跳至内容

Myron L Analog RO Meters, DS Meters, pDS Meters

Myron L Company DS Meters™ 提供快速、准确的现场总溶解固体 (TDS) 或电导率测量。pDS Meters™ 可测试电导率、TDS 和 pH 值。其高度稳定的电路读数有助于确保产品质量、防止设备损坏,并在各种应用中验证在线仪表。

RO 仪表专为演示和测试使用点 (POU) 反渗透或蒸馏系统而设计。通过测量电导率,它可以快速测定任何饮用水的百万分率/总溶解固体 (ppm/TDS)。只需进行一次“前后”测试,这款便捷的设备即可有效演示您的 RO 或蒸馏系统如何去除有害溶解固体。它还可以用于维护测试系统,包括膜评估程序。

DS Conductivity/TDS Meters by Myron L

Model No.

Meter Type

# of Ranges

Range(s)

532T1

DS TDS Meter

3

0-50, 500, 5,000 ppm

532T2

DS TDS Meter

3

0-25, 250, 2,500 ppm

512T5

DS TDS Meter

1

0-5,000 ppm

512T10

DS TDS Meter

1

0-10,000 ppm

EP

DS Conductivity/Resistivity Meter

5

0-0.5, 5, 50, 500, 5,000 µM/µS; 2-30 MΩ

EP-10

DS Conductivity Meter

4

0-10, 100, 1,000, 10,000 µM/µS

532M1

DS Conductivity Meter

3

0-50, 500, 5,000 µM/µS

Myron L Analog DS TDS Meter 532T1

Myron L Analog DS TDS Meter 532T2

Myron L Analog DS Conductivity Meter 532M1

532T1 532T2 532M1

 

 

pDS pH/Conductivity/TDS Meters by Myron L 

Model No.

Meter Type

# of Ranges

Range(s)

T2/PH

pDS pH/TDS Meter

3

0-50, 500, 5,000 ppm; 2-12 pH

T6/PH

pDS pH/TDS Meter

1

0-5,000 ppm; 2-12 pH

EP11/PH

pDS pH/Conductivity Meter

4

  0-10, 100, 1,000, 10,000 µM/µS;  2-12 pH

Myron L Analog pDS pH and TDS Meter - T6/PH

Myron L Analog pDS pH and Conductivity Meter - EP11/PH

T2/PH T6/PH EP11/PH

 

 

RO METER™ Reverse Osmosis Meters for Measuring Total Dissolved Solids by Myron L 

Model No.

Description

RO-1

RO METER™ TDS Meter:  0-1,250 ppm (with color band), Single Range

RO-1NC

RO METER™ TDS Meter:  0-1,250 ppm (no color band), Single Range

Myron L Analog RO Meter Reverse Osmosis TDS Meter RO-1

RO-1
  • 只需 3 个简单步骤即可进行快速、准确的现场测量:

Myron L Analog Water Quality Test Instruments
冲洗并填充细胞杯

Myron L Analog Water Quality Test Instruments
选择电导率/TDS 范围

Myron L Analog Water Quality Test Instruments
按下按钮指示读数

  • 电子内标,方便现场校准
  • 快速自动温度补偿
  • 坚固的设计,可进行多年无故障测试
  • Myron L 仪器为池杯内的 pH 和电导率电极提供最大程度的保护,以减少因破损而导致传感器故障的可能性。
  • pH 电极可由用户更换
  • ATC Automatic Temperature Compensation (to 25°C/77°F) for conductivity samples
    between 10-71°C/50-160°F
  • Readout:  2½” Taut-band shock resistant meter
  • Conductivity/TDS Accuracy: ±2% of full scale
  • pH Accuracy: ± 0.2 pH units
  • Repeatability: ±1%
  • Built-in Conductivity Electrodes:  Never need replatinizing
  • Built-in pH Electrodes: KCI gel-filled, field replaceable
  • Chip and crack resistant polyethylene cell cup
  • Stable solid-state circuitry requires minimal recalibration, sealed against moisture
  • Powered by one 9-volt battery (included); Battery life: >2000 tests/1 year

USA

  • 锅炉和冷却塔
  • 反渗透
  • 去离子
  • 化学浓度
  • 印刷润版液
  • 游泳池
  • 水疗中心
  • 水污染控制
  • 废水

Accessories and Replacement Parts for Myron L Digital Testers

Model No.

Description

RE-10

Range Extender to increase conductivity/TDS range by a factor of 10 when inserted into the sample filled cell cup.  (Not available for model 512T10)

Myron L TDS Meter Range Extender RE-10

PTP

Small hard foam-lined protective carry case.  For all analog handheld models.

Myron L Carrying Case for Analog Water Testers PTP

“MC-“
(varies)

Certificates confirming the NIST traceability of a pDS or DS Meter  are available. 
(Must be specified when placing instrument order.)

Myron L pDS or DS Meter NIST Certificate

RPY

Replacement pH Sensor

Myron L Analog Tester Replacement pH Sensor

 

Related Products