跳至内容

HL 高 TDS (300 - 9,000 GPD)

HL系列高TDS进水反渗透系统

AMI Small Commercial Reverse Osmosis Systems for High TDS Feed Water

  • 300 至 9,000 加仑/天反渗透系统
  • 给水TDS 1,000 至 5,000 PPM

这些小型商用 RO 系统采用高效薄膜反渗透膜和 FRP 膜外壳,旨在从较高 TDS 自来水或井水中生产出低溶解固体水。

RO 产品水非常适合水库、全屋使用、制冰机、加湿、喷雾和许多其他应用。

作为 L 系列产品家族的一部分(与 L 和 XL 系统并列),这些完整的高 TDS RO 系统所有高压管路和组件均采用耐腐蚀材料。其工作压力在 200 至 250 psi 之间,并采用精心设计的步骤来应对咸水的腐蚀性。

这些系统采用粉末涂层金属框架,并采用久经考验的可靠组件。多年经验积累,不断改进设计,有助于优化膜寿命并减少污垢。

HL系列反渗透系统

HL 系列高 TDS 商用 RO 系统订购信息

RO 系统型号

RO系统
容量

反渗透膜
元素

管线尺寸
(NPT,英寸)

RO系统
尺寸(英寸/厘米)

大约运输重量
(磅/公斤)

国内生产总值

立方米/天

数量

尺寸
(直径×长)

进口

烫发。

浓度

长度

深度

高度

HL-12521A-116

300

1

1

2.5×21

¾

三分之二

三分之二

20/51

24/61

55/140

230/104

HL-125A-116

600

2

1

2.5×40

¾

三分之二

三分之二

20/51

24/61

55/140

240/109

HL-225A-116

1,200

5

2

2.5×40

¾

三分之二

三分之二

20/51

24/61

55/140

250/113

HL-14A-116

1,800

6

1

4×40

¾

½

½

20/51

24/61

55/140

275/125

HL-24A-116

3,000

11

2

4×40

¾

½

½

20/51

24/61

55/140

300/136

HL-34A-216

4,500

17

3

4×40

¾

½

½

20/51

32/82

55/140

325/147

HL-44A-216

6,000

23

4

4×40

¾

½

½

20/51

32/82

55/140

350/159

HL-54A-216

7,500

二十八

5

4×40

¾

½

½

20/51

32/82

55/140

375/170

HL-64A-216

9,000

三十四

6

4×40

¾

½

½

20/51

32/82

55/140

400/181

说明和电压/订购信息

  • 所有尺寸和重量均为近似值。
  • 容量基础: 24 小时/天
  • 系统额定温度为: 77°F (25°C),使用 1000 至 5000 ppm 氯化钠溶液,操作压力约为 200-225 psi。
  • RO系统最低进水压力: 40-60 PSI。系统容量随水温变化显著。
  • 如果进水中含有氯,则必须在进入 RO 系统之前用碳过滤器将其除去。
  • 应使用软化剂或阻垢剂注入对水硬度进行预处理,以避免膜结垢。
  • 进水浊度:小于1 NTU;进水粉尘密度指数 (SDI):最大3。如果超过,建议使用介质过滤器进行预处理。所有预处理设备和SDI测试套件均可从Applied Membranes公司购买。
  • 电压:订购时,请在型号末尾添加我们的电压代码。
    例如:HL-12521-116 = 110v、1 ph、60 hz。
  • 电压代码:
  • 116 = 110v,1ph,60hz(仅适用于 L-24A)
  • 216 = 220/230伏,1相,60赫兹
  • 215 = 220/230伏,1相,50赫兹
  • 三相不可用

推荐的可选预处理设备

  • 碳过滤器
  • 软水器
  • 多介质过滤器
  • 阻垢剂注入
  • 紧凑、经济且可扩展的更高 TDS 给水解决方案
  • 40 多年的经验体现在我们的质量上
  • 紧凑、重型、粉末涂层框架
  • 整个系统使用经过验证的组件
  • 保守设计,确保长期可靠的性能
  • 经过工厂测试,确保无故障运行

Standard Equipment

  • Thin Film Composite RO Membranes
  • FRP Membrane Pressure Vessels
  • 5 Micron 20” Cartridge Filter & Housing
  • Feed Water Temperature
  • Automatic Inlet Feed Solenoid Valve
  • Permeate, Concentrate & Recycle Flowmeters
  • RO System Control Valve, Stainless Steel
  • Recycle Control Valve, Stainless Steel
  • Low Pressure Pump Protection
  • High Pressure Stainless Steel RO Pump
  • Automatic Membrane Flush
  • 4 Liquid Filled Pressure Gauges (Filter IN/OUT + System)
  • Feed & Permeate TDS Displayed on LED Controller
  • RO System ON/OFF with 2-Level Tank Floats
  • Stainless Steel & Corrosion Resistant Materials
  • Powder Coated Carbon Steel Frame
  • Boxed and Palletized for Shipment

Microprocessor Controller for Automatic Operation

Monitors and/or Controls:

  • Inlet Valve
  • Delayed Start-Up of High Pressure Pump
  • Feed Water Flush at System Shut-Down
  • Low Pressure Switch
  • ON/OFF with Tank Level
  • Permeate Water Quality (TDS)
  • Pre-treatment Backwash/Lockout

Controller Features:

  • Backlit LED Display
  • LED Indicator for System Status/Alarm
  • Front Panel Access for TDS Sensor Calibration
  • LED Indicator for Water Quality (TDS)
  • Start-Up & Shut-Down with Tank Level
  • Feed Flush at Shut-Down
  • Low Pressure Shut-Down
  • Low Pressure Automatic Restart
  • Delayed Start-Up of High Pressure Pump

