跳至内容

壁挂式高TDS系列

适用于高TDS应用的壁挂式反渗透系统

AMI Wall Mount High TDS Reverse Osmosis System

这些壁挂式 RO 系统采用高效反渗透膜,旨在从高 TDS 自来水或井水中生产出低溶解固体水。

RO 产品水用途广泛,例如无斑点冲洗、水库、全屋系统、实验室、制冰机、加湿、喷雾等。

壁挂式高TDS RO系统

WMH 系列壁挂式高 TDS RO 系统订购详情

RO 系统型号

RO系统
容量

反渗透膜
元素

入口/出口管线尺寸(NPT,英寸) RO系统
尺寸(英寸/厘米)
大约运输重量
(磅/公斤)
国内生产总值 立方米/天 数量 尺寸
(直径×长)
进口 渗透 集中 长度 深度 高度

WMH-14A-116

2000

8

1

4×40

½

三分之二

¼

34/86

12/30

52/132

152/69

WMH-24A-116

4000

15

2

4×40

½

三分之二

¼

34/86

12/30

52/132

175/79

说明和电压/订购信息

  • 所有尺寸和重量均为近似值。
  • 容量基础: 24 小时/天
  • 系统额定温度为: 77°F (25°C),使用 5000 ppm 氯化钠溶液,操作压力约为 200-250 psi。
  • RO系统最低进水压力: 40-60 PSI。系统容量随水温变化显著。
  • 如果进水中含有氯,则必须在进入 RO 系统之前用碳过滤器将其除去。
  • 应使用软化剂或阻垢剂注入对水硬度进行预处理,以避免膜结垢。
  • 进水浊度:小于1 NTU;进水粉尘密度指数 (SDI):最大3。如果超过,建议使用介质过滤器进行预处理。所有预处理设备和SDI测试套件均可从Applied Membranes公司购买。

电压代码以上型号表示每个型号推荐的电压代码。

可用电压:

116 = 120V/1ph/60hz • 215 = 220V/1ph/50hz。
216 = 220 或 230V/1ph/60hz •三相不可用。

  • The convenient, space efficient wall mountable reverse osmosis systems are substantially lower in cost than frame-mounted RO systems and are more cost-effective to ship.
  • WMH Series RO systems are expandable to allow for quick, easy and cost effective upgrades to systems in the field. Simply purchase and install the appropriate expansion kit assembly to increase your system capacity at any time down the road.
  • These reverse osmosis systems use the proven, reliable components and are mounted on a sturdy powder-coated metal mounting backplate. There are numerous design details learned from years of experience that are incorporated in our water filtration systems. Our process and fluid design ensures an optimum membrane life and minimizes the membrane fouling.
  • Over 40 years of experience is reflected in our quality
  • Compact, heavy-duty, powder coated frame
  • Proven components used throughout the system
  • Conservatively engineered for reliable, long term performance
  • Factory tested to ensure trouble-free operation
  • Over 10,000 commercial/industrial systems in operation in over 100 countries worldwide
  • Made in USA

AMI Wall Mount RO System for High TDS Water - WMH Series

Standard Equipment

Controller for Automatic Operation

  • Thin Film Composite RO Membranes
  • FRP RO membrane pressure vessels
  • 5 micron cartridge filter & housing
  • Automatic inlet feed solenoid valve
  • System control valve, Stainless Steel
  • Recycle control valve, Stainless Steel
  • Low pressure pump protection
  • Rotary vane high pressure Stainless Steel RO pump
  • Liquid filled system pressure gauge
  • Powder coated carbon steel frame
  • Boxed and palletized for shipment

Controller Features:

  • Panel mounted on/off switch

Monitors and/or Controls:

  • Inlet valve
  • Low pressure switch
  • Low pressure auto restart after 1 hour
  • Feed water flush at system shut-down
  • On/Off with tank level
  • Pre-treatment backwash/lockout
  • System On/Off according to Tank Level (Float purchase separately)

Indicator Lights:

  • Service run/system flush
  • Storage tank full/pretreatment lockout
  • Low pressure shutdown/auto restart

 

AMI Wall Mount Reverse Osmosis System Controller PLC for WM Series

UL508A Labeled I-ROC250    |    PLC for WM Series

  • Spot free rinse
  • Water stores
  • Whole house
  • Laboratories
  • Light commercial
  • Institutions
  • Rinse Water
  • Ice makers
  • Humidification
  • Misting
  • And a wide variety of other applications

 

Reverse Osmosis Systems for Carwash Spot-Free Rinse

Optional Add-On Parts and Equipment for Wall Mount RO Systems

AMI's WM Series Wall Mount RO Systems are available with a wide variety of optional add-on accessories. All assemblies include hardware and mounting equipment for easy upgrade to your new or existing system installation.

