AMI 2.5” 端端口 FRP
1200 PSI 端口海水膜壳压力容器
AMI 玻璃纤维膜壳额定压力为 1,200 psi，专为船舶应用的海水反渗透膜而设计。AMI 玻璃钢海水压力容器常用于海水淡化器，适用于船用海水淡化器、海水淡化器、陆基海水淡化器和海上海水淡化器。
AMI FRP 海水 RO 膜外壳端盖设计用于直接连接到行业标准型 2.5 英寸直径公型元件（例如 Applied Membranes, Inc. AMI 膜和 FilmTec 型膜）。
AMI 2.5" Seawater Pressure Vessels
|
Model No. |
For Membranes |
Vessel Dimensions |
Connection, FNPT |
|||
|
Outer Diameter (MAX) |
Length |
Feed |
Brine |
Prod |
||
|
PV2514A1200E |
2.5" x 14" |
3.3" |
17.5" |
¼” FNPT |
¼” FNPT |
¼” FNPT |
|
PV2521A1200E |
2.5" x 21" |
3.8" |
25" |
¼” FNPT |
¼” FNPT |
¼” FNPT |
|
PV2540A1200E |
2.5 " x 40" |
3.8" |
44" |
¼” FNPT |
¼” FNPT |
¼” FNPT |
- Maximum Operating Pressure: 1,200 PSI (68 BAR)
- Operating Temperature: 14°F-150°F
- Materials: FRP/Fiberglass Shell, Stainless Steel End Plugs, Locking Plates, and Screws
Benefits of AMI Seawater RO Membrane Housings
- Strong coated FRP/fiberglass for extended life under corrosive conditions
- Suitable for seawater conditions
- Direct connect to industry-standard 2.5" diameter seawater membrane elements
- Designed for ease of installation and maintenance
- Ideal for operating pressures up to 1,200 PSI
- AMI Products have earned an industry-wide reputation for their high quality and superior performance
- Large inventory available for immediate shipment
AMI 海水反渗透压力容器特点
- 最大压力 1200 PSI
- 末端入口/末端端口设计
- 材料：坚固的涂层 FRP/玻璃纤维，并配有机加工的双工端盖，可在腐蚀条件下延长使用寿命。
- 适用于行业标准直径 2.5 英寸、长度 14 英寸、21 英寸和 40 英寸的膜元件
- 直接连接到 AMI / FilmTec 型膜
- 易于安装和维护
AMI FRP膜壳的常见应用
- 海水淡化反渗透系统
- 净水器 RO 系统
- 膜系统工作压力高达 1,200 PSI
适用于 AMI 2.5 英寸 FRP 容器的流行膜（不包括）
注意：膜的最大压力和操作条件有所不同 - 有关具体型号的数据，请参阅膜规格
| 膜类型 | PV2514A1200E（2.5英寸 x 14英寸） | PV2521A1200E（2.5英寸 x 21英寸） | PV2540A1200E（2.5英寸 x 40英寸） |
| 海水反渗透膜 | M-S2514A | M-S2521A | M-S2540A |
| 薄膜反渗透膜 | M-T2514A | M-T2521A | M-T2540A |
| 低能耗反渗透膜 | M-T2514ALE | M-T2521ALE | M-T2540ALE |
| 超低能耗反渗透膜 | M-T2514车轴 | M-T2521车轴 | M-T2540轴 |
| FRP包裹的RO膜 | M-B2514A | M-B2521A | M-B2540A |
| LE FRP RO膜 | M-B2514ALE | M-B2521ALE | M-B2540ALE |
| XLE FRP RO膜 | M-B2514车轴 | M-B2521车轴 | M-B2540轴 |
| 可加热消毒的反渗透膜 | M-B2514HS | M-B2521HS | M-B2540HS |
| NF5纳滤膜 | M-N2514A5 | M-N2521A5 | M-N2540A5 |
| NF9纳滤膜 | M-N2514A9 | M-N2521A9 | M-N2540A9 |
| 中空纤维超滤膜 | M-U2514HF09 | M-U2521HF09 | M-U2540HF09 |
| 聚丙烯腈超滤膜 | M-U2514PAN | M-U2521PAN | M-U2540PAN |
| 聚醚砜超滤膜 | M-U2514PES | M-U2521PES | M-U2540PES |
| 微滤膜 | M-M2514PS20 | M-M2521PS20 | M-M2540PS20 |
Replacement Parts and Accessories for AMI SWRO Housings
Replacement Components
| Model No. | Description | Qty. Needed Per Vessel |
| PV-EP25A-1000E | End Plug With O-Rings (Single) | 2 |
| PV-RC25A-1000E | Retaining Clips with Locking Screws (Set of 2) Complete set for one end. |
2 |
| PV-OR25A-1000E | O-Rings Kit - Complete Set for one Housing Includes 2 Head Seals and 4 PWT Seals |
1 |
| PV-MC25A-1000E | Mounting Components Kit - Set for one housing. Includes 2 each straps, saddles, screws. |
1 |
| PV-EX25A-1000E | End Plug Extraction Tools Kit | |
O-Ring Lubricant for Membrane Housings (Not Included)
Molykote 111 compound is the recommended o-ring lubricant for use in water filters and water treatment systems including reverse osmosis membranes & pressure vessels, and filter housings. The high gade silicone lubricant does not harm the membrane or downstream equipment typically used in reverse osmosis and water treatment systems.