LED Display:

  • Permeate TDS
  • Operating Status
  • Alarm Condition

I-ROC150S

I-ROC150S Commercial Reverse Osmosis Controller

UL Listing Optional

  • Spot Free Rinse/Car Wash
  • Water Stores
  • Whole House
  • Laboratories
  • Large Office
  • Institutions
  • Ice Makers
  • Humidification
  • Misting
  • Commercial
  • Manufacturing
  • Rinse Water
  • And a wide variety of other applications
Reverse Osmosis Water Filtration Systems for Car Wash Spot Free Rinse

Optional Add-On Parts and Equipment for Commercial RO Systems

AMI's HL Series High TDS RO Systems are available with a wide variety of optional add-on equipment. All assemblies include hardware and mounting equipment for easy upgrade to your new or existing system installation.

Wall Mount Filter Cartridges

Wall Mount Prefilter for Commercial RO Systems

Includes mounting bracket and Isolation Valves to close the line when changing the filter cartridge.

Part # A711

Filter cartridge must be ordered separately - common options are shown below. Any 20" Big Blue size cartridge can be installed. Click here to view our complete filter cartridge product selection.

 

Filter Cartridges for Commercial RO Systems Pretreatment Options Available:

  • Block Carbon Filter Cartridges Block Carbon filter cartridges produce no carbon fines.

Post-treatment Options Available:

  • Calcite Filter Cartridge to neutralize the pH of the RO permeate water - Filter Model H-F4220CALCITE Click for Product Details
  • DI Filter Cartridge with Mixed-Bed Deionization Resin for ultrapure applications - Filter Model: H-F4220DI Click for Product Details

 

Softeners & Media Filtration Pre/Post Treatment

Water Softener and Media Filter for Commercial RO Systems AMI Media filters feature fully automatic backwash or regeneration for easy, trouble free maintenance. Ensure superior system operation and extended membrane life by providing proper pretreatment to the incoming feed water on a continuous basis. Common pretreatment or post-treatment methods include:

  • Single or Twin Water Softener to remove hardness and scale.
  • Multi-Media Filter for sediment filtration to approximately 10 microns.
  • Carbon Filter to remove chlorine.
  • Calcite Filter to neutralize the pH of the RO product water.

Click Here to visit the Media Filtration section of our site for detailed information on the full line of media filtration products we carry.

 

Chemical Injection System

Mineral Injection System for RO System Post-treatment Antiscalant injection as an alternative to a water softener for scale control, or

Sodium Metabisulfite injection as an alternative to a carbon filter to remove chlorine.

 

Water Quality Monitors

Water Quality Monitor for Commercial RO SystemsPre-packaged wall-mountable water quality monitoring controls allow you to monitor the quality of the incoming feed or RO product water. Assembly includes the monitor, enclosure and sensor.

Available Options for Monitoring Incoming Feed Water Quality:

  • ORP - 60Hz Part # A246, 50Hz Part # A247
  • pH - 60Hz Part # A244, 50Hz Part # A245

Available Options for Monitoring RO Product Water Quality:

  • Total Dissolved Solids (TDS) - 60Hz Part # A242, 50Hz Part # A243
  • Resistivity - 60Hz Part # A248, 50Hz Part # A249
  • pH - 60Hz Part # A244, 50Hz Part # A245

 

Ultraviolet (UV) Systems

Ultraviolet Disinfection for Commercial RO Systems Add an ultraviolet water sterilizer for a 99.9% reduction of bacteria and viruses in the feed and/or permeate line.

Note: For feed line, wall-mount filter cartridge assembly shown above is required.

 

Tank Pressure Controls

Tank Pressure Controls for Commercial RO Systems To automatically turn the RO system on or off with the permeate storage tank level. For use with a pressurized storage tank (sold separately).

  • 220v/60Hz - Part # A621

 

Pressurized Storage Tank

Pressurized Storage Tank for Commercial RO SystemsPressurized permeate storage tank available in 40 or 80 gallon volume. Assembly includes tank, valve, piping, tubing, and pressure gauge.

  • 40 Gallon Tank Assembly - Part # A612-40
  • 80 Gallon Tank Assembly - Part # A612-80

 

Tank Level Controls

Tank Level Controls for Commercial RO SystemsTurns system on or off according to the water level in an atmospheric storage tank.

  • Dual float assembly provides system on/off controls.
    Part # YFL2PPAS
  • Triple float assembly provides system on/off as well as low level protection on/off for a repressurization pump.
    Part # YFL3PPAS

Atmospheric storage tank and repressurization pump are sold separately.

 

Atmospheric Storage Tank

Atmospheric Storage Tank for Commercial ROAtmospheric Permeate Storage tank. Assembly includes bulkheads and vent filter. For use with Tank Level Controls (sold separately).

  • 200 Gallon Part # A613-200
  • 400 Gallon Part # A613-500

 

Delivery System

20 GPM, 50 PSI, 220v/1ph/50-60Hz

Includes Pump, 40 Gallon Pressure Tank, Controls and Fittings

Part # A606-216

 

Prefilter Pressure Gauge

Prefilter Differential Pressure Gauge for Commercial ROTo allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.

Part # A623

 

Floor Casters Kit

Casters for Commercial RO System2 Locking casters and 2 Swivel casters to mount at the base of the stand for ease of system mobility.

Part #: A625

 

Replacement Parts & Consumables for HL Series Reverse Osmosis Systems