这些高品质商用反渗透系统采用高效反渗透膜,旨在利用自来水或井水生产低溶解固体水。反渗透产水可用于商业和轻工业应用,例如冲洗水、制药、食品加工、瓶装水、酒店、饮料、医院以及各种其他应用。
J系列反渗透水过滤系统采用4”×40”RO膜元件。RO膜外壳压力容器每个容器包含一个或两个反渗透膜元件,并水平安装。
RO系统出厂即刻投入使用。AMI J系列RO系统凭借其高品质和创新设计,赢得了自来水或井水净化领域最可靠、最经济的解决方案的美誉。

J Series Commercial Reverse Osmosis Systems Ordering Information
RO System Model No. |
RO System Capacity |
# of Elements |
Line Sizes |
||||
GPM |
GPD |
m³/hr |
Inlet |
Perm. |
Conc. |
||
J-44A |
5 |
7,000 |
1.1 |
4 |
1 |
¾ |
¾ |
J-54A |
6 |
8,500 |
1.3 |
5 |
1 |
¾ |
¾ |
J-64A |
7 |
10,000 |
1.6 |
6 |
1 |
¾ |
¾ |
J-74A |
8 |
11,500 |
1.8 |
7 |
1 |
¾ |
¾ |
J-84B |
9 |
13,000 |
2.0 |
8 |
1½ |
1 |
¾ |
J-104B |
10 |
14,400 |
2.3 |
10 |
1½ |
1 |
¾ |
J-124B |
12 |
17,300 |
2.7 |
12 |
1½ |
1 |
¾ |
J-144B |
14 |
20,000 |
3.2 |
14 |
1½ |
1 |
¾ |
J-164B |
16 |
23,000 |
3.6 |
16 |
1½ |
1 |
¾ |
J-184B |
18 |
26,000 |
4.1 |
18 |
1½ |
1 |
¾ |
J-204B |
20 |
28,800 |
4.5 |
20 |
1½ |
1 |
¾ |
J Series Commercial Reverse Osmosis Systems Dimensions
RO System Model No. |
Standard System Dimensions |
|
System with CIP Dimensions (in/cm)
|
||||
Length |
Width |
Height |
Length | Width | Height | ||
J-44A |
80/203 |
35/89 |
75/191 |
1,070/485 |
112/285 | 45/114 | 75/191 |
J-54A |
80/203 |
35/89 |
75/191 |
1,130/513 |
112/285 | 45/114 | 75/191 |
J-64A |
80/203 |
35/89 |
75/191 |
1,190/540 |
112/285 | 45/114 | 75/191 |
J-74A |
80/203 |
35/89 |
75/191 |
1,275/578 |
112/285 | 45/114 | 75/191 |
J-84B |
100/254 |
35/89 |
75/191 |
1,410/640 |
132/335 | 45/114 | 75/191 |
J-104B |
100/254 |
35/89 |
75/191 |
1,530/694 |
132/335 | 45/114 | 75/191 |
J-124B |
100/254 |
35/89 |
75/191 |
1,610/776 |
132/335 | 45/114 | 75/191 |
J-144B |
100/254 |
35/89 |
75/191 |
1,830/830 |
132/335 | 45/114 | 75/191 |
J-164B |
100/254 |
35/89 |
75/191 |
1,950/885 |
132/335 | 45/114 | 75/191 |
J-184B |
100/254 |
35/89 |
80/203 |
2,070/939 |
132/335 | 45/114 | 75/191 |
J-204B |
100/254 |
35/89 |
80/203 |
2,190/993 |
132/335 | 45/114 | 75/191 |
Examples of AMI J Series RO System Installations Currently In Service:
Notes and Voltage/ Ordering Information
- All dimensions and weights are approximate.
- RO System Capacity Basis: 24 hrs/day.
- RO Systems rated at: 77°F (25°C) using 2000 ppm sodium chloride solution operating at approx. 225-250 psi pressure.
- Minimum feed pressure to RO System: 40-60 PSI.
- RO System capacity changes significantly with water temperature.
- For higher TDS a water analysis must be supplied and could result in modifications to the RO system design.
- Chlorine must be removed with a carbon filter or with chemical injection prior to the RO system, if present in feed water.
- Pretreatment for water hardness using a softener or antiscalant injection should be added to avoid scaling the RO membranes.
- Feed water turbidity: Less than 1 NTU; Feed water silt density index (SDI): 3 maximum. If exceeded, pretreatment with media filter recommended. All pretreatment equipment and SDI test kits are available from Applied Membranes.
Please add our voltage codes to the end of the model number when ordering:
Example: J-84B-236 = 220/230v/3 ph/60 Hz
Voltage Codes: (Single Phase Not Available) |
|
|
|
Standard Equipment
|
|
Microprocessor Controller for Automatic Operation
Monitors and/or Controls:
Controller Features:
|
UL508A LabeledI-ROC150S
LED Display:
|
|
|
选装设备
|
|
替换零件和耗材
排序方式