微咸超低能量
AMI 超低能耗反渗透膜元件专为在 100 psi 压力下运行而设计,同时产生的产品流量与标准型号相似。在您的商用反渗透系统中使用这些元件替代标准元件,可以显著降低运营成本。这些元件采用 FRP 硬壳包裹,强度更高,可承受更高的压降。
AMI 反渗透膜元件是业内最优质的产品之一。AMI BWRO 膜元件在全球拥有数十万个 RO 膜元件,其生产基地位于美国,并已通过 ISO 9001:2015 认证。每枚反渗透膜元件在发货前都符合或超越我们严格的性能要求。40 多年来,我们以提供始终如一的高品质产品而享有盛誉,这使得 AMI 膜元件成为反渗透水处理系统的不二之选。
Model No. |
Permeate Flow Rate |
Size |
Single Element Recovery (%) |
Minimum Salt Rejection |
Stabilized Salt Rejection |
|
gpd |
lpd |
|||||
M-B2514AXLE |
190 |
719 |
2.5 x 14 |
10 |
98% |
99% |
M-B2521AXLE |
365 |
1,382 |
2.5 x 21 |
10 |
98% |
99% |
M-B2540AXLE |
850 |
3,217 |
2.5 × 40 |
10 |
98% |
99% |
M-B4014AXLE |
540 |
2,044 |
4.0 × 14 |
10 |
98% |
99% |
M-B4021AXLE |
1,025 |
3,880 |
4.0 × 21 |
10 |
98% |
99% |
M-B4040AXLE |
2,860 |
10,825 |
4.0 × 40 |
10 |
98% |
99% |
Note: Performance specifications based on 2,000 mg/l sodium chloride, 100 psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.
Caution: Do not run these membranes at a pressure that will produce more than their rated product flow rate. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.
Individual Extra-Low Energy Brackish Water RO Membrane Element Photos:
M-B2514AXLE |
M-B2521AXLE |
M-B2540AXLE |
M-B4014AXLE |
M-B4021AXLE |
M-B4040AXLE |
- 通过在较低压力下运行系统来降低运行成本和系统磨损。
- 坚硬的玻璃纤维外壳比胶带包裹的元件具有更高的强度,并且能够承受更高的压降。
- 反渗透膜可去除高达 99% 的总溶解固体。
- RO 膜可去除溶解的杂质,如氯化物、铅、铬酸盐、氟化物、细菌等。
- Extra-Low Energy Membrane Sheet Material for Lower Power Consumption and Operating Costs
- Hard Fiberglass Exterior for Added Strength and Durability
- High Rejection & Flow Rate
- Manufactured in our ISO 9001:2015 Certified Facilities
- 100% Performance and Quality Tested
- Backed by our Experienced Technical Support Staff
- High Quality for Consistent and Reliable Performance
- Uses the most advanced membrane film technology and manufacturing processes
- Standard dimensions to fit in commonly available housings
|
|
相关产品:
排序方式