自来水低能耗
AMI 低能耗反渗透膜元件经过特殊设计，可在 150 psi 压力下运行，同时产生与标准元件相同的产水量。在您的商用反渗透系统中使用这些元件，可显著降低运营成本。适用于自来水应用。
AMI 反渗透膜元件是业内最优质的产品之一。AMI 反渗透膜元件在全球拥有数十万个正在运行的反渗透膜，其生产基地位于美国，并已通过 ISO 9001:2015 认证。每枚反渗透膜元件在发货前都符合或超越我们严格的性能要求。在过去的 30 年里，我们以提供始终如一的高品质产品而享有盛誉，这使得 AMI 反渗透膜元件成为反渗透水处理系统的不二之选。
|
Model No. |
Permeate Flow Rate |
Size |
Single Element Recovery (%) |
Stabilized Salt Rejection (%) |
|
|
gpd |
lpd |
||||
|
M-T2026ALE |
450 |
1703 |
2.0 × 26 |
10 |
99 |
|
M-T2514ALE |
264 |
999 |
2.5 × 14 |
5 |
99 |
|
M-T2521ALE |
450 |
1703 |
2.5 × 21 |
8 |
99 |
|
M-T2540ALE |
1000 |
3785 |
2.5 × 40 |
15 |
99 |
|
M-T4014ALE |
610 |
2309 |
4.0 × 14 |
5 |
99 |
|
M-T4021ALE |
1148 |
4345 |
4.0 × 21 |
8 |
99 |
|
M-T4040ALE |
2900 |
10976 |
4.0 × 40 |
15 |
99 |
Note: Performance specifications based on 2,000 mg/l sodium chloride, 150psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.
Caution: Do not run these membranes at a pressure that will produce more than their rated product flow rate. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.
Individual Low Energy RO Membrane Element Photos:
|
M-T2013ALE |
M-T2026ALE |
M-T2514ALE |
|
M-T2521ALE |
M-T2540ALE |
M-T4014ALE |
|
M-T4021ALE |
M-T4040ALE |
- 通过在较低压力下运行系统来降低运行成本和系统磨损。
- 反渗透膜可去除高达 99% 的总溶解固体。
- RO 膜可去除溶解的杂质，如氯化物、铅、铬酸盐、氟化物、细菌等。
- Low Energy Membrane Sheet Material for Lower Power Consumption and Operating Costs
- High Rejection & Flow Rate
- Manufactured in our ISO 9001:2015 Certified Facilities
- 100% Performance and Quality Tested
- Backed by our Experienced Technical Support Staff
- High Quality for Consistent and Reliable Performance
- Uses the most advanced membrane film technology and manufacturing processes
- Standard dimensions to fit in commonly available housings
|
|
相关产品：