Wall Mount Prefilter for Wall Mount RO SystemsWall Mount Filter Cartridges

Includes mounting bracket and Isolation Valves to close the line when changing the filter cartridge.

Part # A711

Filter cartridge must be ordered separately - common options are shown below. Any 20" Big Blue size cartridge can be installed. Click here to view our complete filter cartridge product selection.

Filter Cartridges for Wall Mount RO Systems Pretreatment Options Available:

  • Block Carbon Filter Cartridges Block Carbon filter cartridges produce no carbon fines.

Post-treatment Options Available:

  • Calcite Filter Cartridge to neutralize the pH of the RO permeate water - Filter Model H-F4220CALCITE Click for Product Details
  • DI Filter Cartridge with Mixed-Bed Deionization Resin for ultrapure applications - Filter Model: H-F4220DI Click for Product Details

Softeners & Media Filtration Pre/Post Treatment

Water Softener and Media Filter for Wall Mount RO Systems AMI Media filters feature fully automatic backwash or regeneration for easy, trouble free maintenance. Ensure superior system operation and extended membrane life by providing proper pretreatment to the incoming feed water on a continuous basis. Common pretreatment or post-treatment methods include:

  • Single or Twin Water Softener to remove hardness and scale.
  • Multi-Media Filter for sediment filtration to approximately 10 microns.
  • Carbon Filter to remove chlorine.
  • Calcite Filter to neutralize the pH of the RO product water.

Click Here to visit the Media Filtration section of our site for detailed information on the full line of media filtration products we carry.

Mounting Bracket (recommended)

Mounting Bracket for Wall Mount RO SystemsScrew the mounting bracket to the wall first to simplify the mounting of the RO unit. Includes powder coated mounting plate with screws.

  • Part # A616 - for 27"L Units
  • Part # A615 - for 34"L Units

Water Quality Monitors

Water Quality Monitor for Wall Mount RO SystemsPre-packaged wall-mountable water quality monitoring controls allow you to monitor the quality of the incoming feed or RO product water. Assembly includes the monitor, enclosure and sensor.

Available Options for Monitoring Incoming Feed Water Quality:

  • ORP - 60Hz Part # A246, 50Hz Part # A247
  • pH - 60Hz Part # A244, 50Hz Part # A245

Available Options for Monitoring RO Product Water Quality:

  • Total Dissolved Solids (TDS) - 60Hz Part # A242, 50Hz Part # A243
  • Resistivity - 60Hz Part # A248, 50Hz Part # A249
  • pH - 60Hz Part # A244, 50Hz Part # A245

Floor Stand

Stand for Wall Mount RO SystemsUse this free-standing carbon steel powder coated frame to convert the WM unit to a floor unit.
Part # A626

Optional: Floor Stand Casters Kit
2 Locking & 2 Swivel for ease of mobility.
Part # A625

Ultraviolet (UV) Systems

Ultraviolet Disinfection for Wall Mount RO Systems Add an ultraviolet water sterilizer for a 99.9% reduction of bacteria and viruses in the feed and/or permeate line.

Note: For feed line, wall-mount filter cartridge assembly shown above is required.

Tank Pressure Controls

Tank Pressure Controls for Wall Mount RO Systems To automatically turn the RO system on or off with the permeate storage tank level. For use with a pressurized storage tank (sold separately).

  • 220v/60Hz - Part # A621

Pressurized Storage Tank

Pressurized Storage Tank for Wall Mount RO SystemsPressurized permeate storage tank available in 40 or 80 gallon volume. Assembly includes tank, valve, piping, tubing, and pressure gauge.

  • 40 Gallon Tank Assembly - Part # A612-40
  • 80 Gallon Tank Assembly - Part # A612-80

Tank Level Controls

Tank Level Controls for Wall Mount RO SystemsTurns system on or off according to the water level in an atmospheric storage tank.

  • Dual float assembly provides system on/off controls.
    Part # YFL2PPAS
  • Triple float assembly provides system on/off as well as low level protection on/off for a repressurization pump.
    Part # YFL3PPAS

Atmospheric storage tank and repressurization pump are sold separately.

Prefilter Pressure Gauge

Pressure Gauge for Wall Mount RO SystemsTo allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.

  • Part # A623

Flowmeters

Flowmeter for Wall Mount RO SystemsMonitor system flows. Includes mounting bracket and fittings for connection of system tubing.

  • 1-10 GPM Part # A107
  • 0.5-5 GPM Part # A109

To allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.

Replacement Parts & Consumables for WMH Series Reverse Osmosis Systems