014A9 | M-N4021A9 | M-N4040A9 |
Hollow Filber UF Membranes | M-U4014HF09 | M-U4021HF09 | M-U4040HF09 |
Polyacrylonitrile UF Membranes | M-U4014PAN | M-U4021PAN | M-U4040PAN |
Polyethersulfone UF Membranes | M-U4014PES | M-U4021PES | M-U4040PES |
Microfiltration Membranes | M-M4014PS20 | M-M4021PS20 | M-M4040PS20 |
排序方式