| Model No. | Description | Image |
| H-C111DC | Molykote Compound 111 - 5 Ounce Tube |  |
| H-C111DC-6GM | Molykote Compound 111 - 6 Gram Pillow Pack Sold individually, or in boxes of 100 at bulk pricing |
High Pressure Feed/Brine Port Fittings (Not Included)
|
Model No. |
Description |
Qty. Needed Per Vessel |
 |
|
|
8-4 FTX-SS |
1/4" NPT x 1/2" Flare Fitting |
2 |
||
|
8CM4316 |
1/4" NPT x 1/2" Tube Fitting |
2 |
||
|
8-4 FTX-SS |
8CM4316 |
|||
Obsolete Product Support
Obsolete AMI Pressure Vessels Information - For Reference Only
The below products have been discontinued - there is limited stock available for some models, with availability limited to stock on hand. Contact Us for availability.
AMI 2.5" Seawater Pressure Vessels
|
Model No. |
For Membranes |
Vessel Dimensions |
Connection, FNPT |
|||
|
Outer Diameter (MAX) |
Length |
Feed |
Brine |
Prod |
||
|
PV2514A1000E |
2.5" x 14" |
3.3" |
17.5" |
¼” FNPT |
¼” FNPT |
¼” FNPT |
|
PV2521A1000E |
2.5" x 21" |
3.3" |
24.5" |
¼” FNPT |
¼” FNPT |
¼” FNPT |
|
PV2540A1000E |
2.5 " x 40" |
3.3" |
43.5" |
¼” FNPT |
¼” FNPT |
¼” FNPT |
- Maximum Operating Pressure: 1,200 PSI (68 BAR)
- Operating Temperature: 14°F-150°F
- Materials: FRP/Fiberglass Shell, Stainless Steel End Plugs, Locking Plates, and Screws
|
Model No. |
For Membranes |
Vessel Dimensions |
Connection, FNPT |
||||||||
|
Dia. |
Length |
Dia. |
Length |
Feed |
Brine |
Prod |
|||||
|
in |
cm |
in |
cm |
in |
cm |
in |
cm |
||||
|
F2514-14141000C |
2.5 |
6.4 |
14 |
35.6 |
3.2 |
8.2 |
17.5 |
44.4 |
¼” FNPT |
¼” FNPT |
¼” FNPT |
|
F2521-14141000C |
2.5 |
6.4 |
21 |
53.3 |
3.2 |
8.2 |
24.5 |
62.2 |
¼” FNPT |
¼” FNPT |
¼” FNPT |
|
F2540-14141000C |
2.5 |
6.4 |
40 |
101.6 |
3.2 |
8.2 |
43.5 |
110.5 |
¼” FNPT |
¼” FNPT |
¼” FNPT |
Note: Fiberglass membrane pressure vessels sold complete with end plates and end closure hardware (detailed below). Feed/brine port fittings and mounting hardware are not included.
Spare Parts for Obsolete AMI Vessels
|
Model No. |
Description |
Qty. Per Vessel |
 |
|
RP-20041* |
End Plug for F2514-14141000C, F2521-14141000C, F2540-14141000C |
2 |
|
|
RP-2009.1* |
Locking Kit Segment for F2514-14141000C, F2521-14141000C, F2540-14141000C |
2 sets |
|
|
RP-2012* |
Securing Ring for F2514-14141000C, F2521-14141000C, F2540-14141000C |
2 |
|
|
RP-2010* |
Screws for Securing Ring for F2514-14141000C, F2521-14141000C, F2540-14141000C |
4 |
|
|
RP-56X3.55GGB/T* |
O-ring for F2514-14141000C, F2521-14141000C, F2540-14141000C |
2 |
|
|
RP-19X2.65GGB/T* |
O-ring for F2514-14141000C, F2521-14141000C, F2540-14141000C |
4 |
*Note: Items marked with (*) are included with pressure vessel assembly.