壁挂系列

WM系列壁挂式RO系统订购详情

说明和电压/订购信息

• 所有尺寸和重量均为近似值。
• 容量基础： 24 小时/天
• 系统额定温度为： 77°F (25°C)，使用 1000 ppm 氯化钠溶液，工作压力约为 175 psi。
• RO系统最低进水压力： 40 PSI。系统容量随水温变化显著。
• 如果进水中含有氯，则必须在进入 RO 系统之前用碳过滤器将其除去。
• 应使用软化剂或阻垢剂注入对水硬度进行预处理，以避免膜结垢。
• 进水浊度：小于1 NTU；进水粉尘密度指数 (SDI)：最大3。如果超过，建议使用介质过滤器进行预处理。所有预处理设备和SDI测试套件均可从Applied Membranes公司购买。

电压：以上型号标示了各型号推荐使用的电压代码。可选电压：
• 116 = 120V/1ph/60hz • 215 = 220V/1ph/50hz。
• 216 = 220 或 230V/1ph/60hz •三相不可用。

PLC based controller

Optional Add-On Parts and Equipment for Wall Mount RO Systems

AMI's WM Series Wall Mount RO Systems are available with a wide variety of optional add-on accessories. All assemblies include hardware and mounting equipment for easy upgrade to your new or existing system installation.

Wall Mount Filter Cartridges

Includes mounting bracket and Isolation Valves to close the line when changing the filter cartridge.

Part # A711

Filter cartridge must be ordered separately - common options are shown below. Any 20" Big Blue size cartridge can be installed. Click here to view our complete filter cartridge product selection.

Pretreatment Options Available:

• Sediment Filters in a variety of micron ratings -
• 1 Micron: H-F20BB01CF
• 5 Micron H-F20BB05CF
• 10 Micron: H-F20BB10CF
• 30 Micron: 155430-43
• 75/25 Micron Dual Rated: 155356-43
• 100 Micron: 355226-43

• Scale Inhibitor Cartridges: H-F4220-NS

• Block Carbon Filter Cartridges Block Carbon filter cartridges produce no carbon fines.
• KX Brand: 32-425-125-20. Click for Product Details

Post-treatment Options Available:

• Calcite Filter Cartridge to neutralize the pH of the RO permeate water - Filter Model H-F4220CALCITE Click for Product Details

• DI Filter Cartridge with Mixed-Bed Deionization Resin for ultrapure applications - Filter Model: H-F4220DI Click for Product Details

Softeners & Media Filtration Pre/Post Treatment

AMI Media filters feature fully automatic backwash or regeneration for easy, trouble free maintenance. Ensure superior system operation and extended membrane life by providing proper pretreatment to the incoming feed water on a continuous basis. Common pretreatment or post-treatment methods include:

• Single or Twin Water Softener to remove hardness and scale.
• Multi-Media Filter for sediment filtration to approximately 10 microns.
• Carbon Filter to remove chlorine.
• Calcite Filter to neutralize the pH of the RO product water.

Click Here to visit the Media Filtration section of our site for detailed information on the full line of media filtration products we carry.

Mounting Bracket (recommended)

Screw the mounting bracket to the wall first to simplify the mounting of the RO unit. Includes powder coated mounting plate with screws.

• Part # A616 - for 27"L Units
• Part # A615 - for 34"L Units

Water Quality Monitors

Pre-packaged wall-mountable water quality monitoring controls allow you to monitor the quality of the incoming feed or RO product water. Assembly includes the monitor, enclosure and sensor.

Available Options for Monitoring Incoming Feed Water Quality:

• ORP - 60Hz Part # A246, 50Hz Part # A247
• pH - 60Hz Part # A244, 50Hz Part # A245

Available Options for Monitoring RO Product Water Quality:

• Total Dissolved Solids (TDS) - 60Hz Part # A242, 50Hz Part # A243
• Resistivity - 60Hz Part # A248, 50Hz Part # A249
• pH - 60Hz Part # A244, 50Hz Part # A245

Floor Stand

Use this free-standing carbon steel powder coated frame to convert the WM unit to a floor unit.
Part # A626

Optional: Floor Stand Casters Kit
2 Locking & 2 Swivel for ease of mobility.
Part # A625

Ultraviolet (UV) Systems

Add an ultraviolet water sterilizer for a 99.9% reduction of bacteria and viruses in the feed and/or permeate line.

Note: For feed line, wall-mount filter cartridge assembly shown above is required.

Tank Pressure Controls

To automatically turn the RO system on or off with the permeate storage tank level. For use with a pressurized storage tank (sold separately).

• 220v/60Hz - Part # A621

Pressurized Storage Tank

Pressurized permeate storage tank available in 40 or 80 gallon volume. Assembly includes tank, valve, piping, tubing, and pressure gauge.

• 40 Gallon Tank Assembly - Part # A612-40
• 80 Gallon Tank Assembly - Part # A612-80

Tank Level Controls

Turns system on or off according to the water level in an atmospheric storage tank.

• Dual float assembly provides system on/off controls.
  Part # YFL2PPAS
• Triple float assembly provides system on/off as well as low level protection on/off for a repressurization pump.
  Part # YFL3PPAS

Atmospheric storage tank and repressurization pump are sold separately.

Prefilter Pressure Gauge

To allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.

• Part # A623

Flowmeters

Monitor system flows. Includes mounting bracket and fittings for connection of system tubing.

• 1-10 GPM Part # A107
• 0.5-5 GPM Part # A109

To allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.

Replacement Parts & Consumables for WM Series Reverse Osmosis Systems

• Replacement Reverse Osmosis Membranes for Wall Mount RO System
• Replacement Membrane Pressure Vessels for Wall Mount RO System
• Replacement Sediment Filters for Wall Mount RO System
• Replacement Carbon Filters for Wall Mount RO System
• Replacement Filter Housings for Wall Mount RO System 
• Replacement Components for Wall Mount RO System 
• Membrane Cleaning Cartridges for Wall Mount RO System

• WM系列壁挂式RO系统宣传册
• AMI 膜水处理系统目录
• 什么是反渗透？（关于RO - 技术文章）